similar to: Cisco IP Phones and AVAYA IP Phones: Provisioning the profile

Hi All; How to configure the buttons in the Cisco IP Phones to be used for different functionalities like "Call Forward, Call Pickup, ... etc"? For example, if I need to assign one of the buttons existed at Cisco IP Phone to be used for CallFrw, how to do this in Asterisk? Regards Bilal

Hello; I need to use Cisco IP Phones with Asterisk and I have some questions to know how to use it if someone can advise: 1) How I can assign for each button an extension? 2) How I can assign for specific button a feature to be used (like call forward or call pickup .. etc)? 3) As you know that it is required to have a correct username and password to login, so where to give the username and

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination

Hi All; Can anyone advise if using Cisco IP Phones in skinny protocol is fine or not? Or it is better to use it in SIP protocol? Regards Bilal

Hi List; Can someone advise me which IP Phone model that has buttons that can be assigned to do specific functionalities (call pickup, call formward, call appearance) and a transfer button and hold button? Which is the best of the following (that has buttons can be assigned to specific functions): Cisco 7970 or 7960 Polycom 501 Grandsream IP Phone Budge Tone 1001 or 1002 Linksys SPA 942 or 922

Hi All; Is there a softphone that can be installed on a mobile (new mobile models), so it can work with Asterisk as following: 1) As SIP or H323 client, with the ability to add button functionalities (call pickup, call transfer, ...) so if there is a wireless network, then it can use it to connect to Asterisk and work as client, but from the Mobile. 2) If there is no wireless network, then it

Hi List; Asterisk does not have any kind of cards that can work with it to be used with Digital Phones (digital phones differ than analoge phone and differ than IP Phones). Anyone can advise about this as I did not find this on Diguim Regards Bilal Ghayad __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around

I am talking about the SIP. Now the new mobiles (Nokia, Erecson, Panasonic, iPot, ... etc) all of them support SIP capability. They are able to register to any SIP server (by giving the IP address, username and password). Fring is one of the software that can be installed on the mobile devices and can register on the SIP servers. BUT, the new mobiles currently come with built in SIP (no need to

Hi All; Any one used Digium IP Phones D40? I need to know if they are stable with good voice quality? Comparing to Polycom 330, which is better? Let us talk frankly although I know that we have to support Digium. Regards Bilal

Hi All; Anyone knows an IAX IP Phone works fine and tested? Does polycom support IAX IP Phone? Regards Bilal

Hi List; How can one Asterisk Box A to send a SIP call for another Asterisk Box B, and that call to be authorized based on the username and password, and not on the IP (as the IP address of the source is not known because it keep changing)? I think the trick in the Dial command, how to write it properly in a way that other Asterisk Box can recognize the sip username and password which are existed

Hi All; Any one can suggest a TFTP server to be installed in Fedora (same machine that Asterisk is installed) to be used for Cisco IP Phones to download the required firmware and configuration files. Thanks for the help in advance. Regards Bilal

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Dears; To patch libpri: I just place the patch file in the libpri source directory and then I run make and make install? Or I need to compile the dahdi and asterisk also? If the problem stayed, do I have to go for previous libpri version? Or for previous dahdi version and asterisk version? Regards Bilal ----------- > bilal ghayyad wrote: > > But I am afraid it is a bug because I

Hi Danny; Really I did not understand how I can determine if the IO will be DB or conf files? Is it from the Asterisk manager? Regards Bilal ------------------------- It depends on how you are configured. The gui interfaces using Asterisk Manager, so you get the Same IO from the gui that you would get from a native manager session. -----Original Message----- From: asterisk-users-bounces at

Hi All; Till now I am not able to find a good IAX IP Phone or Gateway that can be used with good quality. Anyone can advise for good one? Regards Bilal ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.

Dear List; I am trying to create a link between Asterisk and My softswitch, the link to be SIP Trunk. I did the below configuration and I do not know if any one can help me and advise me to have better configuration to be sure that link is fine. But I do not know how to determine the SIP username to be sent for my softswitch as sometimes the softswitch need to check it. Also, does asterisk

Hi all, Has anyone put * in between an Avaya and Cisco system to connect two offices together? I was thinking about adding a SIP trunk on each side and getting Asterisk to pass calls between them. There is a leased line for bandwidth. Any tips/ideas on whether this is possible or dumb? Thanks.

Dear; Thanks a lot for guiding me. Is it possible that the installation libpri-1.4.11.5 newer than the libpri-1.4.11.5-patch? Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for the libpri-1.4.11.5): libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch It gave me that patched detected as shown below (example of one file, and I got same for other files): patching file