similar to: Sangoma A104d / overlapdial=yes / dial with audio one-way issue

Hi, Recommending to go Digium because of an OpenBSD issue with the Sangoma A104D is quite funny to say the least since neither is the TE407P supported in BSD by Digium. So the recommendation is useless to the person who originally requested for a comparison between the two products. If someone wanted to send back the A104D, he could have taken advantage of Sangoma's 30 day money back

I have a system that I am trying to get a port on a Sangoma A104d card connected to an Adtran 850 with 5 FXS modules and 1 FXO module. A problem I am having is figuring out what cable should be used from the port on the Sangoma to the JP2 port on the Adtran. Tried was a cross-over T1 (1->4, 2->5, 4->1, 5->2) as well as a straight T1 (1->1, 2->2, 4->4, 5->5). Neither one

Hi all, as good? I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 , sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4 But it is not compiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : )

Hi, I am using Asterisk: 1.6.1.20 LibPRI: 1.4.11.4 DAHDI: 2.3.0.1 Echo Canceller: MG2 Wanpipe-Driver: 3.5.15 Sangoma-Firmware: 43 (A104d) I handle some calls with my own PHP-AGI-Script. After a dial-command I use "GET FULL VARIABLE ${answeredtime}" or "GET FULL VARIABLE ${dialstatus}" and get valid information. Sometimes "dialstatus" has the value

Hi all, I need to setup call using particular timeslot on one of E1's. I've looked into http://www.voip-info.org/wiki/index.php?page=Asterisk+Zap+channels and it says that: exten => TestTrakt,1,Dial(ZAP/1-2/517255333) exten => TestTrakt,2,hangup should work and force call setup via span 1 (port 1) but when I try setup call rasterisk says: -- Executing [TestTrakt at

Has anyone had experience with one or both of these cards? I'm in a position where I might need to recommend one over the other. I've read everything that I can find online, so now I'd like to hear of personal experiences. Everything I read on both cards is "5 stars! Awesome! It Rocks!" They both seem to have similar capabilities, similar pricing, etc. Could those of

Hello all, as good? I am trying to use the package astunicall-1.2.21.0.1 with a Sangoma A104D card and 04 links E1 mfc/r2 in Brazil. The compilation occurred, normally and links is UP if I place in Loop and I obtain to effect called in Loop, but when I extend for the PSTN, links reports the following messages, without asterisk start calls: Dec 5 22:27:12 WARNING[3868]: chan_unicall.c:627

Hi Group, I am currently facing a dead end and any help will be much appreciated. I have an a104d installed in an asterisk box, two of which is configured on ISDN pri. One is facing pstn and the other one is facing a hipath 300e Siemens. I am getting one way audio when a local on the hipath tries to make a pstn call but no issue on incoming calls from pstn going to the hipath locals. local

Hey Guy, I have quick question. I am purchasing Sangoma A102D card but i am confused between PCI and PCI Express. Which card would be good for me. Definitely PCI Express is advance but i just want to know is there any major difference, like quality, performance etc.. -Satish -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have the following setup: Ubuntu 12.04.02 LTS (64 bit) Asterisk 11.2.1 Sangoma 4-Port-Card (A104d) with firmware 43 (german e1-ports connected) WANPIPE Release: 3.5.28 DAHDI Version: 2.6.1 Echo Canceller: HWEC libpri version: 1.4.12 I call via sip into the dialplan. Then I do a "Dial(DAHDI/g1/voicenumber,r)". The call is bridged and everything is fine. "dahdi show

Hi ! We curently have a centos 5 / asterisk 1.4 server that we have some DTMF problems with. It has a Sangoma A104d card and only port one is used to connect to the PSTN. Port 2 is conencted via a cross-over cable to a RAS for modem access and port 3 is connected for data communication via PPP. Now, I want to freshen this setup to something newer. So I installed a Scientific Linux 6 server,

Hi Thank you for your support. The server is actually compromised, I discovered that after making a deep trace using the audit daemon and looking for the kill signal (SIGKILL) that terminates asterisk. I discovered that there is an executable with a random name in the /boot folder that is killing and deleting asterisk !!! This executable is launched by a service in /etc/rc.d/ with the same

We have several Sangoma cards that we used during a transition time in our the replacement of our legacy voice system that we no longer need. Each of them saw about a month of service and are in good working order. We'd be happy to get 70% of retail for them. They are as follows: qty 2 A104D PCI w/ on board echo cancelation - $1500 each qty 1 A102D PCI w/ on board echo cancelation - $1050

Hello, Several people asked to get a hold of the stats I used to determine that the Sangoma T1/E1 boards performed better in our real-world tests than the Digium boards. We've decided to post our results after confirming them over the past month of operations. Here is a link to the last two reviews I wrote about Sangoma with Asterisk:

Hi List, Just a little question about a notice from asterisk I don't understand: Here is what I have as soon as I place a call on a E1 line with an a104D Sangoma Card ( asterisk 1.2.9.1 ) : Jun 26 18:57:24 NOTICE[16489] channel.c: Don't know what to do with control frame 15 Does Anyone has a clue of how to get rid of that ? May it's because I use the HDLC decoding in hardware ?

Hello, I've recently bought a new Sangoma A104d PCI-card. WANPIPE release is 3.4.7. Machine is a dual Xeon with Debian 5.0.3. Asterisk is 1.6.11 with recent libpri and dahdi. When I boot the machine (including hardware and wanpipe and dahdi drivers) and start asterisk, everthing runs fine for almost 5 minutes. Then every few seconds HDLC errors occour. I also tried booting - and starting

Hi All, as good? I am trying to make a call for the Unicall channels and after the exchange of signalling and sending of the digits asterisk locks up with the sending of the signalling "E" and the TELCO says that asterisk would have to send signalling "F", as to make for asterisk to send signalling "F"? The TELCO says that the signalling "E" is

Hi all, We are running Asterisk 1.2.7.1 on our Dell Poweredge 2850 and are having massive sound quality issues. We are experiencing call quality issues for our remote location, namely calls cutting out and breaking up for our agents. The two main issues seem to be 'popping' and 'dropping' - popping would be pops and crackles on the line, where dropping would be complete audio

Hi, I am trying to setup a GSM-Card for Asterisk. I currently use a "vgsm I" from voismart (http://www.voismart.it/) but the driver is very bad (compile-problems and no echo cancellation). Is there anybody out there who can recommend me another piece of hardware (pci card)? I need 1 or better 4 gsm-ports. Should be stable and have an echo cancelltaion feature. And of course it

Hello List! I wanted to share to everyone the following compatible connectivity products that my company installed in our Asterisk based soft switch. I already sent these to the Asterisk.org site many days ago but for some reason they still have to post it. 1. Sangoma A101 single port E1/T1/PRI Card 2. Sangoma A102 dual port E1/T1/PRI Card 3. Sangoma A104 quad port E1/T1/PRI Card 4. Sangoma