similar to: Echo Cancellation Problem - Invalid Argument?!?

Hi List, I'm finding a solution to provide failover and load balancing features to my IVR system. Anyone suggest me what is the best solution please?. what the hardware I should use ?. I heard about RedFone, but someone on the mail list said that it is not good because TDMoE module in asterisk is not so stable and TDMoE is stale. And It seems that RedFone doesn't not support load

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm testing a telephone connected to FXS port of a Sangoma A200 card. But I'm observing that callerid is not working. The configuration that I'm using in chan_dahdi.conf is the following one: - --------------------------------------------------------------------- ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit

Hi all, I've done this a few times with other PBX's but swyx has stumped me! I'm having some trouble getting Asterisk connected to a Swyx system using a sangoma A104dx... currently the setup is: BT <-> Swyx The above setup works fine... what i'm trying to achieve is BT & SIP Trunks <-> Asterisk <-> Swyx I have connected to our BT (2 x ISDN30 UK) with

Trying to install wanpipe 3.5.18. No errors during compile. But when I reach the point where wanpipe and dahdi_cfg is started, I encountered an error. Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

Hi all, My problem boils down to these errors: ... Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) == Everyone is busy/congested at this time This is triggered by lines in extentions.conf such as: exten => _X.,1,Dial(ZAP/g1/${EXTEN},,W) The system is CentOS v5.2 with Asterisk 1.4.23 (druid-asterisk-1.4.23.1-2), a Sangoma A104

Hello, I have following problem with Sangoma A104 card: CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI

Hello my friends We are having seriously problems with our asterisk server, our versions are as follows: WANPIPE Release: 3.4.7 Asterisk 1.4.21.2 Zaptel Version: 1.4.11 libpri version: 1.4.10.2 The symptoms are very weird, the CLI stop working suddenly, a core show channels shows MANY channels FREEZED, the incoming and outgoing calls stop working, the internal calls stop working, in resume we

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But doing all this didn't start the PRI channels. It says

Hi, I'm using Sangoma's wanpipe together with dahdi, all software downloaded today at most recent version. Hardware is Sangoma A104, a 4xE1 card. Installation went well. Anyway, wanrouter status shows a different result than dahdi_tool or dahdi_scan. I've just put a hardware loop on port 1. All the other ports are open. wanrouter status shows the expected result: Device name |

I'm trying to send CallerID info to a MetaSwitch system over a PRI. The MetaSwitch gets the info exactly as it is sent by Asterisk, but I think it might be having trouble with the Hexadecimal b1 that is being sent just before the first character of the CallerID Name. Does anyone know what the significance is of the b1 being sent here? Or, is there a way to make Asterisk not send the b1

Hi there, we have a problem with dahdi and overlapdial. We are running an E1 in Germany and are in need of overlapdial. The E1 is connected to a Sangoma A101. As soon as overlapdial is set to "yes" we have problems with incoming audio on the dahdi channels. When set to "no" all audio is fine. Basically we can choose between being able to receive calls or to place calls

Hello to all, I have a problem with an asterisk qsig. I have three machines: Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk---> Asterisk I use Snom phones on Asterisk. If I call from Asterisk to Nortel, Nortel reminds me of the name of the person i'm calling and I visualize on the display of Snom phone, but if I call from Nortel to Asterisk, the QSIG does not send

Hey Guys! Please help me to find out issue. I have two PRI ## Span 1: WPT1/0 "wanpipe1 card 0" span=1,1,0,esf,b8zs bchan=1-23 hardhdlc=24 echocanceller=mg2,1-23 ## Span 2: WPT1/1 "wanpipe2 card 1" span=2,2,0,esf,b8zs bchan=25-47 hardhdlc=48 echocanceller=mg2,25-47 Sometime my calls got through but some time i am getting pri cause 44 sebpbx1*CLI> == Using SIP RTP

I have installed Asterisk on a CentOS4 box and then installed Asterisk from CVS. I installed a Sangoma A101 and connected it to a Adtran 600 using a T1 Crossover cable. The 600 has 12 x FXS, 12 x FXO interfaces. I ran through the wanpipe install instructions and configured it, now I can run [root@altpbx asterisk]# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info

Hi, I have a client that has a 24 channel voice T1 that I have been using e&m signalling over for a number of years. The local telco finally got an ISDN switch and wants to move them to PRI. I didn't see this as a big problem - I've done a few others on this particular Caribbean island without issues, but this would be the first time with a Xorcom unit involved. We tried to do

When I restart or reboot I can not dial out. The dial() incorrectly sees dahdi/1 as busy. I call in once from a cell phone, which is successful then I can call out with out issue. Any ideas would be much appreciated. Sangoma B600de asterisk-1.6.0.9 dahdi-linux-2.1.0.4 linux-2.6.28-gentoo-r5 wanpipe-3.3.16 ###chan_dahdi.conf ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit

hello i had configured a Dial plan in which i am using application time base i.e 1 - if? call comes to PSTN line??? from 8pm? evening till morning 8am the call should? automatically forward to guard exten i.e exten 211, and if guard dosent receive call in 30 secs message should be saved in voicemail. 2 - if call comes in working hours than it should be received by ext 112 n from there using

Hi ! We curently have a centos 5 / asterisk 1.4 server that we have some DTMF problems with. It has a Sangoma A104d card and only port one is used to connect to the PSTN. Port 2 is conencted via a cross-over cable to a RAS for modem access and port 3 is connected for data communication via PPP. Now, I want to freshen this setup to something newer. So I installed a Scientific Linux 6 server,

I am sure many of you have seen my post asking question that I cannot seem to resolve. While the responses i have been getting have been helpful i still cannot seem to get this working 100%. So I have waving the white flag here. I give up. I need someone to come to my office and help me get this working. If anyone is interested the office is in Lexington KY. If someone is interested we can