similar to: Maximum E1 Ports on Asterisk ?

Hi All, Is it possible to use Quintum AFT800 on Asterisk 1.4.29 as Trunk for Analog (like Digium Analog Card) ? And if it's possible, could any one please give me the reference how to configure it on Asterisk 1.4.29. Thanks Regards, Zoel Hairi -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I've configured a new Asterisk 1.6.1 box to replace an old Bristuffed 1.2 Asterisk. Since then, it happens that forwarded calls are not presented the way they used to be. It seems that now, some endpoints are displaying the original caller id (that's what I'm trying to achive), while some are displaying the redirecting number : so if A calls B, B forwards to C depending on where

Hi all, I am handed a project to setup *. The requirement is that it can handle 8 T1s. Half of the calls coming into the system will be routed to SIP extensions (with transcoding). The machine we have in our disposal is a new dual Xeon 3.2gHz server with 2g of ram and an dual 1000mb nic. Voice will be coming in from the PSTN (through 2 quad digium cards) in g711ulaw, and most of the time will

Is there any technical difference between a T1 cable and a cat5e patch cable as far as using them with Digium T1/E1 cards? Can PRI circuits terminating at a smart jack connect successfully to Digium cards using straight through CAT5e cables? If so, are they using all of the pins in the cable? Thanks in advance

Hello list, (Resending this email due to a typo in previous copy) I need to do E1 to T1 conversion for a project, and was wondering if there exists a card with both E1 and T1 on it. Or is it possible to use two separate cards in an asterisk box, one for E1 and one for T1? (Please don't mention aculab or adtran, dealt with them in the past, won't deal again.) I talked to Digium and the

Hello, I am missing any description of zaptel/DAHDI alarms. The TE200 series user manual contains only a description of LEDs states. These alarms states are visible in zttool/dahditool or in astersick CLI (zap show status) and I wonder what is the real meaning of these alarms for E1 channel. Possible alarm states (based on zaptel.h 1.2): 1. No alarms 2. Recovering from alarm 3. In loopback

Hello all, We are looking for some hardware requirements/recommendations to be able to handle a full DS3's worth of TDM -> VoIP traffic. The DS3 would bring 24 calls per T1 x 28 T1s = 672 simultaneous calls. We would then need to convert those calls into G729 SIP VoIP calls to send to our asterisk box over ethernet. Since everything is going in/out of asterisk is 729, and no features

Dear, I have two Asterisk PBXs with an E1 interface/RJ-45 port in both boxes. I need to connect both PBXs with E1/R2 and UTP cable. What are the requirements to deploy the UTP cable ??? Straight-through or crossover ??? What are the pinouts in both peers ??? Thanks a lot, Alejandro

Has anyone here used T1s with RBS with asterisk? Cary Fitch

Hello, We just had some new T1s turned up today to replace others that our contract has run out on and we are now getting more echo on the new T1 lines than we had on the old ones. The T1 type is 24-channel, D4/AMI SF Robbed-bit(the same as the T1s they replaced) The problem is that we are getting echo on about 10% of the calls in and out placed on these new T1s compared to less than 1% with

Hello everyone, What do you think about having localized the following CentOS components: - Rolling notes in CentOS installer. These images are shown during the installation process, once the configuration is done and you are waiting for packages to be installed. Rolling notes are a great place to promote CentOS. If they are not localized, they are shown in English language by default.

Hi Timothy, On Thu, 2019-05-23 at 14:03 +1000, Timothy Lee wrote: > I can provide zh-CN, zh-HK and zh-TW translations of the content. That's awesome! The files you need to edit are the following: - Rolling notes of CentOS installer https://git.centos.org/centos/Artwork/blob/c8/f/rnotes/PO/zh-CN.po https://git.centos.org/centos/Artwork/blob/c8/f/rnotes/PO/zh-HK.po

Hi admin, Now I start editing the page of CentOS wiki in Simplified Chinese and I found everypage created by Timothy is in such way: wiki.CentOS.org/zh/xxxx Now I want to say is that zh-cn is the best,even if you ask me the reason i cannot give you a nice answer. These days I'm just doing translation work in Fedora Project and they use zh-cn code,of course many other projects are in this

Hi all- This question is for those familiar with EuroISDN setup. I have a customer in Europe where I'm going to install an asterisk based system with 4 E1's. The customer will configure them all in one large hunt group. My question is about the E1 channel configuration. I know that usually single E1 spans are set up with 30 channels (1-15 and 17-31) as the voice (bearer) channels and

On Wed, Jan 2, 2019 at 1:29 PM Alan Bartlett <ajb at elrepo.org> wrote: > > On Wed, 2 Jan 2019 at 21:21, Timothy Lee <timothy.ty.lee at gmail.com> wrote: > > > > Hi all, > > > > I've made a minor change (changed one CJK character) on > > https://wiki.centos.org/zh-tw/SpecialInterestGroup and > >

Hi All, I met a problem using readLines function to return the data from Google maps. readLines(url(" http://ditu.google.cn/maps/geo?q=+qianshuichong,+guichi+anhui,+CN&output=csv&key=ABQIAAAAq8Fnd_oUka-7RdS6BrD7GBTqeABoQuNTXS36G_rkiwQnKRW6GBTkns8JpKz6y6dScgB8827dlddUlg"), n=1, warn=FALSE) [1] "200,4,30.6528380,117.4872250" The above code is ok because the

SamuelCheng Virtualization Translation(to Chinese) http://wiki.centos.org/HowTos/Virtualization/Introduction -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-docs/attachments/20090805/e7d37915/attachment-0004.html>

For each level of the factor in dotplot, I have time points I'd like to connect with a line. In the example below, 'x' represents a starting time and 'd' a duration, and I wish to connect 'x' to 'x+d'. Ordinarily I would use Dotplot from hmisc for this, but I have not been able to find a time class that Dotplot will allow. I can get lattice dotplot to put

I have a couple of live T1s sitting around and they are not ISDN(like most of the people that are using Asterisk seem to be using), they are regular old 24 channel, robbed-bit, E&M wink start, D4AMI T1 circuits. Can I get these T1s to work with a T100P Digium card and asterisk? Searching through the lists and the documentation I haven't seen any examples of how to configure this kind

Hi Timothy, On Thu, 2019-05-23 at 14:03 +1000, Timothy Lee wrote: > I can provide zh-CN, zh-HK and zh-TW translations of the content. Your changes were pushed. See: https://git.centos.org/centos/Artwork/c/9efa093b155293bf171d6b7f9ceeb73b41170cf9?branch=c8 To render Chinese rolling notes images I had to change the final images' typography from "Overpass" to "Google