similar to: How to learn encrypted VoIP development for embedded systems

Hi everyone, I googled this followed the instructions, but it hasn't work for me yet. I have universal setting in SIPDefault.cnf and phone specific settings in SIPXXXXXXXXXX.cnf. But it doesn't get registered. I need to register it on two different asterisk boxes. So my SIPXXXXXXXXXX.cnf looks like this: phone_label: "Zeeshan A Zakaria" line1_name: "523"

Hi everybody, One of my customers wants to buy IP Phones and Asterisk solution, but his requirement is if he'll not be happy with Asterisk, his phones should be able to work with other IP PBX systems as well, so that he doesn't have to buy new phones again. After all IP Phones is the main investment. He'll most probably go with Nortel IP PBX system if he'll be not satisfied with

For a while now I've been looking for a good web based soft phone solution, but so far no luck. A few solutions which I've tried, both Java based and Flash based, either don't work, or had bad sound quality. I need something which I could put on my productions server for my clients. Seems like good web based solutions are all paid ones, nobody is giving it for free. Any ideas,

Hello list, What servers would you suggest for:100 concurrent SIP calls, 4xT1 card, and a not much busy website, i.e. getting 500-1000 hits a day. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101020/8ab7ae3e/attachment.htm

sorry for typo mistake in my last post. as from my orignal post two registration of the same user are as follows SIP/XYZ at 119.68.0.90:5060 SIP/XYZ at 202.16.34.10:5678 so dial command with unique-id i want to use will be Dial(SIP/XYZ at 192.168.0.20:5062-096afee8,30,rtT) Dial(SIP/XYZ at 192.168.0.12:64290-0966ab80,30,rtT) and not Dial(SIP/192.168.0.20:5062-096afee8,30,rtT)

Hello list, I need to know how to deal with a redundant network with only one asterisk server, which is receiving registrations from the end points on both of its ethernet ports. This means extension 201 is registering both from eth0 and from eth1. Is there a way/software which can act as a middle man between asterisk and the ethernet ports, and by default sends registrations to asterisk only

Hello list, I have been using Cepstral's 8KHz voices for my text-to-speech service for some time now, and have been noticing that the voice quality is really poor, doesn't matter what phrase I give it to convert. None of the other 8KHz voices I have ever used were this bad. It doesn't seem good enough system to be used in a commercial system. Is there any better quality text-to-voice

For a new project, I have written a dialplan and it is pretty straight forward: The [dialout] context dials out a number, and h extension in this context writes the CDR. But what is happening is that if the callee hangs up first, all values in the CDR are fine, but if the caller hangs up first, the 'dst' column is always 'h'. I put a NoOp right in the begining of this macro to

Thanks Zeeshan, SAngoma told me that the asterisk problem is unrelated to wanpipe drivers, they told me to reinstall asterisk again But, i still having doubts about the problem :( Thanks in advance > > Message: 10 > Date: Thu, 18 Mar 2010 00:21:06 -0400 > From: Zeeshan Zakaria <zishanov at gmail.com> > Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE >

Hi everybody, How can we add new contexts in asterisk realtime module? All I could figure out after googling is that a new context HAS to be declared in extensions.conf with 'switch => Realtime/@<databasetable>' under the context name declaration. This works fine as long as we are adding extensions only to this one context, but doesn't give the freedom to add new contexts for

Hi list, For a client I am setting up a system which will use T1 PRI from Primus, who offer only NI-1 and NI-2 protocols for D-Channels. Previousely I have only used switchtypes euroISDN and National. Although the documentation says Asterisk does support NI-1 ans NI-2, but wanted to get your opinion if you have used these protocols on an Asterisk box and if there were any things to consider. If

We are testing the innomedia ATA's to possibly replace our current line up of ATA's that we are using. Has anyone used their product? What is their track record on stability, voice quality, DTMF talkoff, T.38 Thanks Bryant ---------------------------------------- From: "Zeeshan Zakaria" <zishanov at gmail.com> Sent: Wednesday, October 13, 2010 10:41 AM To:

I've got a 778 DID for vancouver, but don't know if it will be a local call if dialed 604 and vice versa. What are the different area codes in Vancouver and why its easier to get 778 DID than 604? -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi list, For a telecom project I need to setup a SCADA solution. I don't have any previous experience in this type of monitoring and automization. I'll be using SNMP data from asterisk servers and endpoints. If anybody has any suggestion which SCADA software can fit in such a VoIP solution, your guidance will be highly appreciated. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com

Greetings everyone, I've been trying to make this java based webphone work for everybody visiting my website, but seems like for many users it doesn't work. In order to get a better idea what is the success rate of this webphone, I would appreciate help from anybody who could make a few calls from it within North America and if it doesn't work, send me what error you get, or if it

Hi, Does anybody have experience working with Aculab groomer II, to convert between ISDN E1 and non-ISDN T1, or anything similar. I am looking for sample config files. We have asterisk as ISDN E1, but for testing we set it up as regular T1 if we get sample config files. Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, MoH volume is uncomfortably high and I want to bring it down. Its mpg123. How can I do it? -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070514/2a40a5d4/attachment.htm

Hi, I have an extension which I want to use only for x-lite, and don't want anybody to register IP phones on it. I can see that 'sip show peer 3547' shows softphone's id. Is there a way to restrict registrations on this extension by useragent id? I googled but so far couldn't find any way to do it. -- Zeeshan A Zakaria -------------- next part -------------- An HTML

Hi, Everything was working fine on this 10 phone office, but for last few weeks they are complaining that audio goes blank for a few seconds during the conversation, and then comes back on. It goes blank for both parties. What are the possible causes for this to happen? -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi everyone, I have recently lost my Asterisk Admin job due to company's tight financial situation. Now I am looking for another job and will appreciate any help. I am good at Asterisk related VoIP stuff, LAN/WAN, IT, web, etc. and working in this industry for more than 4 years now. Currently I am in Ottawa - Canada. For more details if anybody interested to contact me and can help in