similar to: Calling rules

Thank you for the reply. On 8 Dec 2010 at 13:38, Danny (Danny Nicholas <danny at debsinc.com>) commented about RE: [asterisk-users] Configuring Softphone: > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gary Kuznitz > Sent: Wednesday, December 08, 2010 1:27 PM > To: Asterisk

Hi everyone, having a issue with asterisk and my new Voip providers service. Iv set up many asterisk systems before but never seen this and have tried to fix this with no luck.. I have used this exact same sort of setup for 5 other providers and never had this issue, If i replace the trunk login details with my works voip account and set it to IAX then it works perfect, Just not the new

I need some extensions logic assistance, I'm trying to dial out one of multiple SIP trunks, in sequence. I need to detect a busy SIP trunk(I only allow 1 call per trunk) and roll over to a second or third depending on that busy status Here's what I've got for a macro thusfar, but it's not working(fails if the 1st trunk is busy) extensions.conf: [globals] trunk_1 => SIP/trunk1

Hello, We have 2 SIP trunks from Bandwidth.com and if both are in use and someone tries to dial out, they cause another call to get one-way audio (the caller hears us, we cannot hear them). This happens 100% of the time and Bandwidth.com doesn't offer any support. I don't see any setting that tells Asterisk that there are 2 channels available from Bandwidth.com's IP. I'm

I am using an 8 port tdm card and also I implemented a dialer using a .call file generator. As you know on the .call you specify the channel to call and then the contex/extension/priority to let dial plan continue when the call is bridge. My actual problem is that when the call process starts, asterisk (DAHDI) sets the channel as answered when the truth is that on the other side the channel has

Hello all. I have a asterisk implementation (asterisknow 1.7.1), with a card with 2 FXO interfaces. When I call (or receive a call) from the pstn, I ear echo. This happens if I use a softphone or IP phone, and does not happens if the call is internal. Can you help me with this issue? Best regards, Vitor Flausino

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state

Hi, I am attempting to setup an asterisk server, current specs: CentOS release 5 (Final) Asterisk 1.4.11 Asterisk-gui checked out from SVN last week I started with a fairly basic setup involving one VOIP provider who provided one dial in number, and a couple of handsets. Config files are below. It was pretty much totally built by Asterisk-gui, except for the fact I had to add

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

I'm trying to set on-demand call recording. Here's a snippet of the pertinent dialplan. The purpose of this is to allow one user in particular to be able to receive an email recording of the call everytime he dials *91 + number. The problem is that the email is not going out or being generated when I use the ${CALLFILENAME} variable. When I use the actual file name of the gsm recording,

Hi, I have the following dialplan. Problem is, if the user authenticates, * starts counting as billable seconds even if i hangup the phone before the called party answers..And also as disposition.. it accepts all calls authenticated as 'answered' If i commentout the authentication line everything works as it should be. How should i use authentication that, it should accept it as aswered by

I am trying to help a guy out with his Atcom IP04. He has set it up like this. He has a handful of IP phones all connecting via SIP. He has two phone lines connected to the FXO ports one from telecom, another from vodaphone. He has set up the dialplan so that one of the trunks fails over to the other trunk. Everything seems to be working OK except for outgoing calls. He can call from

Update on this: I found that by changing insecure = very to insecure = invite, adding the second trunk no longer stopped calls working. I've read the documentation on this switch and still don't see how it applies/is meant to get used. Anyway, with this change in place, the following may help: asterisk*CLI> sip show registry Host Username

Can anyone tell me why my inbound calls keep getting rejected with 401? Here's the debug information: <--- SIP read from UDP:147.135.32.221:5060 ---> INVITE sip:6087294351 at 216.26.109.22:5060 SIP/2.0 Call-ID: 31007e-31 at 147.135.32.221 CSeq: 1 INVITE From: "Wi M"<sip:4144038968 at 147.135.32.221;user=phone>;tag=9bbc To: "Gregory Malsack"<sip:s at

Hi all, I have *NOW beta 6 (asterisk 1.4.5) and I've configured it with a SIP trunk line. I can make outgoing calls, but I cannot receive any incoming calls. A port scan of my * server shows that port 5060 is closed. How do I open this port? In my users.conf, I have set [trunk_1] to hassip=yes and port=5060. Also, in the global SIP.conf file bindport=5060 bindaddr=0.0.0.0

We have multiple entries like the one below in our users.conf file... where the username. Contact and secret changes for different customers and we register on their behalf to the Service Provider. For the trunk below: when the call is placed out, Asterisk (1.4.18) sends the username of "abc.com" in the MD5 Auth .....which obviously does not match the trunk setup for this Customer with

Hello all. I have installed AsteriskNow 1.7.1-64bits with freePBX. The system has 1 DAHDi card with 2 analog FXO ports (to pstn) and 1 FXS port connected to a FAX machine. I want the every call received on port FXO-2 to be redirected to the FAX machine. So, what I configured was that every call with DID 12345 (let's suppose that 12345 is the DID connected to the FXO-2)to be redirected to the

Hello all. Can you help me find where the CDR's are being stored? The result of "cdr show status" is: Call Detail Record (CDR) settings ---------------------------------- Logging: Enabled Mode: Simple Log unanswered calls: No * Registered Backends ------------------- (none) Best regards, -vcf

Hello all. I have installed AsteriskNow 1.7.1 with all updates. I'm able to make outbound calls without any problem (the external calls are made via an analog line, and the receiver see the CID). However I'm unable to forward incoming calls to the destination I want. What happens is when I make an internal call I ear a "bye". Bellow is the log of the internal call: --

I got no resonses to this and some funny bounces so I'm trying again. First of all Merry Christmas. Second, my first problem with my provider not staying registered with our server was my fault. We moved our server room and I restarted the test system and the production system causing them to ping-pong back and forth registering with our provider causing random problems, they are both