similar to: sip attended transfer beep

While on conversation with another party, I dial the atxfer key sequence. Asterisk says "Transfer" then gives you a dial tone, while put the other party on hold music. I dial the transferee number and talk with the transferee, then I hang up and the other party must be connected with the transferee. But this doesn't work the transferee hears a beep. -- Playing 'beep'

Hi everyone, I'm trying the new atxfer functionality. All seems to work fine at the beginning, but there is no audio between the party at the end of the transfer. Plus, after that, even normal calls won't work well (they can't hangup!). I'm using the Asterisk CVS from 2005-01-10 with Asterisk-OH323. Here is my dialplan: [default] exten => h,1,NoOp(bye) exten =>

Hi Is there a way to disable blind and attended transfer during a call. I am trying this configuration but unfortunately with no luck: - in features.conf [applicationmap] disabletransfer => 9*9,self,GoSub(disabletransfer,s,1) - in extensions.conf [incoming] exten => 99,1,Set(__DYNAMIC_FEATURES=disabletransfer) exten => 99,n,Dial(Sip/alice,120,tT) exten => 99,n,Hangup()

Hi I have configured attended transfer in features.conf like this [general] parkext => 70 ; What ext. to dial to park parkpos => 00-99 ; What extensions to park calls on context => parkedcalls ; Which context parked calls are in parkingtime => 300 ; Number of seconds a call can be parked for

Hi, During an attended transfer using the SIP phone feature buttons, I'm getting a few complaints from recipients that they can't tell when the call they are receiving has been transferred. Is there any way (even if it's complicated) to generate a beep tone to the recipient of the transferred call when the transfer is completed? I know you can do this with DTMF codes but they want to

I need attended transfers, but I do not have time to talk to another extension and see if they accept the transfer, my features.conf is: [general] parkext => 700 ; What ext. to dial to park parkpos => 701-720 ; What extensions to park calls on context => parkedcalls ; Which context parked calls are in parkingtime => 220 ; Number of

Hi All, I'm running * 1.6.0.28 on Debian Lenny. The init'd script starts the asterisk daemon not the safe_asterisk daemon so when asterisk is running and I ssh tot he server then 'asterisk -vr' to attach to the asterisk console there are no colors. If I use the safe_asterisk script to start asterisk, the colors are fine when I attach through SSH. I found this in the init

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

Hi, I try to set up attended transfer in my Asterisk Box . My features.conf look like this: [general] parkext => 100 parkpos => 1-5 context => parkedcalls parkingtime => 100 transferdigittimeout => 3l courtesytone = beep xfersound = beep xferfailsound = invalid featuredigittimeout = 500 ;adsipark = yes pickupexten = *8 [featuremap] atxfer => *2 blindxfer => # disconnect

I would like to know if atxfer is supported somehow because there seems to be little documentation for this feature. I know most people expect a good SIP/IAX phone to do the job but I think it's nice to be able to do attended trasnfers with a simple ATA-connected analog phone. I have Asterisk 1.2/Freepbx and features.conf has a line regarding atxfer and I set it to *2 (Default). While # works

Hi All, I just experienced a weird issue and though I'd share. I have a pretty standard business PBX setup for a business customer, local extensions, Linksys phones, call comes in and rings local extension exten => 101,1,Dial(SIP/101,20,tr) the physical phone has call forward enabled to the users home, Time Warner residential line service. Intermittently all seems to work except when the

Hi, I successfully installed asterisk 1.0 with Capi 0.35. In my pbx system I would like to use the atxfer function but is not included in the stable asterisk. Is there a way to include it in my version of asterisk: I did no used the last cvs because I can't compile the chan_capi .in it. :( Bye

using CVS HEAD :) Some config snippets: extensions.conf: [from-ip] exten => 51,1,Dial(SIP/1301,20,t) exten => 52,1,Queue(ddi831,t) exten => 53,1,Queue(marketing,t) [internal] exten => _13XX,1,Dial(SIP/${EXTEN},20,Tt) queues.conf: [ddi831] strategy=roundrobin timeout=10 announce-frequency=0 announce-holdtime=no member => SIP/1301 [marketing] strategy=roundrobin timeout=10

On Wed, Jan 20, 2010 at 2:42 PM, JR Richardson <jmr.richardson at gmail.com> wrote: > Hi All, > > I'm using Asterisk 1.4 branch and checking the status of some SIP > Peers with the functions ${SIPPEER(101:status)} and the result is "OK > (48 ms)". ?Seems to work fine. > > Now I would like to use the function CUT to set a variable with the > 'OK'

Hi All, Using Asterisk 1.6.0.28, having to register some Cisco 7940/60 with SIP firmware 7.4.0. Most functions work from the phone except blind transfer (attended transfer from phone works fine and # PBX transfer works). Blind transfer from the phone uses SIP Refer method. I've seen a bunch of posts about asterisk and SIP Refer, but I can't seem to find the version that this has been

On 6/26/07, JR Richardson <jmr.richardson at gmail.com> wrote: > Hi All, > > I have Asterisk 1.2.9.1 sending SIP calls to a Cisco 2620XM Router > with a PRI card in it, handing off to a PBX and vise verse. Calls in > and out are working fine except for DTMF from Asterisk to the 2600. > DTMF from the 2600 to Asterisk is fine. > > Here are the Asterisk console warnings

Hi all. When a user transfers a call by pressing the "transfer" soft button on their phone, I'd like it to "beep" at them when the transfer is complete. I've got it turned on in features.conf: xfersound = beep ; to indicate an attended transfer is complete xferfailsound = beeperr ; to indicate a failed transfer However, it seems that

Hi guys, I am wondering (and have been unable to find out thus far) whether Asterisk sets some special channel variables or something when a call is transfered with the REFER method. Basically, I'm trying to figure out if it is possible to somehow get a transferred call back to the transferrer (as it is done with the built-in atxfer) after X seconds (or an unsuccessful attempt). Using a

> -----Original Message----- > From: JR Richardson [mailto:jmr.richardson@gmail.com] > Sent: Saturday, June 17, 2006 2:30 PM > To: asterisk-users@lists.digium.com; Douglas Garstang > Subject: Voicemail with NFS (working, I think) > > I'm using a stand-alone VM server and exporting the VM files ro for > MWI function only. All my registration servers mount the remote

Because some users have requested transfer beep confirmations I've switched our phones over to using the asterisk transfer feature instead of the built in transfer functions of the phones. While testing it was working fine, but I changed something in features.conf and suddenly any time I hit transfer (*2), I can only enter one digit before asterisk immediately tries to dial that extension.