similar to: Wanted: UK-specific hardware recommendations (FXOand FXS)

I have a pair of Asterisk servers which are happily routeing VoIP calls. I want to hook one of them to the PSTN. Given that I am in the UK, what is a reasonably easily-available device to provide an FXO interface from a Linux box, with a minimum of faffing around with drivers? Just one line is needed, though in theory two might eventually be useful. My usual white-box hardware suppliers don't

Hi, Built a new server at the weekend and install Asterisk 1.6.0.9 and IAX and SIP work great :) The one problem I am having is getting the OpenVox (TDM400 type card) to work. It is successfully identified using WCTDM kernel module and dahdi_scan picks it up just fine. The issue is when I try and setup dahdi_channel.conf as it fails everytime. When running asterisk -rvvvv I see the port pick

We will be connecting our Asterisk server to ISDN 30 and intend using the Sangoma A101 card. The install location is in London (UK). Sangoma card at Voipon http://www.voipon.co.uk/sangoma-a101-pri-isdn-card-p-132.html?gclid=CI32vJz22I0CFQXklAodIgjHaA I would be grateful to hear if this is the right choice of card. Usage reports would be helpful. Regards Rory -- Rory Campbell-Lange

Hi, Now that I have Asterisk up and running I would like to find a good SIP gateway in the UK. I have looked at sipgate.co.uk and they look pretty reasonable. I am looking for peoples recommendations. Apologies if this is the incorrect forum for this type of request. Regards, -- --[ UxBoD ]-- // PGP Key: "curl -s http://www.splatnix.net/uxbod.asc | gpg --import" // Fingerprint:

I now have an OpenVox A400P and it is working well. Thanks to Ade Vickers for the recommendation, which I second. However, I need to make a slow transition between a conventional multiple-extension setup and a full VoIP network on these premises. So at the moment the Asterisk box shares the PSTN connection with several conventional analogue handsets. The desired result for an incoming call is

Hi All, What do you recommend? I was looking at: http://www.voipon.co.uk/sangoma-a200-fxo-fxs-analogue-card-pci-express-p-393.html But it will be 3 PCI slots. Thanks, Gavin.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I had the opportunity to test a Sangoma A200 card and I have some doubts that I would like to consult: I tried to detect the card and I had no success using the wctdm module with DAHDI. I guess this is because electronics is different because the TDM400P and OpenVox A400P cards have separate modules for each channel, while the Sangoma A200

Asterisk - 1.8.4.1 Dahdi-linux - 2.4.1.2 Dahdi-tools - 2.4.1 Kernel: 2.6.37.6 Kernel BKL: enabled I am upgrading Asterisk on this box. It has an OpenVox A400P PCI analog card with 1 FXO and 1FXS module. This server has been running just fine for two years with Asterisk 1.6.1.0 I've just upgraded all the OS and installed Asterisk 1.8.4.1. On trying to configure the A400P I get: # modprobe

Hello, I'm thinking of ordering an OpenVox A400P01 (A400P + 1 PORT FXO Bundle) for use in a old IBM 8364 thin client: http://www.openvox.com.cn/products_detail.php?genre_id=9&id=28 http://silicon-verl.de/home/flo/software/netstation-8364/ Has someone already used this hardware with Asterisk, especially on a small piece of hardware like this, and could offer some feedback? Thank you.

Hello I'd like to build myself an Asterisk server for SOHO use. Intel's D201GLY2 motherboard (http://tinyurl.com/ddarzp) looks like a very good deal, but I'm concerned about two things: 1. Will an A400P (from OpenVox, but supposed to be Digium-compatible http://tinyurl.com/ck6nfu) fit with a PCI riser, or will the CPU heatsink/fan be in the way? I downloaded the PDF from

Hello Has someone used the OpenVox A400P01 (ie. a supposedly Digium-compatible A400P board with a single FXO module www.openvox.com.cn/products_detail.php?genre_id=9&id=28) successfully? I've put it in an older PC with a Gigabyte GA-7ZX motherboard, then a more recent PC with an Asrock K8NF4G-SATA2: dmesg returns nothing :-/ Is there something specific that needs to be done in either

Hello Unless I overlooked it, the "Asterisk Reference Information Version 1.6.1.6" at www.asterisk.org/docs doesn't include instruction on how to start Dahdi when used to drive a TDP PCI card (OpenVox A400P with a single FXO module www.openvox.cn/products/show.php?itemid=20&lang=2). I'd like to know... 1. How to start Dahdi manually. Is this the right way? modprobe

At the risk of being flamed.... Has anyone had any success get the 'El cheapo' Wildcard W100P clone's (?20 flavour) to work with UK Caller ID? I'm not sure what the status of Asterisk 1.6 is with respect to UK caller ID, being that we have an odd method of sending the FSK ahead of the ring, but I'm guessing I can't be the first to ask this? Keeping in mind that cost is

Hi there, I'm having some fairly serious asterisk problems, which seem to be spread quite liberally across all asterisk versions, I've tried 1.4.2, 1.6.0.10, 1.6.2beta4 and still had exactly the same problem with static and echo on the line when using the PRI interface. A little background: Server: HP DL145 G3 Dual Opteron 246 with 2GB ram and a brand new OpenVox D110P

Hi all, I've just got an OpenVox A400P card with 1 FXO and 1 FXS module and I am just trying to get it working. But no luck as of yet. In /etc/zaptel.conf I've set the following options: fxsks=2 fxoks=1 loadzone=se defaultzone=se And in /etc/asterisk/zapata.conf I've not sure what to set exactly. For example, under [trunkgroups] what to specify there? Under [channels I set something

Hi guys.. I just wanted to know if this config could work correctly, since a lot of u guys have been working a lot with asterisk... Asterisk 1.4.21.2 -> chosen because is the last with Zaptel support ? Zaptel 1.4.12 Add ons 1.4.9 Currently i have a 1.6.1.0 Server running with no problems, but I'm about to buy a openvox a400p Card, so i would like to test both environments, 1.4 and 1.6,

Hello people, this is my first mail to this list. I'm new to asterisk and trying to set up an IVR. So far my dialplan works nice connecting with softphones, but I'm having problems to detect hangups on the analog line. Here are the details: -Clone pc with Ubuntu server 10.04 64 bits -Asterisk 1.6 -Openvox A400P, lspci -v says: 01:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX

Hi, I have recently upgraded from CentOS 5.1 too 5.2 and now run Xen 3.0.3. What would be the best way to upgrade too Xen 3.2.1 ? I presume I would also need to change my network settings for xenbr0 aswell ? Any help would be greatfully appreciated. Regards, -- --[ UxBoD ]-- // PGP Key: "curl -s http://www.splatnix.net/uxbod.asc | gpg --import" // Fingerprint: F57A 0CBD DD19 79E9

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Days ago I bought a OpenVox A400P card with a port FXS and another FXO that I am testing with my Asterisk installation in my house. I'm using Asterisk 1.4.24.1 with DAHDI Linux 2.1.0.4 and DAHDI Tools 2.1.0.2 on Debian GNU/Linux Lenny. I was reading "The future of telephony" and this [1] document looking for information about

I have this running on my Asterisk server, and have opened up ports UDP/5060 and UDP/10000-20000 but for some reason when I try and connect too my SIP extension it does not work. Are these the correct ports ? -- --[ UxBoD ]-- // PGP Key: "curl -s http://www.splatnix.net/uxbod.asc | gpg --import" // Fingerprint: 543A E778 7F2D 98F1 3E50 9C1F F190 93E0 E8E8 0CF8 // Keyserver: