similar to: Outgoing FXO calls have no audio with callprogress=no

I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS modules. I'm trying to set-up things to route analog fax calls from a FXO port to an analog fax machine on a FXS port on the same card. Outgoing faxes work just fine. But incoming faces are routed to the right DAHDI extension, but the call dropped right as the fax machine rings for the first time. The fax machine

[18884732963 at from-fax-machine:... - your call is hitting the from-fax-machine context - yet your 'fax' exten is in the from-pstn-4 context. See the "[2011-03-17 13:40:29.6] NOTICE[8825] chan_dahdi.c: Fax detected, but no fax extension" line. When Asterisk detects an incoming fax tone - it tries to automagically route the call to the 'fax' extension in the SAME

I've upgraded to asterisk-1.6.0-beta2. I'm trying to get the new Telco MWI detection function working. It doesn't appear to be working. I have this in zapata.conf ; PSTN connected here ;immediate=no ;busydetect=yes ;busycount=8 ;musiconhold=default mwimonitor=yes ;mwilevel=512 mwimonitornotify=/usr/local/sbin/zapnotify.sh faxdetect=incoming signalling=fxs_ks context=incoming

I've been having trouble with making outbound calls to my TELCO from a TDM400 card (FXS KS signalling) after upgrading from 1.6-beta9 to 1.6.0. The problem is completely intermittent. When it fails, I get this message: [Nov 9 19:12:26] WARNING[18916] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) At some point, it starts working, but I don't know what

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Hi, Using 1.4.26.1 & DAHDI 2.2.0.2, FSK VMWI devices off a TDM840 work fine. With 1.6.1.[45] & same DAHDI, instead of the FSK spill I get a line polarity reversal. Stutter dialtone is generated as expected. Has anyone else seen this? Is there anything special I need to do for 1.6.1 to make FSK MWI work? Thanks, --Barry

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

I'm trying to get the Telco MWI recognition working in asterisk-1.6-beta7. I'm told that it's supposed to work provided my telco support FSK MWI signalling. I have Verzon FIOS. I believe I have FSK MWI signaling as I can hear the standard stutter tone when I pick up a live handset in front of my asterisk connection. I have the Verizon line attached to a TDM400 card, port 4. I

I have a 'CONGESTION' Status with R2 protocol. While testing this scenario sip GW--?Asterisk ?Digium E1 R2 Protocol?Cisco E1 R2 protocol?sip Gw Find below my error and configuration ,where are the errors in my configuration ? ========================================================================= Connected to Asterisk SVN-branch-1.6.2-r235775 currently running on

I'm struggling to get my dialplan to work with a simple analog fax machine. I have TDM400B zaptel card with an FXO and FXS port. I have the FXO port connected to the POTS machine and the FAX machine connected to the FXS port. The FAX machine itself works fine, I can FAX outgoing messages fine. I can also dial the FAX extension from the internal context, the FAX machine answers and I

Here is some more stuff to add to the confusion about the "callprogress" option. I currently have my * system operating with a T100P talking to an ADTRAN TSU600 channel bank with 8 FXO ports connecting to the outside world and Grandstream SIP phones as handset extensions. At first I naively set "callprogress=yes" in zapata.conf. The results were typical of what many

>From what I've been reading about the callprogress option, it seems like it will work properly only with a T1 or PRI in the US. Is that correct or are there still issues with call progress detection even if those qualifications are met? Thanks, Shaun Tierney

Hi, Would anyone happen to have experience with the callprogress option? What I'm trying to do is use a couple normal POTS lines in a queue setup where it will call the queue members to pass the call to them. Of course the problem I'm running into is that under normal conditions the lines register as answered immediately and the caller gets transferred to the ringing line which

Location = US asterisk/zaptel from CVS. Updated last week some time. Currently rebuilding with todays checkout. I have 2 fxo channels hooked up to outside standard Bell South phone lines. If I configure as so [channels] context=pstn group = 1 signalling = fxs_ks callprogress = yes channel => 4,3 Then any call routed from asterisk to the outside line will ring, and can be picked up, but *

I'm running Asterisk 1.6.2.1 with DAHDI 2.2.1 using a TDM410P. I have callprogress=yes in chan_dahdi.conf because, from everything I've read, it is needed when using call files over PSTN, which I DO use occasionally. I know that callprogress=yes is "experimental" and causes some issues. We've never experienced any problems when making local calls over PSTN with callprogress

Does anyone have a working patch for the following issue on Asterisk 1.4.26 or an earlier version of 1.6 than 1.6.2? It looks like it got committed somewhere after 1.6.1 was branched and is only available natively in Asterisk 1.6.2.x. https://issues.asterisk.org/view.php?id=12382 I have a crappy Cisco IAD that doesn't seem to be consistent in it's operation when the Analog card

On a test fax: -- Executing [s at incoming-fax:1] Set("DAHDI/4-1", "FAXFILE=/var/spool/asterisk/fax/20110415_1825") in new stack -- Executing [s at incoming-fax:2] Answer("DAHDI/4-1", "") in new stack -- Executing [s at incoming-fax:3] ReceiveFAX("DAHDI/4-1", "/var/spool/asterisk/fax/20110415_1825.tif") in new stack

Asterisk 16 latest DAHDI 3.0.0 latest Excerpt from chan_dahdi.conf is shown below. I'm trying to enable fax detection on inbound calls so that I can take appropriate action in the dial plan. "dahdi show channel 1" shows "Fax Handled: no". Does that mean that I don't have it configured correctly? [channels] ; Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span

Hello, The company I work for recently purchased 2 Rhino CB24s and a Rhino PCI-E R4T1. The channel banks are plugged into the R4T1, as well as 2 PRIs from our telco. The CB24s are for all internal analog phones. Most of the phones are setup in "batphone mode", which is "immediate=on" in the DAHDI config. They are set up this way because we are an outgoing call

Was'nt sure if this mail got through earlier: I have been having a weird issue with my telco's ISDN PRI occasionally resetting on a incoming call, i suspect it to possibly be a timing issue since some of the incoming call work. This problem happens very frequently. I am using asterisk-1.6.0.1 with libpri-1.4.9, the asterisk server is connected viw TDMoE to a Redfone Fonebridge into