similar to: Alert-Info advice

Hi all, Has anyone made up custom ring tones for the Polycom SIP phones? We use different rings for different lines, but the ones it comes with are all very similar. In the interesting of sharing, here's one I made up for paging: <PAGE_BEEP se.pat.ringer.13.name="Page Beep" se.pat.ringer.13.inst.1.type="chord" se.pat.ringer.13.inst.1.value="12"

Hi, I'm having trouble setting the ringtone on my Polycom 501. The relevant entry in extensions.conf is: exten => 801,hint,SIP/creative1 exten => 801,1,SetVar(ALERT_INFO="Test") exten => 801,2,Dial(SIP/creative1,20,Ttr) In the sip.cfg: <alertInfo voIpProt.SIP.alertInfo.1.value="Test" voIpProt.SIP.alertInfo.1.class="13"/> and <TEST

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone

Hello, would like to have distintive ringtone for internal calls, google gave me blurr answer. My extensions are 46**, any calls made within 46** I want to ring differently than external calls. Thanks in advance.

I am using SugarCRM together with the asterisk plugin, which allows me to click a number, SugarCRM calls my extension then places the call when I pickup. I would like to have that extension auto-answer. I set it up as line 3 on my phone so normal calls do not get auto-answered. However, I have not been able to get this to work. Has anyone implented this? This is what I put in the config file

Hi, Snom phones firmware 5.0 is now out. Try it if you like: http://www.snom.com/wiki/index.php/Main_Page. Regards, --------------------------------------------------------------------- Usman Tahir snom technology AG www.snom.com --------------------------------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to set up my SNOM 200 with extensions, with different ringtones - but it doesn't seem to work. I've defined two extensions for it in Asterisk and in the SNOM 200 configuration. In the SNOM home>settings>SIP>Lines config page, I have set the ringer for the first extension to "ringer1", and "ringer6" for the second. In

Working on a paging system for one of my sites and running into something I can't believe is this hard. In one of the zones, they want to have three different extensions ring over the pa system, using it as a loud ringer. Now the paging system does have a loud ringer built in and I can easily have it do a simultaneous ring, but all of the extensions will sound the same over the loud

(new asterisk user - currently setting up Polycom IP600 phones) Does anyone know if it's possible to make a sip phone instantly pick up on speakerphone when a particular call comes in? Eg so that you can quickly bother someone across the office without making them reach for their phone?

Hi All, I am running into a problem setting the ringtones via _ALERT_INFO on the Cisco 7960 phone. I am using * 1.2.1 and have tried setting the variable to several values. I have also tried setting the phone's software to both 7.5 and 8.2 thinking that it might be a version issue, but with no success. I have examined the packets and do see the ALERT_INFO header being sent, but the

We are running 2.1.1 with 3 expansion modules. Presence in turned on in sip.cfg, hints are set up on the extensions and buddy watch is enabled on about 40 extensions mapped to the expansion modules. We have 3 paging groups: "Building A" with 20 phones, "Building B" with 20 phones and "Both with all 40 phones. When Building A or B is paged separately, the 601 handles it

In ipmid.cfg I have: <G3INTERCOM se.rt.10.name="G3INTERCOM" se.rt.4.type="ring-answer" se.rt.4.timeout="1000" se.rt.10.ringer="7"/> In sip.cfg I have: <alertInfo voIpProt.SIP.alertInfo.1.value="G3INTERCOM" voIpProt.SIP.alertInfo.1.class="10"/> I set up a test extension: exten =>

I've been monitoring this problem for almost a month now. I realized that it is more extensive than what I described previously. I can very easily replicate this problem on every Zap channel. Following is the senario: 1. Call Zap/5 via say SIP/15 -> Zap/5-1 created and starts to ring 2. Call Zap/5 via say SIP/21 -> Zap/5-2 created and starts to ring 3. Hangup SIP/15 ->

We have an asterisk box with the following configuration: - AMD Athlon XP 2400+ - 512 MB RAM - SUSE Linux 10.1 - a Digium card TDM400P with 3 FXO - another Digium card TDM400P with 4 FXS - asterisk 1.2.7.1 - zaptel 1.2.4 I already checked that those cards aren't sharing interrupts (by cat /proc/interrupts): 0: 14119786 XT-PIC timer 1: 10 XT-PIC i8042 2:

I am preparing to setup a system using Cisco 7940 and 7960's I have the 7.1 SIP firmware on them. One issue I have run into is how to silence the ringer if a call comes in and you don't want to take it. Many phones have a DND button. I know the 79XX has the DND in the menu but it is to cumbersome to go into the settings then phone preferences then the DND and select yes. Is there any other

I was trying to get my polycom phone to auto answer. I added this to the dialplan. Used a different phone to call "22" and the phone rang it did not auto answer. Did I miss something? exten => 22,1,SipAddHeader(Call-Info:=\;answer-after=0) exten => 22,n,SipAddHeader(Alert-Info: Ring Answer) exten => 22,n,Set(__SIPADDHEADER=Call-Info:\;answer-after=0) exten =>

Hi Andrew - > I have a need to be able to identify incoming calls based on some factor > (could be time of day, caller ID, dialed number, it doesn't matter.) -- > Assuming Asterisk can differentiate between the calls I want, how do I inform > the IP501? There are "only" three line appearances -- I can't simply just > ring a different appearance since there

1. How do you set the music on hold to work with asterisk. Right now when I place a call on hold the caller hears nothing. MOH works with all my other IP phones. 2. Ringer Volume. How do you set the ringer volume? So that it's set on reboot. Thanks

Hi, I have a customer with a definitely low-tech need: he has a noisy storeroom where he wants to hear the phones ringing so he can leave the storeroom and pick up the phone in his office. So all I need is a loud SIP ringer. Does this even exist? I know paging amplifiers exist, but that`s not what I need. Mike -------------- next part -------------- An HTML attachment was

I need to ask, to refresh, is the aux power connector on the TDM400P card *only* to power the ringer on any analog phones/devices on the system? Can I still use this board, to "terminate" POTS lines and use all SIP Phones? Due to circumstances, I end up with a 1u server that has no aux power connectors available. I "have to" use this server, so am considering abandoning