similar to: Issues with 1.8 and BlindTransfer

I have deployed several 1.8.3.2 systems as upgrades of customers systems and now I am seeing random crashes. For some reason the builds lock up and stop taking sip connections. Existing calls stay on but when the user hangs up no new calls or reg attempts work. In most cases a "core restart now" cleans things up. Some times I have to kill the asterisk process. The stability of 1.8.2

Hey all For some reason the mailing list is sending all messages from the sending party. This makes it less than ideal when responding; as selecting reply goes to the person and not the list. Can we have it set back to the old way please? Thanks Andrew for pointing this out to me. Bryant -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am testing out inbound faxing using res_fax and res_fax_spandsp.so My system answers the call but then sets there on the ReseiveFax line then comes back with an error that it exceeded the maximum retries. How would I go about debugging this? Below is my very simple dialplan code I am using, and the fax show version gives the following as well. FAX For Asterisk Components:

Hey all I have been beating on this all weekend long. Any feed back would be appreciated. We stood up a 11.6 system. We tested everything we could think of. We moved over to it and all seemed to be working good than a customer told us that they were not hearing our vociemail greetings. When we call into the system and it drops to voicemail we just get a beep no greeting played. We checked

Is there a way to limit the items returned by pjsip show [type] using like chan_sip allowed for sip show peers like xxxx, but I can't seem to figure out how to lookup or limit my returns with pjsip Thanks Bryant -------------- next part -------------- An HTML attachment was scrubbed... URL:

Is there a way to drop a ip connection to asterisk after a number of register attempts. I have been having issues with hackers doing registration scanning against our server. We block their address at the fire wall but since asterisk does not force a drop of the connect after so many bad reg attempts I can't enforce the block until they drop and try again. This allows them to run the box

I have the following senerio. Call file calls 1st party. When connected give called party option to connect to second party. Issue Dial to second party. Caller answers and the two are bridged together. My issue is that 4 out of 5 calls fail to bridge the audio. Am I missing something or is there some kind of bug? Here is my test dialplan ;Dialer Base Code Files. ;Variables

I did an upgrade to the SVN trunk on the 12/9 and when I looked in my mysql table for CDR's today there are no entries since the update. I have rebuilt and re-installed and re-started asterisk still no CDR's flowing to mysql. I did not change any configs. I checked to make sure that the cdr_mysql option was selected under the make menu options. The module shows it is there when I do a

I have a project that is requiring the use of MS SQL from asterisk. I get an error when the pjsip contact tries to update the contact table. [Oct 15 21:34:55] WARNING[3033]: res_odbc.c:649 ast_odbc_prepare_and_execute: SQL Execute returned an error -1: 22018: [FreeTDS][SQL Server]Conversion failed when converting the varchar value '3.000000' to data type int. (101) The datatype

We have written some monitoring and stat collection scripts that use asterisk -rx "command" The script runs once a min and logs data and posts any critical notifications. Everything is working well with this method but we get the -- Remote UNIX connection / disconnect message once a min and we would like to suppress it. Is it possible without reducing the verbose logging level.

The Cisco/Linksys SPA devices are also able to be provisioned automatically. On Wed, Apr 15, 2015 at 3:20 PM, Bryant Zimmerman <BryantZ at zktech.com> wrote: > Alejandro > > All of the Grandstream devices can be remote provisioned if you know what > you are doing. > > Bryant > > ------------------------------ > *From*: "Alejandro" <cdgraff at

Hi, I am using OpenSuse 12.2 64bit OS which uses Kernel 3.3.x version and downloaded Asterisk 1.8 current version, after installing Asterisk, while starting Asterisk it hangs at the stage of loading modules.conf, I checked the forum https://issues.asterisk.org/jira/browse/ASTERISK-19245 but still after updating through yast also i am facing the issue. Have anybody faced this type of issue with

We are having an issue where on the latest version of asterisk when configuration pjsip via realtime. we do a pjsip list endpoints it shows our endpoints but lists them as invalid. When we do the pjsip list endpoints again it shows no objects. This applies to pjsip list aors as well. We did not have this issue on our older asterisk 13 installs. My guess is something has changed

Hey all I am having instances where voicemail boxes will have a 00001 message and no 00000 message this causes the user to be told that they have a message that they can't get at. If I renumber the messages manually to start with the 00000 numbering then the user can get their messages. What could be causing this and how can I get it out of the system. Is there a patch I can apply to the

Does anyone have any examples of using realtime database driven call parking lots. I am on version 1.8.x My goal is to be able to do database driven multi-tenant parking lots with out adding sperate entries into Features.conf for each lot. I also need to be able to use the same parking extension pool for each tenant but sand box them into sperate lots. We have been able to do this for every

hi, We have a phone number from third party provider which is used for inbound calls. How could I monitor if this *phone number* is reachable? the initial idea doesn't sound elegant: - on my SIP server I set couple seconds of ringing before Answer(). - the monitoring server calls to that phone number for few seconds, checks if it "hears" the ringing and hangs up the call. ** I use

I want to add an entry to a database every time a brute force registration attempt is done. from this database we are updating cisco routers with our ban list so our entire network is protected. The database side of things is working and has been for some time. I really would like to add the file2ban side of it to protect our asterisk system better. How would I best go about doing this

Hello Everyone, Unlike going through DIDx, DIDLogic etc.., we have an option of getting DIDs directly from local telco Bell Canada. Currently our SIP Trunk provider assigned a DID to us, and as you know, they just redirect requests it to our PBX. However, when dealing directly with a telco, what equipment will we need? Basically giving us the same capability as a DID provider. If someone can

Where can I get the latest stable version of spandsp. That will work with res_fax_spandsp.so. The link listed on the voip-info website is dead. Any other location for download? http://www.soft-switch.org/ Thanks Bryant Zimmerman -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am working on an AGI script and all is going well except I can not get any of my "VERBOSE" commands to display. Is there any undocumented reason for this to occur? I am able to set variables, call other commands ect.. I am sending my verbose command in the following format (VERBOSE "Message to send" 4) Any ideas what I might be doing incorrect? Thanks