similar to: Benefit of PRI vs SIP trunk calls

I have a PRI line and I am having problems setting the ringtimeout on the dial application to more than 29. If I set ringtimeout to 29 on the dial application call and I do not answer the ringing phone then I correctly get DIALSTATUS set to NOANSWER. If I set ringtimeout to any value over 29 on the dial application call and I do not answer the ringing phone then I go to extension h and have

[2009-05-27 02:06:16.294] WARNING[6971] chan_dahdi.c: No D-channels available! Using Primary channel 24 as D-channel anyway! [2009-05-27 02:06:16.295] VERBOSE[6971] logger.c: [2009-05-27 02:06:16.295] == Primary D-Channel on span 1 up [2009-05-27 02:06:16.301] ERROR[6971] chan_dahdi.c: !! Got a UA, but i'm in state 7 I noticed the above error many days after this at around 2AM. This

Jim, and all: Thanks for the response. If I can repeat what you are saying: you don't have to define the multiple lines in sip.conf? For comparison, with my current esi setup, we have 10 outgoing lines. If one line is busy, then the service just rolls to the next number. This is set up with the phone service. That doesn't have to done with outgoing sip lines? Does the dialstatus

Is there a way to inject sound from a sound file into an established call using AMI? I have an established call from which I can record either or both legs. I can additionally "spy" on the call. Is there any way I can play a sound file into the call and not loose the ability for the people to continue talking while listening to the sound file? -- Jim Dickenson mailto:dickenson at

We have a client that currently has a Microsoft Lync setup. I must admit I know nothing about this setup. What we would like to be able to do is allow the phones on desks connected to this server the ability to dial something that would allow the phone to access an asterisk box to be able to do an agent login over their LAN. Is there any way to do this? Can the Lync server have a SIP trunk to

I have an i686 cpu and when compiling from source I get this error: touch /usr/src/dahdi-linux-2.2.0/drivers/dahdi/xpp/init_fxo_modes.verified Building modules, stage 2. MODPOST WARNING: could not find /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32. o.cmd for /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o Anyone else seeing this?

I am trying to get updateconfig working. I found an example of updating configuration files here: http://www.voip-info.org/wiki/index.php?page=Asterisk+Manager+API+Action+Upd ateConfig When I tried it the conf file was updated but the new entry was not added. action:updateconfig reload:no srcfilename:manager.conf dstfilename:manager.conf Action-000000:append Cat-000000:newuser

I am still trying to figure out a reasonable way to exit the chanspy application in a dialplan. For the most part I understand how things are working and there is one change I would like to propose. The way the 1.4.23.1 code seems to work is that if there are no channels that match the chanprefix argument the chanspy code stays in a loop waiting for a new channel to come into being that matches

I have a dialplan that looks like this: [dorecord] exten => _*99XX,1,Verbose(2,Doing custom record) exten => _*99XX,n,Answer() exten => _*99XX,n,Verbose(2,Doing custom record - before wait) exten => _*99XX,n,Wait(0.5) exten => _*99XX,n,Verbose(2,Doing custom record - before record) exten => _*99XX,n,Record(/tmp/prompt${EXTEN:3}.gsm) exten => _*99XX,n,Verbose(2,Doing custom

I have this extension: exten => 1322,1,Answer() exten => 1322,n,Set(CfMC_AMDValue="NotChecked") exten => 1322,n,GotoIf($["${CfMC_DoAMD}" != "Yes"]?NOAMD) exten => 1322,n,AMD() exten => 1322,n,Set(CfMC_AMDValue = ${AMDSTATUS}) exten => 1322,n(NOAMD),Wait(1) exten => 1322,n,UserEvent(E1322-1,${CfMC_ActionID}=${CHANNEL} & ${CfMC_AgentToUse}

I have a system that I am trying to get a port on a Sangoma A104d card connected to an Adtran 850 with 5 FXS modules and 1 FXO module. A problem I am having is figuring out what cable should be used from the port on the Sangoma to the JP2 port on the Adtran. Tried was a cross-over T1 (1->4, 2->5, 4->1, 5->2) as well as a straight T1 (1->1, 2->2, 4->4, 5->5). Neither one

Hi, I have been looking at Asterisk SCF http://www.asterisk.org/asterisk/scf, but its not yet production ready. Can someone please pitch in about HA feature in Asterisk ? (HA -> High Availability.) Also, What would be the pros and cons of using AsteriskNow over Asterisk ? Are the versions same in Asterisk and AsteriskNow ? We have been evaluating Asterisk for our Voice Application and it seems

I have been fighting with the ability to set the caller ID when I make outbound calls via a PRI line as well as via my SIP provider. The more I play around the less I understand. There is a setting in chan_dahdi.conf that seems to say do not pay attention to the CALLERPRES value and just allow the ID to be set. This setting is usecallingpres. If this is set to yes then the value of CALLERPRES

Hi ! We curently have a centos 5 / asterisk 1.4 server that we have some DTMF problems with. It has a Sangoma A104d card and only port one is used to connect to the PSTN. Port 2 is conencted via a cross-over cable to a RAS for modem access and port 3 is connected for data communication via PPP. Now, I want to freshen this setup to something newer. So I installed a Scientific Linux 6 server,

I installed version 1.6.0.3-rc1 and my AMI application stopped working. I reinstalled 1.6.0.1 and it worked again. I reinstalled 1.6.0.3-rc1 and it stopped. Looks like a problem in the software to me. Following the same steps using the same code for the AMI and conf files for * I get bad behavior in 1.6.0.3-rc1 and good behavior in 1.6.0.1. I have this action: Action: Originate Channel:

I sent a question yesterday about having problems setting the caller ID. I turned on pri debug for both a good and bad call and I see this in the good call [2010-03-05 05:58:20.743] > [6c 0c 21 80 30 30 30 30 30 30 30 30 30 30] [2010-03-05 05:58:20.744] > Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) [2010-03-05

Hi, I'm having alot of trouble understanding how to use dialplans for outgoing calls on Dahdi. Context : I have 3 TI spans, so 69 voice channels and three D channels (24,48,72). This is on a TE420B from Digium, if it matters. Here are my (apparently simple) questions in no particular order: 1) Dial(DAHDI/5555555555|20) doesn't work. But Dial(DAHDI/42/5555555555|20) does

In one of my center , its not taking root password. Anyways to recover it ? In other terms , I lost the control of server. Any solution or re-installation is the only way left ? I am using CentOS. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090122/ef95ad6e/attachment.htm

Hi All, pl help me with this basic question. I have a users (soft clients) with usernames having Alphabetics. I want to use Asterisk as my server. How should I have the dial plans as there are no numbers involved . so How can I make the configuration to work ( with numbers I can get this done using extensions.conf) my expected result is : alice at pbx.com should be able to call bob at

Dear all, Anyone of you knows how to play an audio file at the beginning of a call for both Caller and Callee? A(x) of Dial application only plays audio for callee. I don't want to use MeetMe because I want to use Monitor and MixMonitor. Thank you! ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra pol?tica de env?o y recepci?n