similar to: SoftHangup on asterisk 1.8.2.3

When I place an outbound call from asterisk 1.6.1.12 to a FXO port on my Cisco 1760V 12.4, the channel changes - seemingly incrementing: e.g., in the first call, below, the channel name is "SIP/vgw1-00000075" -- the second call (on the same FXO port after a soft hangup on the CLI) is "SIP/vgw1-00000077" How can I extract this information in the dialplan so that I can use

Hi, I have a SPA-3000 and would like to use the 911 recipe from http://www.voip-info.org/wiki-Asterisk+tips+911. So I took the simple recipe and modified it slightly: exten => 911,1,ChanIsAvail(SIP/potsoutbound) exten => 911,2,Dial(SIP/potsoutbound/911) exten => 911,3,Hangup() exten => 911,102,SoftHangup(SIP/potsoutbound) exten => 911,103,Wait(1) exten => 911,104,Goto(1) Now,

Hi, Is it possible to softhangup a channel based on priority. I mean I want to put some calls in higher priority lets say 100. If all channels are busy and somebody wants to dial an extension with priority higher than 100. How can softhangup drop a line which has priority less than 100? I will appreciate your valuable help. Thanks Smir

using asterisk 11.6.0-rc1 i just converted my "nat=yes" to "nat=auto_force_rport,auto_comedia" I have my asterisk box on the same subnet as a cisco 1760 (vgw1). a few times per day, Asterisk thinks vgw1 is dead (by qualify/options). A 'sip reload' always fixes the problem. i left 'sip set debug peer vgw1' on the console. but i dont see what's

Hi all, I am trying to drop a random channel in asterisk 1.6. The following line in extensions.conf works fine for the first channel exten => 911,4,SoftHangup(DAHDI/1-1) But I need to drop random channel for emergency not any specific one. Can someone show correct syntax for this Thanks smir

Hi, I am trying to implement 911 funtionality in my PBX. A call should drop if all lines are busy. Here is my context nineoneone from extensions.conf [nineoneone] exten => s,1,Set(SET_EMERG_FLAG=0) exten => s,n(checkavail),ChanIsAvail(${EMERGENCY_TRUNK}) exten => s,n,Set(EMERGENCY=1,g) exten => s,n,Set(SET_EMERG_FLAG=1) exten => s,n(dial),Dial(${EMERGENCY_TRUNK}/${EMERGENCY_NUM})

I upgraded from a perfectly working 1.6.2 asterisk installation (including fax via app_fax_digium) to 1.8.0 this evening. All my custom modules (including swift <thanks darren!>) are working fine except for fax. When a caller connects, asterisk switches to the fax context and hangs up the call. i've captured with: core set verbose 10 core set debug 10 fax set debug on sip

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]

I am sure many of you have seen my post asking question that I cannot seem to resolve. While the responses i have been getting have been helpful i still cannot seem to get this working 100%. So I have waving the white flag here. I give up. I need someone to come to my office and help me get this working. If anyone is interested the office is in Lexington KY. If someone is interested we can

Todd How do you have the context in the phones sip configs set? Bryant From: "Todd Reese" treese65 at gmail.com Hi all, I've been have problems with getting this system on line and would like to acquire some help with the extensions.conf. My current problem is that the phones won't dialout.on the VOIP lines listed as dialout1, dialout2, dialout3. This version of asterisk

I have 3 analog trunks zap/1, zap/4 and zap/5. zap/5 is the least used line. Would the following work for 911 calls? [e911] exten => 911,1,ChanIsAvail(Zap/1) exten => 911,2,Dial(Zap/1/911) exten => 911,3,Hangup() exten => 911,102,ChanIsAvail(Zap/4) exten => 911,103,Dial(Zap/4/911) exten => 911,104,Hangup() exten => 911,203,ChanIsAvail(Zap/5) exten =>

Hi, I'm wondering if someone can share their thoughts on how to implement a system that periodically checks active channels which have been up for more than X minutes and plays/injects a sound file. The idea is to simply warn users that they've been on the phone for quite a while and maybe they should consider hanging up. If the call stays up for more than Y minutes, it is dropped

Hi there, here is my attempt to initiate a "restart when convenient" from a software SIP phone. exten => 588,1,Answer exten => 588,2,Wait(1) exten => 588,3,Playback(restart-convenient) exten => 588,4,Wait(1) exten => 588,5,Authenticate(00000) exten => 588,6,System(/usr/sbin/asterisk -rx "restart when convenient") exten => 588,7,Hangup The problem: We

when i issue asterisk -vvv command i get this error please help regards Barbra [app_softhangup.so] => (Hangs up the requested channel) == Registered application 'SoftHangup' [codec_lpc10.so] => (LPC10 2.4kbps (signed linear) Voice Coder) == Registered translator 'lpc10tolin' from format 7 to 6, cost 50 == Registered translator 'lintolpc10' from format 6 to 7,

Hello, Most traditional PBX-es have the ability to use external audio source (e.g. radio tuner) for music on hold. This is also useful because you can let your users listen to radio by dialing some extension. I wanted to achieve the same on asterisk, and chan_alsa seemed the logical choice. I installed ALSA drivers, connected the radio to line-in and added the folowing to extensions.conf: exten

Took some examples from voip-info.org to deal with call forwarding etc: exten => _*21*X.,1,NoOp(Unconditional Call Forward on extension ${CALLERID(num)} to ${EXTEN:4}) exten => _*21*X.,n,Set(DB(CFIM/${CALLERID(num)})=${EXTEN:4}) exten => _*21*X.,n,Hangup() Problem is that * don't hangup cleanly: Spawn extension (default, *21*2403, 3) exited non-zero on 'SIP/2401-081e7048'

Hi, is it possible to hangup a channel from another channel? I want to finish a call from another channel, but if I put exten => h,n,HangUp(channelname) it doesn't hangup... Is that correct? Thanks, _________________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL:

So, tweaking configs, rebuilding this and that... restarting, twiddling, it works (yeah!), but fails on re-boot to work at all. Consistently, though. I believe it comes down to this: I can call out only *after* I've received a call. So, cold boot. Then: modprobe dahdi modprobe wctc4xxp modprobe wcfxo dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.3

The Asterisk Development Team has announced the release of Asterisk 1.6.2.18. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ The release of Asterisk 1.6.2.18 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this

The Asterisk Development Team has announced the release of Asterisk 1.6.2.18. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ The release of Asterisk 1.6.2.18 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this