similar to: SPA942 on speaker phone does not hang up?

Hi all, There are a lot of posts around the web about my question; unfortunately I have not been able to get any of the solutions to work. I'm using Asterisk 1.6.2.8 under CentOS 5.5. I'm trying to get call pickup working for the secretaries that monitor their bosses' phones. The BLF and the speed dial works great on the Linksys phones. Call pickup is the problem. My features.conf

Before committing to about 50 of the spa942's, I like to take a last poll from those on the list to identify any negative issues that might be associated with the audio, functionality, early failures, etc, on the spa942. Expecting to deploy these using existing cat5 cabling and both rj45 jacks. Been using three of theme in a short term demo with the customer, but the demo systems has

Am having a unique problem, calls received on my SPA942 seem to end after 15 seconds, but calls made from this device do not have this problem. For this device (when receiving calls) I get periodic "chan_sip.c set_destination: can't find address for host" I have set the "canreinvite=no" in the sip.conf. Does anyone have a sample entry from sip.conf for the Lynksys SPA 942

Hello! Sorry for the OT-thread, but i don't know where else too ask... Has anyone done http-provisioning of a Linksys SPA942 with client side ssl-authentication? Where do i get the CA from? I'm aware of the Sipura mass deployment howto on voip-info.org, but it doesn't cover the authentification part. Thanks Christian

I'm using a bunch of SPA942's, and I'm trying to provision them mostly by DHCP (and what I can't set that way, I try to provision via HTTP interface into the phone). I changed the domain in my AstLinux config from "astlinux" to redfish-solutions.com, and set that in my sip.conf file as well: context=incoming

currently using 1.2.14 and zaptel 1.2.12 i'm using mfc/r2 so i can't move to 1.4 with sip jitter control and improved jitter control in zaptel 1.4. my problem is excessive jitter using linksys spa942. when i set canreinvite=no, which forces rtp to pass through *, quality is horrible. clicking sounds, pauses, etc. but when omitted or canreinvite=yes, sip to sip calls are ok. now, the

Fellow asterisk users, I am trying to get Single Line Appearance functionality working on a set of Linksys SPA942 phones and have not been successful. It looks like sla.conf is not getting read, only one phone reads as registered for the shared line, and a busy tone every time the shared extension is dialed. I have followed the documentation [1] and followed through other threads I saw

I'm running AsteriskNow 1.7.1 with a OpenVox 2/FXO/2FXS card, a Linksys SPA942 SIP phone and outgoing SIP and IAX routes. When I dial local PSTN numbers from the SPA942 using the FXO channels I observe a 5-7 second delay between when the PSTN number answers the call and when Asterisk connects the call at my end. There's enough delay time that I hear an additional ring after the PSTN

I'm running AsteriskNow 1.7.1 with a OpenVox 2FXO/2FXS card, SPA942 SIP phone and outgoing SIP and IAX routes. When I dial local PSTN numbers from the SPA942 using the FXO channels I observe a 5-7 second delay between when the PSTN number answers the call and when Asterisk connects the call at my end. There's enough delay time that I hear an additional ring after the PSTN number has

Hi, I have a strange problem. At a site where there are 20+ phones, there is one phone that cannot make outbound (to PSTN) calls. Each call is dropped after 20s with "no response to our critical packet". Calls to voicemail and internal extensions work fine. I understand that everything points to a NAT problem, but I don't understand how it could be because: 1) It does not affect

Hi, I'm running asterisk realtime, i had prob when a user does not unregister properly. I tested with SPA942 and a PAP2, when phone is registered, i call using the SPA using x-lite no problem, but when i unplugged the power, it does not unregister properly, so asterisk think SPA942 is still registered, when i call using x-lite, asterisk tries to call it.so it gets stuck at [Aug 11

I just bought an Aastra 480i CT for a client who needed cordless capabilities in their office. I'm trying to set up the base station and cordless handset in my office first. I'm able to connect the phone to my Asterisk box and make outgoing calls from either the base station or the handset - to extensions within my office as well as numbers outside the network. But I can't

I'm getting "Got SIP response 406 "Not Acceptable" back from 10.0.1.2" occasionally when try to dial to SPA942 , anyone has any idea on this before i consider Firmware upgrade? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080326/2fd2c557/attachment.htm

Hy all of you, I've successfully installed a freepbx solution with 10 extensions : - 5 on Linksys SPA922 - 1 on Linksys SPA942 - 1 on Thomson ST022 Everything seems to work fine with all the hardphones excepts last week. The thomson has a strange behaviour. It can reach french mobile cell phones but when it reaches "fix" phones, the correspondant can't hear the caller. What

Hi all, I have had (what I consider) an odd request. The installation I'm working on now is an office on a multi-floor building. They 're looking for some kind of solution with the phone system to provide door control. We are a non-profit so of course I'm looking for something VERY inexpensive. I'm sure /someone/ has done something like this. I'd appreciate any ideas. Cassius

Hello, I have an installation in Austria; ISDN service provided by Austria Telekom. The main number of the service is 6 digits. Incoming calls may contain 2 additional digits, which I then use to route the call to the correct extension. Telekom sends me all the digits. My problem is that when someone tries to dial an 8 digit number to an extension from an outside analog phone, AT sends the call

Hi, ? The current SCCP image on the 7942 phone is :SCCP42.9-0-2SR1S. We are trying to convert/upgrade the phone to SIP version of the firmware i.e : cmterm-7942_7962-sip.9-0-3 (Firmware is downloaded from the cisco support site). We have unzipped and placed all the files in the /tftp (root directory) of tftp server. Following files are also placed in the tftp directory. ? The Upgradation /

Hi list, I'm having a problem with CallerID names not showing up when calls come in. I have dialplan code to store the callerid(name) away and it is blank (null). However, the voicemail variable ${VM_CALLERID} has the name field populated. For example, here is some of the dialplan code: 2. Set(CALLER_ID_INFO_ALL=${CALLERID(all)}) 3. Set(CALLER_ID_INFO_NAME=${CALLERID(name)}) 4.

Hi, Here is a scenario: 1) A call comes in on an outside line on a DAHDI device 2) The call is answered by a SIP extension (Linksys SPA942 to be exact) 3) The SIP extension places the outside call on hold 4) The same SIP extension dials another extension. Is it possible for the dialplan in step 4 to discover the channel of the call placed on hold in step 3? In other words, since it is the