similar to: Force Dahdi modules to load

Hello, I have a weird problem between Asterisk 13.3 and a Yeastar U200 pbx over IAX trunk. Should I call from Yeastar to my asterisk 13.3 the call goes through without issues. Should I call from asterisk 13.3 to Yeastar I can hear a ring tone however the yeastar does not show any activities. On the yeastar I initiated a debug command iax2 set debug peer "my trunk name" While I

In particular, I'm comparing these two models: Yeastar NeoGate TG100 vs. Dinstar DWG2000-1G http://www.yeastar.com/products/NeoGate-TG100.asp http://www.dinstar.com/Product/Product_25.aspx?typeid=6 Wich model do you recommend me, Yeastar or Dinstar? Thanks in advance. -- Usuario Linux Registrado # 342019 --> http://linuxcounter.net/ <-- skype --> luedcortes gtalk -->

I am in the process of buying a TDM800 card from Yeastar ( http://www.yeastar.com/products.asp?TypeName=TDM800%20PCI%20Card&cTypeName=1 ) Any one has tested this cards? How reliable are them? I am specially interested in the FXO/FXS module. -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog: http://blog.felisberto.net/ ------------ It's most certainly GNU/Linux,

Dear all, I've read some news about Sisky (http://www.yeastar.com/Products/SiSkyEE.asp), a service to interconnect Skype clients with SIP clients. Does anybody test Sisky and can tell me about his experience ??? (Sisky runs on Windows because Skype and its API are more stable on this OS). Regards, Alejandro

Hello: I'm newbie in asterisk, please help me. My context is as follows: 192.168.4.2 --> Asterisk 11.13.1 complied from source 192.168.4.4 --> Yeastar NeoGate TG100 GSM gateway When I call from a GSM cell phone, my TG100 GSM gateway answers and dials extension 7777 (configured as a hotline on TG100) to asterisk server, but asterisk server sends me "SIP/2.0 401

2014-11-12 2:45 GMT-02:00 Luis Eduardo Cortes <luedcortes at gmail.com>: > Hello: > > I'm newbie in asterisk, please help me. > > My context is as follows: > > 192.168.4.2 --> Asterisk 11.13.1 complied from source > > 192.168.4.4 --> Yeastar NeoGate TG100 GSM gateway > > When I call from a GSM cell phone, my TG100 GSM gateway answers and > dials

I'm trying to get a basic Asterisk configuration together for ISDN incoming / outgoing calls. I have two Cisco 7905g phones working (at least talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing

Hello all, I have the following working (somewhat) setup: TELCO | | E1 (30 Chan -- TE210 SPAN 2) | | Asterisk box 1.6 with DAHDI drivers loaded Digium TE210p | | E1 (30 Chan -- TE210 SPAN 1) | | NEC PBX

Hello I'm trying to install Dahdi through source code on a Fedora 13 host to use an OpenVox PCI card with a single FXO port, but dahdi_cfg -vv isn't happy. 1. After successfully running "make all; make install; make config", I edited /etc/dahdi/system.conf thusly: loadzone=fr defaultzone=fr fxsks=1 2. Then ran "dahdi_cfg -vv" which says: ------------- DAHDI Tools

Hi, I am looking into advising a client on the pro's and cons of using Installing asterisk on a server vs appliance(e.g digium mypbx). the appliance seems cheaper initially.

Hi all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg

Does Asterisk support Radius accounting?.... -----Mensaje original----- De: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] En nombre de asterisk-users-request@lists.digium.com Enviado el: Lunes, 17 de Noviembre de 2003 12:08 p.m. Para: asterisk-users@lists.digium.com Asunto: Asterisk-Users digest, Vol 1 #1912 - 11 msgs Send Asterisk-Users mailing list

I am attempting to get fax detection to work. I am using a NETjet-s card under ISDN4Linux. Asterisk does not seem to be detecting the fax tone. I have tried following as a test: [MainMenu] exten => s,1,Answer exten => s,2,DigitTimeout(3) exten => s,3,ResponseTimeout(5) exten => s,4,Background(Welcome) exten => s,5,Background(MainMenu) exten => fax,1,Dial(Zap/1,,d) [FaxTest]

Hello, I just got my isdn-card working together with i4l and asterisk. Everything seems to be working fine: I can accept calls coming from the outside and I can dial out. Even setting the msn works like charm but my problem is that I cannot hear a word. There's complete silence in both directions. Any idea what could be the cause? Thanks for your help, Gunther Lspci: 0000:01:07.0 Network

the Telco, I can make calls in. What I am trying to get though is how to pass through the DID range. The E1 that I am connecting to the Telco with, used to connect direct to the NEC system and already has hunt group calling enabled for all 30 channels. Also, I was given a 100 number indial range (from 00 -> 99). If the E1 is connected to the NEC directly, I can call 5555 7320 and the NEC

Has anybody ever integrated Skype with Asterisk? If you have, which software would you recommend to accomplish such a task? ChanSkype? And how reliable are the calls? Did the DTMF tones work? Thanks in advance. _________________________________________________________________ Discover sweet stuff waiting for you at the Messenger Cafe.? Claim your treat today!

Panasonic PBX KX-TDA600 it doesn't support SIP protocol for VoIP technology it only support H323 Trunk through 4 or 16 channels gateway card and TDM technology with ISDN BRI and PRI card. Mc GRATH Ricardo

Asterisk - 1.8.4.1 Dahdi-linux - 2.4.1.2 Dahdi-tools - 2.4.1 Kernel: 2.6.37.6 Kernel BKL: enabled I am upgrading Asterisk on this box. It has an OpenVox A400P PCI analog card with 1 FXO and 1FXS module. This server has been running just fine for two years with Asterisk 1.6.1.0 I've just upgraded all the OS and installed Asterisk 1.8.4.1. On trying to configure the A400P I get: # modprobe

Hi all, I have a isue with a Siemens Hicom conected to my asterisk, here is the scheme: Telco ---- Asterisk --- Legacy PBX --- Legacy phones The asterisk box has a TE210 (one PRI conected to Telco another PRI conected to Siemens) Everything works ok, but when I make an international call from legacy phones to the telco, for example: 0034934452740, the Siemens only sends to Asterisk