similar to: Cisco SIP 8.5 and 9.0 Issues

Hi, I've had some decent luck with the mark3 echo canceller from the zaptel driver, echos on about 20% of the calls, people I've called say I sound great now, but our side hears echos. I was wondering if there was any way to tweak the current software cancelers into using more CPU (and hopefully doing a better job, close to a hardware canceler), I only have 10 lines, and a single call

Hi, I've got some weird sound artifacts happening during calls, they're very hard to describe, so I have a 122kb recording: http://openprojects.rarcoa.com/~miztic/artifact.wav normally the artifacts are just short blips, not quite as long as the one above, but they sound the same. When using the aggressive echo suppressor, it seems like those artifacts cause a really loud buzzing sound to

Hi list, This is not necessarily an asterisk issue, but a lot of you guys know way more then me, so I have a question: someone at my company sets his phone to forward calls to his cellphone, so someone calls our office, call is forwarded to his cell, and the callerID that shows up on his cell is of course our office number, because asterisk originates a new call to his cell and then bridges

I have several Cisco 79xx phones (7905, 7920, 7940, 7960, 7970, ATA 186) and I need to buy firmware for them. I have contacted http://www.cdw.com and http://www.insight.com/ but they didn't respond. Can anybody tell me where can I buy SCCP and SIP firmware for my phones? BTW, I'm in Croatia (Hrvatska). I heard that location does matter. P.S. My local Cisco reseller wants to sell me

When a call is placed out the Zap interface there is a long pause followed by an error message from the telco that the call can not be placed as dialed. We have a tdm2413e with 11 1FB (POTS) lines. The number being dialed is a working local number, all dialed numbers get the same error. What should we be looking for ? Best regards, Duane Pudenz Network Infrastructure Manager Shasta

Hi everyone, I'm having a bit of an issue after upgrading from asterisk ~1.2.24 to 1.6.2.11, with the old version when the user would go to transfer a call, they would press Transfer, then the speed dial button for the extension, optionally introduce the call, and then press Transfer again to complete the transfer. Now, with the new version, when you hit the speed dial button, asterisk

Been around asterisk for two-plus years, but need a little input from the list on this topic. Have a potential client that wants to replace their old key system with *, but they want to integrate a commercial message service (they pay a monthly fee to have special MOH messages generated) into their system. The messages are essentially delivered to this customer via older generation audio

Hello List, I work for an IP communication provider in upstate NY as the engineer assisting our technical support team. We provide a number of different Telco systems to residential subscribers; and in an effort to more effectively trouble shoot termination problems I came up with the idea of creating a click to call system that will allow our agents to effortlessly place test calls. On a

I just bought an I Audio mobile device (Btw, these thigns are the coolest players on the face of the earth.. might want to check em out). It plays ogg vorbis files rather nicely. My whole music library is sitting in flac format. When I encoded my flac files (the majority a year ago) I used replay gain to save the album and track information if the flac file. Unfortunately, the I audio doesnt like

Hello. I thought I'd introduce myself. I'm the guy that wrote kexis way back when. For those of you that dont know, kexis was written before flac, and pretty much does what flac does, although its not nearly as nice or robust. I wrote kexis actualy cause I was interested in playing around with lossless compression and shorten was about the only tool that was linux friendly, but had a

Hi! I've tried the Fenton Driver for my UPS. The Powercom driver doesn't work. Here is the results: Network UPS Tools - UPS driver controller 2.0.0 Network UPS Tools - Fenton UPS driver 1.21 (2.0.0) Unknown ups - please report this ID string: #PCM SMK-1000 2001 V9.0 Detected Unknown MK-1000 on /dev/ttyS0 Have you any ideas to make it compartible with NUT. Thanks! With

Hi there, I'm in the process of installing Centos 5.2 on an IBM x236 w/ ServeRAID 7k I recently acquired to act as a samba file server. The hardware has all passed various stress tests I could throw at it so we're okay there. My question is. Has anyone had any luck getting the latest IBM ServeRAID Manager v9.0 working in CentOS? If so how? ServeRAID Manager is based off Adaptec's

Hi All, i'm a happy 6.4 user, but got some problems running pyqt4 on it. i installed all pyqt4 packages. but when i run from PyQt4.QtCore import *, i got the following error message >>> from PyQt4.QtCore import * Traceback (most recent call last): File "<stdin>", line 1, in <module> RuntimeError: the sip module implements API v9.0 to v9.1 but

Hi Everybody, It works with Peercast because Peercast receives the headers from Icecast2 and sends its own headers back to the client (Winamp, WMP, Real...). Remember that Peercast is a client AND a server... I guess Peercast doesn't send back the headers in the same way than Icecast2. Maybe Peercast doesn't use ICY/X-audiocast. Talking about Real (v9.0 and 10), I already got the

--- Wayde Milas <wmilas@rarcoa.com> wrote: > On Tue, 2004-01-20 at 23:44, Josh Coalson wrote: > > Miroslav did some experiments with searching for optimum blocksize. > > from what I remember it made at best a couple percent difference. > > there was a thread about it here a while back. > > > Did his changes make it in? I can think of a coupla ways to approach

--- Wayde Milas <wmilas@rarcoa.com> wrote: > The last one is truely frightening. AT&T hold the patent. The link > for > it is at: > http://patft.uspto.gov/netacgi/nph-Parser?u=/netahtml/srchnum.htm&Sect1=PTO1&Sect2=HITOFF&p=1&r=1&l=50&f=G&d=PALL&s1=5025258.WKU.&OS=PN/5025258&RS=PN/5025258 > Trying to read and grok it is mind numbing.

I'm on freeBSD 7.0, wine 0.9.53. When I run Orcad, it can load projects, but schematics never open (unlike other users' experiences in the apps db from Orcad v9.0). You open schematics by expanding them in the 'project' treeview window, and under wine, the little "+" box next to the treeview just dissapears when you click on it instead of expanding. Steve [steve at

Hi Stephan, I am talking about the meta-data: Artist - Song. It's weird because you are the second person on the list who doesn't get it working in Real... I just tried again with "BEK_dns" and "Radio Alcanzando Naciones" the 2 first MP3 radios I found in the stream directory and everything worked perfectly for Real (but not for WMP). In RealPlayer, I clicked

-------------- next part -------------- An embedded message was scrubbed... From: "Mikael Lyngvig" <mikael at lyngvig.org> Subject: Re: [LLVMdev] An alternate implementation of exceptions Date: Sun, 6 Sep 2009 09:53:29 +0200 (CEST) Size: 6388 URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20090906/ca20be9e/attachment.eml>

--- Wayde Milas <wmilas@rarcoa.com> wrote: > The reason for this post is I would like to know if I start coding > again > and releasing patches agaisnt flac in various areas, if they will be > accepted. I'm not sure if these additions fit the "focus" of what > flac > is meant to be, so I thought I'd discuss them first. Keep in mind > that I > just