similar to: Early media and IAX2

I use the Teliax service with the IAX2 protocol. I noticed 2 days ago that I was not registered with the Teliax server. I used the "iax2 show registry" command and found I was not registered with Teliax. I issued a reload command in asterisk in order to connect again. I went to the Teliax website and noticed a message which stated clients may need to reboot due to changes made with

Good evening all, hope everyone in the US had a nice Thanksgiving! On one of our internal servers, I decided to make the leap from 1.4.2x to 1.6.2.0-rc6 so I could start learning about the changes and new features that have been implemented. I upgraded all the configs, removed all the deprecated stuff, etc -- well went well. However, I noticed after the upgrade, when dialing into an

I really hate to have to make a post like this, but I feel I have little choice but to relay to the group my experience with Teliax, and explain why I recommend against using them as a primary Voip-> PSTN provider. I hope that a letter like this will inspire companies like Teliax to work harder at customer service, as well as circuit stability. We need more companies that offer the types of

Asterisk Users, I recently ran into some problems with the quality of service with Teliax. This occurred on August 1, 2007 with a dropped outbound call, audio quality isse on the callee side- not hearing me well on callee side, and sending DTMF tones (configured for RFC2833). Am I the only Teliax customer having this problem? It seems like when I am ready to go live with my Asterisk

We are unable to call certain 800 numbers through Teliax but I thought I would post this here and see if anyone else had the same problem with either Teliax or other carriers. The 800 numbers causing problems pick-up the call right away and are in the US - American Airlines (8004337300) and Staples (800-378-2753) - we can call many other 800 numbers just fine. Our asterisk setup has a 4-port

Not to point the finger at Teliax, but I'm having some unique problems with their service that are as yet unexplained. Incoming calls are fine. Outgoing calls don't work, though they did at one time. As of today, I'm running the latest code from CVS. -- Called teliax/13143212222 -- Call accepted by 208.139.204.245 <http://208.139.204.245> (format ulaw) -- Format for call is

Greetings! to all Now, with some hard time and help from many genurous people's in the list, I have come to this point with my TDM20B card & my teliax's IAX2 account. I hope someone may help me with this issue mentioned below. I have already selected my codec as gms in my iax.conf as well as in teliax's "my account page" but still i have the same error when I attempt

We are setting up asterisk with Teliax and having trouble getting the incoming call to work all the time, the outgoing does not seem to have a problem. I have worked with their support but since they say that we are getting the initial call to our server they want to charge to take a look. They did a tcpdump and we are seeing an attempt but no CLI most of the time. Some times we see this but it

I'm trying to move the asterisk server to an Amazon Web instance. We have teliax for our sip provider. I'd like for our DID lines to be connected to a users cell phone. Seems simple enough, but I'm getting the dreaded one-way audio, even with nat=yes everyplace I can think of. The dialplan is real easy: [from-teliax-sip] exten => _j.,1,NoOp("From teliax sip with exten

We have a Teliax IAX trunk that we use as an overflow for our four regular business lines into our local Asterisk PBX (Trixbox). We have our Teliax account set up so that it goes to a Teliax voicemail box if it cannot reach our Asterisk server, and we have the channel set up for 5 simultaneous connections. Occasionally, calls are sent to the Teliax voicemail box for no apparent reason. In

Hi All, I have this codec problem, I use "gsm" in my iax.conf file and in teliax settings also, but the error is still appearing as below. please help me. Kumara Starting simple switch on 'Zap/1-1' -- Executing Dial("Zap/1-1","IAX2/kumara@teliax/01194777070239|30|tr") in new stack -- Called kumara@teliax/01194777070239 -- Call accepted by

We are having issues setting up our Asterisks server with Teliax service. We are able to place calls, but cannot seem to get our Asterisk box to answer from Teliax service. We are using Asterisk with the latest AMP interface. Teliax's examples are for single SIP phone, not the voice response systems, nor do they provide any support of Asterisk other than basic sample scripts...

I am having a problem with DTMF when sending calls through Teliax (SIP). In the peer for teliax I defined dtmfmode=rfc2833 and for the most part it is working. The problem always happens when a user is trying to call a conference system. They simply cannot get into the conference because DTMF is not understood. If I dial from a land line I can get in with no problems. Any tweaks recommended

Asterisk Users, Has anybody use Voicepulse Connect for Asterisk? I am trying to cover all my bases because in the past, I got burned with poor quality of service, along with failed DTMF tones with 3 different SIP Providers (Vitelity, Broadvoice, and Teliax). I am running Asterisk 1.2.13 on the Debian Etch system, using the SIP protocol. Any insights would be great. Thanks. -John

I am using Teliax to terminate my calls, and I have 3 licenses' for g729 from Digium. "show translations" verifies that the registration took place. When I place a call, having "allow=g729" as the only allow option in iax.conf, I get the following error: WARNING[361]: chan_iax2.c:6017 socket_read: Call rejected by 208.139.204.228: Unable to negotiate codec If I place a

Apparently we've been having calls sporadically drop. We're using an IAX outbound trunk and SIP adapters on the inside. Below is a log excerpt detailing one of the calls which dropped, and it looks largely normal to me except for this: Jan 5 13:31:07 DEBUG[3776] channel.c: Didn't get a frame from channel: IAX2/teliax-2 Jan 5 13:31:07 DEBUG[3776] channel.c: Bridge stops bridging

I'm trying to setup asterisk to accept call from Teliax, request the 10 digit number from user, then dial it thru the VoIPJet. If I'm not wrong I will be charged by both providers because both connection is active during conversation. So my question is can I set the things so that I pay only to VoIPJet? Specific configuration snippets will be greatly appeciated. Thank you.

I have had good success with my efforts to send faxes over voip using ulaw, surprisingly, and I want to move it from testing to reality. I have an account with Teliax, who have been very good. For voice I use g729 and ulaw, but for faxing I can only allow ulaw. However, Teliax only sets the codec preferences by account. I have another account, but I can't see a way to register two accounts

Hi I am looking at purchasing some DID lines from Teliax to install it on my asterisk. i would like to know some feed back on "Teliax" before i purchase. suggest me if there are better sevice providers. thanks Giridhar Bandi -------------- next part -------------- An HTML attachment was scrubbed... URL:

One might also conclude that during the outage the support people were focusing on getting the system back up and were not near phones. At least that is what I would bet on. Just a thought considering how most of the smaller ITSPs seem to work. Cheers, Wiley -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of