similar to: 1.8.2: dahdi-2.4: calls dropping

Receiving a fax pstn - pstn with 1.6.2.6-rc2: -- Executing [s at incoming-pstn-line:1] Answer("DAHDI/4-1", "") in new stack -- Executing [s at incoming-pstn-line:2] Wait("DAHDI/4-1", "3") in new stack -- Executing [s at incoming-pstn-line:3] Dial("DAHDI/4-1", "DAHDI/g0,36") in new stack -- Called g0 --

Hi, I'm using a revision 6822-enabled Dahdi-Tools (see https://issues.asterisk.org/view.php?id=13897) with a Junghanns QuadBRI. 1. Do I still need qozap driver ? If positive, how is it recommended to get it ? 2. Which line should be included in /etc/dahdi/modules to have the appropriate driver loaded ? 3. The process I'm planning to use is : A- Hand edit /etc/dadhi/modules,

I have followed the instructions in Asterisk The Definitive Guide 4th edition. ?Once I load DAHDI I run the dahdi show channels command and get no such command. ?I have setup all the conf files. ?I compiled DADHI prior to Asterisk. Any ideas? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

Hi List. I've bought a new server for my home asterisk installation and I'm trying to install asterisk with dahdi drivers and OSLEC. To do that I've got the svn dahdi-linux trunk revision 5366 and the echo subproject from the 2.6.28-rc6 Linux kernel sources. As reported in the dadhi README file I've uncommented out the two OSLEC related lines at Kbuild file in the

Looking for some help from the UK please. I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit. Unfortunately I did not transfer the backup to another machine!!!!! I now have a TDM400P that is not picking up the line. Can you see what I have done wrong when I have rebuilt the config please: dahdi_scan ---------- [1] active=yes alarms=OK

Hi I took a UEFI image of CentOS 7.7, (dahdi runs on the image). copied that to a physical disk with dd, booted the image and dahdi does not start. doing service dahdi restart says "could not insert dahdi module - the required key is not found." How do I get dahdi to be happy ? it is "NOT" possible to disable UEFI on my hardware. Kernel is 3.10.0-1062.12.el7 I saw

Hi, After upgrading to DAHDI 2.4.0 from Zaptel, I noticed a lot of HDLC errors on my console: [Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 [Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 These errors prevented calls from being made and received on my PRI spans. This seems

Hi I am in the process of installing a new box and using dahdi. I have a tdm410 + hardware echo canceller. I have just read in the read me for dadhi that VPMADT032 support has been removed and unlike with the zaptel stuff i could just download and install the firmware I can't with dahdi what is the best way forward to recompile with hardware echo canceller support. Thanks Alex

I've seen this consistently on three systems, with three different cards, and multiple versions of DAHDI. At first I thought the issue only occurred on newer, Nehalem-based, systems, but I reproduced it on a Core 2 Duo box as well. I've tested with dahdi-linux 2.2.0.2, dadhi- linux-complete 2.0.0+2.0.0, 2.1.0.2+2.1.0.2, and 2.2.0.2+2.2.0. The card is a Digium TE220B which uses the

I've got a single TDM 400P board with two internal ports and 1 external. chan_dahdi.conf: context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks not auto Use FXO signalling for FXS group=0 channel => 1 ; Telephone attached to port 1 channel => 2 ; Telephone attached to port 2 context=incoming-pstn-line ; Incoming calls

Has anyone experimented with increasing the DAHDI chunk size in improve fax reliability? If so, did it help, hurt, or not make any difference?

Using Digium fax I've tried a simple dialplan: '8447' => 1. Answer() [pbx_config] 2. Set(CALLERID(num)=xxxyyyzzzz) [pbx_config] 3. Dial(DAHDI/g0/1bbbcccdddd,,G(send)) [pbx_config] [send] 4. SendFax(/var/spool/asterisk/fax/20090922_1301.tif) [pbx_config] 5. HangUp() But I doesn't work. It executes

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm using Asterisk 1.4.24.1 with dahdi-linux-2.1.0.4 and dahdi-tools-2.1.0.2 compiled by myself with the source code of the official site of the project. I would like to update to one more newer version. I suppose that the recommendable thing is to maintain me in branch 1.4, reason why in this case it would be 1.4.30 that I suppose that

Dear all, i have a problem with a system running - Ubuntu 10.04 ( all updates done ) - ii asterisk 1:1.8.5.0-1digium1~lucid Open Source Private Branch Exchange (PBX) - ii asterisk-dahdi 1:1.8.5.0-1digium1~lucid DAHDI devices support for the Asterisk PBX I also use freepbx 2.9 for the configuration. Hardware is a Dell R410 and a Digium

Hi, I've been experiencing trouble with my DAHDI channels for some time and have finally decided to try and resolve the issue. Essentially, the problem I am having is that when a call comes in, and my DAHDI phones therefore ring, Asterisk thinks that one of the handsets has picked up to answer the incoming call - whereas in actual fact it is still on hook. The call then gets instantly

Hi, This is the output from queue show 28: 47 (DAHDI/g0/12345678) (realtime) (Ringing) has taken no calls yet Why is the devicestate "Ringing" when no channels is calling this number, and the queue says "has taken no calls yet"? Is it picking up the general state of a random channel on g0 in dahdi? Or what is happening? It only seems to happen with this particular

In my quest to actually send a fax, I'm now stuck trying to send the confirm. First I send the fax: -- Executing [send at outbound-fax:2] System("Console/dsp", "env echo -e "Channel:DAHDI/g0/12036378447\\nContext:fax-tx\\nExtension: s\\nPriority: 1\\n" >/var/spool/asterisk/outgoing/call-1254012878.0") in new stack -- Auto fallthrough, channel

Hello List, it is a very long time since I wrote here.... It has been still in Zaptel times.... Today I am run into a related problem: I can't get a DAHDI setup to work 100%. I am configuring an Astribank XR00013 (BRI, two ISDN ports). At some degree the installation (latest DAHDI drivers, Asterisk 1.6.0.18 on Centos 5.x) works. I can get incoming calls to the dialplan context that is

Hi! I have an analog line connected to my asterisk and when I try to answer a call I get this -- Starting simple switch on 'DAHDI/7-1' -- Executing [s at from-pstn:1] Answer("DAHDI/7-1", "") in new stack -- Executing [s at from-pstn:2] Playback("DAHDI/7-1", "vm-intro") in new stack -- <DAHDI/7-1> Playing 'vm-intro' (language