similar to: 1.8 MIBs

Asterisk 1.6 behind a firewall and NAT. We are terminating multiple DID calls, originating and transferring. A provider offers both SIP and IAX trunking. Cateris paribus, what is the preferred solution to choose? What points to consider? I can name the provider if this is not against this list policy--is it? Thanks, -kkm

I have a private trunk with a peer. A call comes in from the trunk, and Asterisk calls a peer agent. If the agent transfers the call (this is a blind transfer using REFER), I want Asterisk to send a REFER back to the trunk, and essentially stay out of the loop. As set up, Asterisk initiates a new call using INVITE to the trunk and then bridges the original incoming and the new outgoing calls.

On June 11, 2017 8:58:11 AM GMT+02:00, Manuel Wolfshant <wolfy at nobugconsulting.ro> wrote: >On 10 June 2017 23:26:47 EEST, Tim Dawson <tadawson at tpcsvc.com> wrote: >>Build from source, and done . . . wasting your time looking for a less >>out of date RPM is pointless. . . RPM, .deb, etc are almost always >>downrev. . . >> >>- Tim >>

Build from source, and done . . . wasting your time looking for a less out of date RPM is pointless. . . RPM, .deb, etc are almost always downrev. . . - Tim On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote: >Hey all, > > I recently got an RMCARD205 for my Cyber UPS.... > >if I use no MIBS line in the config file, I get this: > > >> Network

https://bugzilla.mindrot.org/show_bug.cgi?id=2246 Bug ID: 2246 Summary: PAM enhancements for OpenSSH server Product: Portable OpenSSH Version: 6.6p1 Hardware: Sparc OS: Solaris Status: NEW Severity: enhancement Priority: P5 Component: PAM support Assignee: unassigned-bugs at

Hi, This appears to be related to a thread from January 2010: http://lists.alioth.debian.org/pipermail/nut-upsdev/2010-January/004470.html NB: This is on an HP-UX 11.31 box, using a self compiled and packaged version of NUT 2.6.3, and net-snmp v5.7.1. Therefore some of the search paths and things like that may well be wrong because I've done something dumb. I'm also only just getting

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

Hey all, I recently got an RMCARD205 for my Cyber UPS.... if I use no MIBS line in the config file, I get this: > Network UPS Tools - UPS driver controller 2.6.5 > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'! > Please report it to NUT developers, with an 'upsc' output for your device. >

On 10 June 2017 23:26:47 EEST, Tim Dawson <tadawson at tpcsvc.com> wrote: >Build from source, and done . . . wasting your time looking for a less >out of date RPM is pointless. . . RPM, .deb, etc are almost always >downrev. . . > >- Tim > >On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote: >>Hey all, >> >> I recently got an

Hi, Looking at some udp stuff on snv_57, and I noticed that mib:::udpInDatagrams no longer exists, has this been superceded by mib:::udpHCInDatagrams? From my understanding they represent the same counter, but I''m asking in case this is a bug. I noticed that there is still a reference to udpInDatagrams in the DTrace testsuite. - Fintan

hi, i have trouble with snmp mib, atemp configured the snmp-ups, but it doesn't work , after the command /lib/nut/snmp-ups -DDDDDD -a katodo -x mibs=mge , the message say "0.006471 Unknown mibs value:". My snmp board is a cp504 netagent , may be someone can help me? what mib i must use? sld2 -------------- next part -------------- An HTML attachment was scrubbed... URL:

G'day I'm currently using NUT on Debian squeeze box in the same subnet with an IBM 3000 HV (branded Eaton 5125 with Web/SNMP card), now I wanted to get our storage appliance running NexentaStor 3.1 set up to be using NUT too. Nexenta- Stor is an OpenSolaris / illumos-based appliance OS currently using NUT packages from ubuntu hardy. My question here is whether I'm running into a -

I have attempted to create cpqpowermib.h for the snmp-ups driver. We use HP UPSs and version 2 of the firmware for their AF401A management cards use the CPQPOWER-MIB. I have attached my current attempt (which builds and almost works against nut 2.4.1). Once all is working I'll send in the finished article for consideration. This file is based on ietfmib.h. There are a couple of issues

Thanks for the quick response Charles! I may not have gotten the correct output from the snmpwalk, let me know if the attachment is usable. Thanks! New data added, here is the gdb output: Reading symbols from /usr/bin/snmp-ups...(no debugging symbols found)...done. (gdb) run -a tripplite -DD Starting program: /usr/bin/snmp-ups -a tripplite -DD warning: Could not load shared library symbols for

Hi all, Not sure if this is on topic or not. I'm trying to query an SNMP value from centos 6 and I get a bad response if I don't specify the MIB to use: 0 digimer at pulsar:~/anvil/striker$ snmpget -v2c -c public -m /home/digimer/Downloads/APC/AP7900/MIB/powernet421.mib 10.255.2.1 .1.3.6.1.2.1.2.2.1.6.2 RFC1213-MIB::ifPhysAddress.2 = Hex-STRING: 00 C0 B7 5F 8A 85 0 digimer at

Sorry, I just now figured out how to get a usable output. -Option one doesn't work at all for me. snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h Creating /usr/share/snmp/mibs/ups-mib.txt-mib.c Done. -Option 2 is attached. I ran the following to get the output. snmpwalk

Hi all. I am having an issue and quite frankly would rather not spend the entire next two days learning the entire snmp program. I am hoping someone out there has used MRTG and SNMP to make it work. I have both installed. Single server, polling itself. Question 1- does snmpd have to run as a daemon, or only run once so I can get OID and MIBs from it? Question 2- does anyone know the command

2014-02-26 1:45 GMT+01:00 Jason R Begley <jayray at digitalgoat.com>: > Sorry, I just now figured out how to get a usable output. > -Option one doesn't work at all for me. > > snmp_build: unknown failuresnmpget: Error building ASN.1 representation > (Can't build OID for variable) > COUNT = 0 / 0 > Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h > Creating

This mib used to work, so is there a way to go back to the version prior to this one without downgrading the whole package? * Starting UPS drivers... Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Generic SNMP UPS driver 0.44 (2.4.1) Detected GXT2-2000RT120 on host upswallleft (mib: ietf 1.3) [upswallleft] nut_snmp_get: 1.3.6.1.2.1.33.1.4.4.1.4.0: Error in

On 10/31/2017 01:13 AM, Jim Klimov wrote: > If the new data is in a separate OID tree, it can quite be a new MIB. Otherwise you can use the UNIQUE flag and set the preferred (e.g. newer, more precise) source for a value first in the list of same-named mappings in existing file - if there's a hit on an actual device, it will be used and not iterated onwards. The flag is not yet supported for