similar to: T.38 Digium Fax Driver Success on Fail

Hello! I have a 64 bit Asterisk system and am wondering how to use Digium's 32 bit fax driver. Is there some kind of emulation that can be used? Thanks! Elliot -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090604/b7f1d6c4/attachment.htm

Hello! What kind of sms text messaging capabilities does Asterisk have? I do not know very much about about SMS technology, but I am looking for the following features: 1. mobile SIP devices can send and receive SMS messages 2. Asterisk server be able to accept and send SMS messages through PRI lines and Internet connections. I noticed that Asterisk has an SMS function, but I am not farmiliar

Hello! I have a sip device that is sending in the SDP: rtpmap:98 g729a It does not seem like Asterisk is negotiating the codec properly, because while the call rings, the rtp lines fail. However, on other sip devices that have "rtpmap:18 g729" in their SDP, things work fine with Digium's commercial g729 license. How do I get "98 g729a" recognized by Asterisk? Thanks,

Hello! I am having an odd problem in that when the caller dials extension "2" in a dialplan, the system waits 3 to 4 seconds before proceeding. This doesn't happen when any other other extensions are dialed, including an identical dialplan on other another extension! Is this a bug? Later, Elliot

Hello Everybody! I am currently setting up an Asterisk server for medium to high load (approximately 20-35 concurrent phone lines). Do you think the following specs will sufficiently satisfy this system? CPU: XeonQC3220 2.4GHZ 8M RAM: 2X2GB/800 Harddrive: 1X250GB I could add harddrives and partition them into /var and /log directories to help with diskdrive throughput. Thanks! Elliot

Hello! I am trying to configure my digium TE220 dual-span pci express card with Dahdi. I seemed to have managed to set up the card with the Dahdi kernel, as demonstrated by executing dahdi_scan: [1] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE220 (4th Gen) location=Board ID Switch 0 basechan=1 totchans=31 irq=16

Hello Everyone! According to voip-info.org the correcy syntax for the realtime function is: REALTIME(family|fieldmatch[|value[|delim1[|delim2]]]) on read REALTIME(family|fieldmatch|value|field) on write It seems from the syntax that it is only possible to retrieve a full row according to the value of only of column. This translates in SQL language as Select * from family where fieldmath =

Hello, I have a Google Voice phone number and want to connect it to my asterisk box to have calls handled to my SIP account. When I call the number I receive the correct INCOMING request on Jabber portion of asterisk, but the call is not connected to the gtalk part. JABBER: asterisk INCOMING: <iq from="+ 17174695631 at voice.google.com/srvres-MTAuMTc2LjEwOC4xNjo5ODQ4" to="

Hello! I have a few sip devices and it is necessary for me to disable call-waiting and immediately return a busy signal if the sip's channel is busy on them. What is the procedure to do so in Asterisk 1.4? Thank you, Elliot -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I am wondering how to send a call to a specific IP address that is different than the host of the URI. For example, an invite to the URI is " john at phone.com" needs to be sent to the IP address 123.456.789.255, not to the IP address of phone.com. How is this done? Thanks, Elliot -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello! I am wondering how the differences between G729, G729a, and G729b effect call bridging and server interoperability. For example, can one server use the G729 code with another server that uses the G729A codec? Also, which version is Asterisk set up to use? Thanks! Elliot

Hello! I remember a while back I saw a way to answer a call from a device that is not from the one ringing, but I don't remember what how to do it. Any help would be great! Thanks, Elliot

Hello, Is SS7 and PRI in any way compatible in that if the interface is configured one it will work for the other (granted, it will not have any of the ISUP, etc. parameters available if the line is PRI) or are they two distince protocols that have incompatible signalling? Thanks, Elliot

Hello! I am wondering how to configure Asterisk and devices so I can use different codecs for upstream and downstream packets. Thank you, Elliot

Hello! I have a very simple bash script: #!/bin/bash asterisk -rx "sip show peers" > /var/log/devices When I run it in bash shell, everything works fine, but if I background it (by adding & or using bg), nothing appears in the /var/log/devices file. Any reason for this behavior or help would be great! Thanks, Elliot

Hello, There are some parameters in the ISUP data (coming into the network via SIP-T packets) that need to be translated into SIP headers to be used by asterisk for proper call routing. What gateways are available to accomplish this? Thanks, Elliot -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm putting together a fax solution for my company that utilizes T.38. I wanted to throw out my plan and get some feedback if anyone is doing something similar or sees a blatant problem with it. We're currently rolling out SPA-942 phones for the standard desk phone with vanilla Asterisk 1.4.15 (just upgraded it today) on the back end. Most calls for satellite offices are handled by

what method is preferred: haylafax and Iaxmodem or spnadsp for faxing. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071228/e829632a/attachment.htm

Hi, I'm not sure this is a bug, so I thought I'd bounce it off the help group first. I had a dataset which I was subsetting, and occasionally I get an empty subset. If I don't check for emptiness and go straight to a which.min call on the subset, the program gets a big negative number back. One-line Example: > which.max(NULL) [1] -2147483647 This caused an indexing

I'm attempting to update to R 2.15.1, and I'm having trouble with a package that depends on the "Matrix" package. I've created a dummy package consisting only of a DESCRIPTION file that specifies the dependence on "Matrix", a NAMESPACE file, and an R directory, containing a single function, "square <- function(x) { return (x*x) }". When I try to