similar to: 4 Port FXO interface

Hello, Could anyone please give some information on configuring asterisk as a gateway. What contents have to add in h.323 .conf and extensions.conf files ? Thanks & Regards Bincy K Philip -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071102/53be51ce/attachment.htm

Hi list, I'm trying to use an AudioCodec Mp114, 4 FXO Media gateway. I went trough what i could find in wiki and also trixbox forum and so far no good results. i had this in trixbox frorum : http://www.trixbox.org/forums/trixbox-forums/trunks/trixbox-2-2-and-audio-codes-mp-114-fxo-setup any successful installation? or how to? -------------- next part -------------- An HTML attachment was

I am looking at using for a Xorcom channel bank to provide some FXO & FXS ports. Can anyone tell me how well they work with asterisk and your good/bad experiences with their products? Also, how well do they work with faxes and modems? Thanks! -- ========= Eric Merkel ejmerkel.lists at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello again Asterisk people. I am running Asterisk 1.42 on an old PowerPC ibook. I have had this deployed for several years now, with pretty good results. Recently I added a callerid service to my landline (qwest). I am using the audiocodes MP114 2fxo/2fxs gateway, which is an outstanding piece of hardware once it's configured (lol). Anyhow, I can see that the gateway is passing

I receieved my first PAP2-NA yesterday from our distributor(Tech Data). It installed pretty easily and has worked great so I went to order some more of these units today. When I logged into Tech Data this morning, the PAP2-NA was now marked as discontinued and no longer available and only the PAP2 version was available which is the Vonage branded version. :( I saw someone on the list say that

I am having a problem with a new PRI turn-up on dahdi 2.5.0 and asterisk 1.8.5 that I have not seen before. The PRI is setup as B8ZS, ESF and the span shows up and ok. This PRI is merely a crossover T1 going into an old DC0 class 5 switch. I am getting the following errors over and over again [Aug 16 10:26:10] NOTICE[8002]: chan_dahdi.c:3043 my_handle_dchan_exception: PRI got event: HDLC Bad FCS

I'm currently looking to deploy an Asterisk server using an FXO media gateway to connect to the PSTN and was looking for any user experiences that may aid in selecting a gateway. Specifically i'm looking for a 4-port model under 500 dollars. Within this category exists: MediaTrix 1204 Grandstream GXW-4104 AudioCodes MP114 I've read over Voip-info.org regarding these products and

Hi, I have a spiffy new gateway which seems quite promising. It's the Audiocodes MP114 FXS_FXO (2 of each). I have got it configured and working reasonably well, but have a couple of issues. 1) Asterisk 1.2.13 voicemail seems to be hung up on by the gateway after 10 seconds. This isn't asterisk saying it's quiet for 10 seconds, it's the gateway deciding it's time to go

Hi List, I am trying to call from my asterisk box (1.2.18) to and audiocodes MP114. I keep getting an error from asterisk of -- Got SIP response 415 "Unsupported Media Type" back from XXX.XXX.XX.XX. Both box's are set up to use G729. Anyone have a hint as to what it may be ? Thanks. Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm a bit of a samba newbie, but I've googled all morning for an answer before posing this question. I'm using winbind to authenticate telnet user logins against my PDC. (Yes, I know - I'll be switching to ssh shortly :-) Anyways, I was wondering if there is a way to eliminate the need to enter the domain as part of the user name when logging in. We only have one domain, and

I have a statistical problem which has given me no end of grief recently, and am posting here in the hope that somebody can give me a straight answer. I'm a IT postgrad, not a statistician, so people may have to speak really slowly and clearly for me to get it :) I am collecting simulation data, and the results are geometrically distributed (or approximately so). From what I can gather

> -----Original Message----- > From: H. Peter Anvin [mailto:hpa at zytor.com] > Sent: Tuesday, January 19, 2016 9:17 PM > To: Tal Lubko; 'Celelibi' > Cc: 'For discussion of Syslinux and tftp-hpa' > Subject: Re: [syslinux] Embedding com32 modules and ldlinux.sys into > one file > > On 01/19/16 00:07, Tal Lubko via Syslinux wrote: > > > > To

Can you say a Virtualized Asterisk with a PRI card! http://www.phoronix.com/scan.php?page=news_item&px=OTY0OQ Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."

On Wed, Jan 20, 2016 at 2:05 AM, H. Peter Anvin via Syslinux <syslinux at zytor.com> wrote: > On January 19, 2016 12:24:50 PM PST, Tal Lubko <tallubko at yahoo.com> wrote: >> >> >>> -----Original Message----- >>> From: H. Peter Anvin [mailto:hpa at zytor.com] >>> Sent: Tuesday, January 19, 2016 9:17 PM >>> To: Tal Lubko;

I have an MP114 2fxs,2fxo which I would like to use with Trixbox, does anyone have a setup file they can share to help me work this out. Instructions or a link I can follow - thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090726/643e5b96/attachment.htm

Ok, I am back from my thanksgiving holiday, and I find there was a big snow storm here in Seattle. Apparently during the storm there where multiple brown out/black outs. I have struggled since day one to get a high quality PSTN gateway configured with my very long loop and Mac based asterisk. I originally tried the HT-488, which had multiple issues, and was unacceptable. I then purchased

Razza, I have a MP114 FXO/FXS that I have never got to work , even as an FXS, even though I have several other FXS's that work fine ie Linksys PAP2 etc.. would you put up your config? PDE

hello, I''m running XEN 2.0 on IBM ThinkPad T23. Now the weird thing is that I get two different outputs from /sbin/lspci depending on whether I run 2.6.8.1-xen0 or 2.6.8.1-bproc. In particular the output from 2.6.8.1-xen0 seems to be missing those 4 lines 0000:00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI

hi, i am trying to do autoattendant but failing. as in the manual i inserted the background(welcome-mainmenu) file so that after the sound the caller can dial the extension he wants to call. i figured that the background sound wasn't coming in the asterisk. how do we do this without first loading the welcome message? for example after certain rings the caller can dial the extension no to

I have one analog line hooked in my Asterisk box using an x100p (I think that's the model number). When I do this in my extensions.conf: exten => 1200,1,playback(pls-wait-connect-call) exten => 1200,2,Dial(Zap/1/5555551212,20,rTt) exten => 1200,3,VoiceMail(u100@lightwavetech.com) exten => 1200,4,Goto,t|1 The phone rings beyond the 20 second timeout and never really goes to the *