similar to: No more ISDN in Malaysia Telekom???

Hi list! I already had the problem last year, then it would be solved (surely from some technician by Deutsche Telekom on their servers), and now I have the problem again (but I didn't changed my Asterisk configuration). The problem: after 15 minutes will the call dropped, but only if the call is to another nation! If I just call another phone in Germany, I can speak longer than 15

Hi list! I think there are many german users in this ML, that use Asterisk with the new line of Deutsche Telekom (Magenta Zuhause). My ISDN will be converted in Juli (Kaboom-day at Juli, the 3rd...) and right now I can just hope, that I configured my Asterisk well to work with Deutsche Telekom, but I cannot be sure, since I can't test it... So my question: can someone using Asterisk with

A not so technical friend in India is shopping for a laptop. He often travels and stays months in Malaysia and so needs to be able to use the laptop there as well. He typically connects to the internet via wifi, but sometimes must use a telephone line (yes, with a modem). And of course there will be times when he has to plug into mains power to recharge the battery. So to be able to fully use

Anyone configured a E1 PRI in Kuala Lampur, Malaysia with TM Malaysia? What signaling did they provide, framing, formatting? primary-4ess Lucent 4ESS switch type for the U.S. primary-5ess Lucent 5ESS switch type for the U.S. primary-dms100 Northern Telecom DMS-100 switch type for the U.S. primary-dpnss DPNSS switch type for Europe primary-net5 NET5 switch type for UK,

Hey, We are deploying an Asterisk machine in Malaysia for a client. The machine has a TDM400P with 2 x FXO & 2 x FXS. I'm wondering if there are any Malaysian users out there who might be able to help me out with a running zap config for their phone system. Cheers, Darryl.

Greetings from Hack in The Box -- We are pleased to announce that the Call for Paper (CfP) for HITBSecConf2006 - Malaysia is now open! Set to take place from September 18th - 21st 2006 at The Westin Kuala Lumpur, this years conference promises to once again deliver an International deep-knowledge security conference. HITBSecConf has been described as "the most intimate of hacker

Markus <universe at truemetal.org> schrieb: > I don't think so. Most users will use the router provided by Telekom. These users do NOT use Asterisk on theis Telekom-line... I asked for someone using Asterisk on Magenta Zuhause... :) > Anyway, after 15 seconds of Google'ing for Magenta Zuhause and SIP, > maybe this will help you: I already know these links, and I

AHOI! I've big trouble by setting up CentOS 6.3 for my new vDSL. As I've found out, the German Telekom is using VLAN7 for her internet-(data) connections. => http://workaround.org/blog/vdsl O.K. what I've done: The NIC where's my DSL-modem is connectet is eth0. cat /etc/sysconfig/network-scripts/ifcfg-eth0 # device for vDSL-modem DEVICE=eth0 HWADDR=00:30:1B:14:08:67

Greetings from sunny Malaysia! This is a reminder that the Call for Papers for the upcoming HITBSecConf2007 - Malaysia is closing on the 1st of May. HITBSecConf2007 - Malaysia is set to take place from the 3rd till the 6th of September in Kuala Lumpur. Our event last year attracted over 600 attendees from all corners of the globe and this year we are expecting this number to grow to well over

Hi list! My Problem: all calls to international numbers will be dropped after exactly 15 minutes... I have a VoIP-account by Deutsche Telekom. This is what I see when I call someone (my parents) and the connection will be dropped: == Using SIP RTP CoS mark 5 -- Executing [+39015222222 at default:1] Set("SIP/00493511111111-00000125", "newNumber=0039015222222") in new

Hi all, I have TDM2406E with 24FXO ports connecting to 10 POTS line sitting in my office. the out going calls symptom like when called party pickup the phone but the calling party still hearing the ring tone from the IP phone. Please light me up. it been many sleepless night by googling around trying to get the right answers. The digium card running on Intel 915G chipset. Below are my zaptel

On 7/5/23 03:17AM, Jim Klimov wrote: > Ah, I thought you missed in my earlier reply the part about a bug with debug printouts in 2.8.0 (fixed on master since), > did not comment on that when you replied with quoting... So, for now options are to bump debugging to 3+ or to build > your own in one of many ways possible :\ I think I'm not following you - with debug 3 -->> it

Ah, I thought you missed in my earlier reply the part about a bug with debug printouts in 2.8.0 (fixed on master since), did not comment on that when you replied with quoting... So, for now options are to bump debugging to 3+ or to build your own in one of many ways possible :\ On Wed, Jul 5, 2023, 06:23 Karl Schmidt <karl at lrak.net> wrote: > On 7/4/23 10:01PM, Jim Klimov wrote: >

Ok - I'm wondering is this is a systemd config bit? systemctl restart nut-driver at malaysia.service Job for nut-driver at malaysia.service failed because the control process exited with error code. See "systemctl status nut-driver at malaysia.service" and "journalctl -xeu nut-driver at malaysia.service" for details. root at malaysia:~# systemctl status nut-driver at

Normally yes - enable and start the target and the particular services relevant to your setup. For the binary you have from packaging (if not rebuilt as suggested earlier), set debug_min=3 in ups.conf section for upscode2, to currently trade driver viability for some storage traffic with more logs :\ Sorry about that, Jim On Wed, Jul 5, 2023, 02:29 Karl Schmidt <karl at lrak.net> wrote:

On 7/4/23 10:01PM, Jim Klimov wrote: > Normally yes - enable and start the target and the particular services relevant to your setup. > > For the binary you have from packaging (if not rebuilt as suggested earlier), set debug_min=3 in ups.conf section for > upscode2, to currently trade driver viability for some storage traffic with more logs :\ > > Sorry about?that, > Jim

Am 13.06.2015 um 13:54 schrieb Luca Bertoncello: > I think there are many german users in this ML, that use Asterisk with the > new line of Deutsche Telekom (Magenta Zuhause). I don't think so. Most users will use the router provided by Telekom. Anyway, after 15 seconds of Google'ing for Magenta Zuhause and SIP, maybe this will help you:

> I think there are many german users in this ML, that use Asterisk with the > new line of Deutsche Telekom (Magenta Zuhause). > > My ISDN will be converted in Juli (Kaboom-day at Juli, the 3rd...) and right > now I can just hope, that I configured my Asterisk well to work with Deutsche > Telekom, but I cannot be sure, since I can't test it... > > So my question: can

jg <webaccounts173 at jgoettgens.de> schrieb: > It doesn't really depend on your sip.conf and Asterisk. Your gateway/router > will be the major problem. My summer project will be to look at session Are you sure? Right now I'm using an italian SIP-Provider (Messagenet), configured in my sip.conf and I can receive calls without any problem... So, I don't think, I have to

Zitat von Sebastian Kemper <sebastian_ml at gmx.net>: Hi Sebastian > Brian suggests to check the SIP traces. You can either enable SIP > debugging in Asterisk like so: > > sip set debug on > > Or you could run tcpdump and capture the SIP traffic. > > The first option is probably the easiest. I tried with sip set debug 42 sip set verbose 42 The result was