similar to: Confused about notifyringing in sip.conf

I am trying to get something working that is just not doing quite what I want. It may not be possible, but I figured it was worth asking about. The details: Asterisk 11.6.0 Polycom SoundPoint IP650 phones running 4.03 firmware. We have a queue with 4 phones in it. ringinuse is set to yes and the stategy is ringall. In sip.conf, we have notifyringing set to yes as well. Asterisk is sending

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I must be missing something here but I can't figure out why I can't get DEVICE_STATE() to give me anything other than "NOT_INUSE". I have two extensions: 6666 and 6668. I used 6668 to make a call to yet another phone, so I know that it's busy. I then use 6666 to call 6668 and in the dialplan have a noop to see what

I am working on Polycom IP601 console with expansion module. I want to put on the BLF (busy lamp field) feature on all the contact/speed dial names I put on the console but I could not get it to work. *CLI> core show version Asterisk 1.4.13 built by root @ hostname on a i686 running Linux on 2007-11-20 05:26:15 UTC *CLI> sip show subscriptions Peer User Call ID

Asterisk can know that one of the attached phones is both "ringing" and "on the phone". However the sip NOTIFY it sends out to interested parties can only communicate one state, for example with pidf+xml it can either send "Ringing" or "On the phone" and so it sends "Ringing". This makes the "busy lights" less than useful, if a call

Hi, I set verbose to 3, but I do not see any RINGING notification in the CLI. On the contrary, when the phone goes UNREACHABLE I get: [Dec 13 21:10:06] NOTICE[9988]: chan_sip.c:25533 sip_poke_noanswer: Peer '152' is now UNREACHABLE! Last qualify: 130 == Extension Changed 152[blf] new state Unavailable for Notify User 154 [Dec 13 21:11:08] NOTICE[9988]: chan_sip.c:20196

Man, I really feel stupid, but after banging my head on a brick wall for several hours ... I need help! I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten 5707, and I've got an xlite on 5608. When I make a call from an outside line, I dial SIP/5608. The little blinky light on the GXP that's monitoring 5608 goes, well, "blink blink". :) I then press

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

I have a system running Asterisk 11.2.1 that has had a couple calls between internal extensions get "stuck open". I didn't catch the verbose log for the first one, since I generally don't verbosely log to file, but the second one shows that the call that got stuck was dialed, but the caller hung up before the called device answered. This server is running a hotdesking

" Hello, I have been trying to get my Grandstream GXP2000 phones to stop showing ringing state on monitored extensions. But no matter where I put notifyringing=no asterisk still sends the ringing state to the phones. Is this a bug I should report or is there another way around it. Here is how i have my subscriptions setup: extensions.conf [demo] exten => 6100,hint,SIP/100 exten =>

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Hello, is there some way to make Asterisk light up a certain light on an IP-phone ? Like MWI, the message waiting indicator can light up if there is voicemail. Could this light, or even other lights (like BLF-buttons) be used to give a visual notification to the user ? For example : if a certain value is set in the Mysql-DB and Asterisk reads out this value, can Asterisk react upon it inside

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

Hello ! I am having troubles setting up Busy Light Fields (BLF) in asterisk 1.4.18 The things work up to 80%, I can transfer the call by BLF button and I can see the green (free) status and red (busy) status. What I cannot do is to accept the call when someone rings a remote extension. The BLF button starts to blink in red telling me that the call is ringing on remote extenson, but if I press it,

Hi Is there any way to set the presence state of a peer to in-use in asterisk 1.8? The idea is to integrate DND buttons on phones to BLF. Regards -- Ishfaq Malik Department: VOIP Support Company: Packnet Limited t: +44 (0)161 660 2350 f: +44 (0)161 660 9825 e: ish at pack-net.co.uk w: http://www.pack-net.co.uk Registered Address: PACKNET LIMITED, Duplex 2, Ducie House 37 Ducie Street

Hello Asterisk community, I'm trying to use BLF with Asterisk Realtime, i've been searching for some info but nothing seems to be clear, can anyone help me eith some ideas to make this work ok? I'va my dialplan with Realtime Thanks in advance -- Saludos Danny Dias SkypeID: danny.dias1

Hi, I'm having a problem getting a snom 300 to work with BLF (extension 222). I've set it to watch extension 220 in the function key config pages as per the wiki (BLF, <sip:220 at server.com>) but I can't get the light to come on when 220 is ringing. The SIP trace page doesn't show anything coming from my PBX when 220 is ringing or in use. Any help much appreciated as this

Dear all, I've implemented BLF for use with some Grandstream GXP-2000 phones and it works fine in 1.2.x versions of Asterisk, although I tested it with version 1.4.0 and it doesn't work! Has the needed syntax changed for configure BLF for this version of Asterisk? It it a bug of this version? Or should it be misconfiguration that I'm doing? Thanks, Ricardo.

I run a hotdesking system based on the example from Asterisk: The Definitive Guide. Calls come into the [hotdesk] context, which verifies the phone has a logged in user and sends the call to users,${EXTEN},1 if there is a user logged in. The [users] context then includes several other contexts for internal/external call handling, as follows: [users] include => internal include =>

On Tue, Nov 25, 2014 at 8:14 AM, Matthew Jordan <mjordan at digium.com> wrote: > On Mon, Nov 24, 2014 at 2:12 PM, James Lamanna <jlamanna at gmail.com> wrote: > > Also, how big does the cache in frame.c grow to? > > I've recompiled with MALLOC_DEBUG on that server: > > > > asterisk -rx "memory show summary" > > > > .... > >