similar to: load balance with 2 wan connections

Hi, Is FAXing with Asterisk a practical option ? Or is it better just to use a plain fax connected to an FXS and just switch with Asterisk. I specifically wanted to know if there was any experience using just the fax scanner to send faxes and receive them via asterisk and the to e-mail. My idea was to take my old fax connect it to an FXS port and send faxes with the fax machine (using the fax

Hello, Asterisk 1.4.26.2, FreeBSD 8.0-RELEASE We have a very simple setup, using SIP softphones and a simple diaplan as follows in the examples below. When I dial the 700 extension it asks me for the extension and password, and it always says "login incorrect". The mail system send the email ok and Ekiga shows that I have vaoicemail, so the only thing that is failing is the actual

Hello! Ater several successful SRTP-enabled calls with SRTP set to Mandatory, asterisk starts to give the following warnings in Log: WARNING[13714] res_srtp.c: SRTP unprotect: authentication failure (continiously) and client hears no sound. After i restart the client program it works fine again for a while. Then the same warning again. Asterisk 1.8.1.1, RealTime engine, sip peer has

This has come up before on the list and archives but I don't seem to find a solution for this. On just a few nodes we have this situation where we see the IP disappear from the CLI iax2 show peers list but the status shows OK: 3012/3012 (Unspecified) (D) 255.255.255.255 0 OK (89 ms) How can the status be OK a few milliseconds ago and have no IP ?? The strange thing is

Hi All, I have a customer that I need to give access to one of our servers over a WAN. Their box is running some windows server version and they use terminal services to let their employees access their applications. We use Samba in or local office environment where it works quite well. I need to know the following: 1) Will Samba work over the internet? 2) Can Samba connections be encrypted or

Hello, I have a Sip phone (Siemens C470IP) which works perfectly with different VoIP providers (iptel, betamax, ovh...). It also worked well with my testing server (ubuntu and inside the LAN). But now the problem i have is that the hardphone doesn't connect to my dedicated server (debian lenny / Asterisk 1.6.2.13). The strange thing is that ekiga can connect to the same asterisk server with

You need to ensure that traffic to the SIP box is sent to the correct IP. Also if you use split-tunnel (eg: not redirect-gateway def1) you must make sure NAT and traffic redirection works as is so the Asus router knows it should send the traffic through tunnel and not via WAN. IMPORTANT: Then you must, in the ASUS RT-N66U make a port forward inwards from TUN to the phone client. I would suggest

talks about "others" having 2-3% of this market share. In a rough calculation that is 165 thousand units for the other in 2009 alone. Say that Digium has 3% of the Other market share that's about 5K units for Digium alone in 2009. The article also estimates that OSS provides comprise about 10% of the overall Others share so that alone is 16.5 (this would include the 5K digium Units).

Hello folks, I hope somebody here can help shed light on this peculiar behaviour of smbclient. When we execute: smbclient -L <host> and the host is across a VPN link traversing a WAN (DSL) link we get the following: 1. <host> is Windows 98SE: OK, smbclient completes 2. <host> is Windows XP or Samba 3.x: smbclient is able to retrieve the share list but hangs trying to get

Hello All I have looking for any specific answer for one thing. I have a virtualized Server with only one physical interface eth0 (WAN). To run OpenVPN i need to use DHCP server. And here is the question: is there a chance to run DHCP server on eth0:0 interface? Or it is impossible ? Thanks in advance. -- /Best Regards *Greg*/ UML Professional (Cert #251574932)

Hi! I''m trying to create a routed VPN using OpenVPN - and having trouble with the routing concepts involved. Let me see if I can properly describe my current topology: Server - LAN, with both local workstations and remote bridged workstations on the 192.168.0.0/24 network (this works without reservation). Server located at 192.168.0.71, 192.168.0.72, 192.168.0.222, and few

Yesterday a customer was attacked from the following IP addresses so add them to your blacklist: iptables -A INPUT -s 37.8.119.75 -j DROP iptables -A INPUT -s 37.8.22.240 -j DROP -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext 2001 -------------- next part -------------- A non-text attachment was scrubbed... Name: not

Perhaps someone with a sharper brain than I can solve this little mystery. I've Googled until I'm blue in the face, read all TFM's I can find, and tried several iptables rule combinations but just can't get the following to work. Here's my challenge: I have a CentOS-5.3 "main" server with a static public IP address running Apache, OpenVPN, and a bunch of other

Hi, I'm trying to integrate Skype and Asterisk but I'm only interested in these 2 things: 1) allow any Asterisk SIP extension to call any Skype "user". I do not need to call landlines via Skype. 2) allow Internet Skype "users" to call my Asterisk PBX Skype "user" and route the call to a specific Asterisk SIP extension. At first, I thought it would be

We have a client that wants to bond 2 DSL circuits instead of getting a T-1 (or similar) at their office to run their VoIP traffic on. We came across this Multihomed Gateway (MH200): http://www.cyberpathinc.com/mh200/details.htm Does anybody think this would work if installed at the client location handling NAT for 10 Cisco 7960's and connecting to our public asterisk server? My concern

> On Thursday 05 Feb 2015, jg wrote: >> Calling from ServerB to ServerA works, but not vice versa. The only odd >> thing that appears to me is the different perceived port on ServerA. >> >> Does someone have an idea at what to look in detail? > > Look in /etc/asterisk/iax.conf in the first instance. > Basically I used the example from the Asterisk book

Hi, I am trying to connect two Asterisk servers using IAX2. Everything works fine when I couple them within a LAN segment, but not when I connect them using WAN connections. I made sure that the routers' ports are mapped properly and checked this with additional ssh rules. ServerA is a Raspberry box with the vendor's Asterisk version 1.8.13.1 and ServerB is normal CentOS 7 box with

On Thursday 05 Feb 2015, jg wrote: > Calling from ServerB to ServerA works, but not vice versa. The only odd > thing that appears to me is the different perceived port on ServerA. > > ServerA*CLI> iax2 show registry > Host dnsmgr Username Perceived Refresh State > 80.152.xxx.xxx:4569 N ServerA 79.233.yyy.yyy:45697 60 > Registered

hii guys i have some issue with dns in samba 4 i have install and setup 2 samba dc in different Site site2 dc joint to site1 dc, with internal dns topology : site1 --- openvpn server --- firewall --- wan --- openvpn client --- site2 192.168.1.0/24 192.168.2.0/24 in site1 i have some application let say email server: mail.local.lan > 192.168.1.2 web server : web.local.lan > 192.168.1.3

Is anybody using Asterisk with a dual WAN router (Xincom XC-DPG602, Hawking H2WR54G, Fortinet FortiGate-60, SonicWall etc) ? -- #Joseph