similar to: perform tasks outside a dial-plan (not during a call)

Hi All, I would like to separate the media traffic from the signalling. Can Asterisk send and receive media (rtp) traffic from a secondary network interface? Thanks, Harel ________________________________ This electronic message and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named

Hi All, I would like to implement a call-back option when called user is busy. Consider this scenario: 1. A caller is calling a number which is busy on another call. 2. The system will prompt the caller ("press 3 to be called back" etc.) to be called back when called user is available. 3. Caller hangs up. >>problem: how to monitor called user status after calling user has

Hi All, I?m trying to do ?things? after my Dial application terminates (e.g. play IVR to called party, calling party, etc.). I?m trying to use the local channel for this purpose but so far with no success. I?m using 1.6.1.18 and this is my extensions.conf: [Internal] exten => _22,1,Dial(Local/${EXTEN}@CW/n) ; 22 is test number exten => _22,2,Noop(After Hangup) [CW] exten =>

Hi all, How can I implement a full-featured Call-Waiting behavior on the Asterisk level (e.g. I don't want to relay on end-equipment capabilities)? I found it very strange that such a basic feature is not built-in in Asterisk (and I've googled a lot in search for this). Here is what I need: SomeuserX is calling MyUserA. They are on conversation (assumption: voice is via the Asterisk)

Hello List, I have few installations out there based on 1.6.1 or above. I'm trying to play different voice mail messages based on certain criteria's. For example, I want during office hours to play (in short): "we are not available to take your call, please leave a message", during off-hours and weekends I would play: "we are closed, our opening hours xx:xx-yy:yy, please

Hi all, Could someone please tell me what is the relative "cost" in using conf files oppose to the astdb? Basically I need to match a name to a phone number in order to have all users registered by name and not by number (which I understood is not a good practice). I have 2000 users and a complex dial-plan and server resources become an issue. I could implement this via a context in my

Hi all, I was wondering if there's any way to pass command line arguments to LLVM optimization passes when run through the opt tool. For example, suppose I register called MyPass, then I want to run opt -load libMyPass.so -MyPass 3 < input.bc and have "3" be available to MyPass as a kind of argv argumnet through some method. Or does it take a major rewrite of the opt tool

Hi all, When using "make check" with the DejaGNU test collection, I encounter two unexpected failures (they seem to be closely related). My question: are they well known, and if so what's the problem and how can I fix it? This is the error text I get: FAIL: /var/data/common/trunk/llvm/test/FrontendC/2008-05-19-AlwaysInline.c Failed with exit(1) at line 1 while running:

Hi, I'm Ryo Ota. I'm using LLVM 3.8.1. I have a quesion about inlining function in C++ API. I'd like to inline some functions in a module in the same way as `opt -inline` command. But my C++ code didn't work what I want to do. For example, by using `opt -inline` command,`main.ll` is converted into the `inlined.ll`(`opt` command worked what I want to do) [main.ll (Not inlined)]

A follow-up question: Is there a way to make different passes accept one command line option that will affect all of them? For example, I'd like to have a -optStrength parameter, that can be given to all of my passes simultaneously. Thanks a lot, Guy Arnaud Allard de Grandmaison wrote: > > Hi Harel, > > Several existing passes can take command line arguments. Have a look at

Hi all, I couldn't find any reasonable way to create the IntegerType that would match, say, intptr_t, that is the native word size of the machine I'm building on. More accurately defined, when compiling on a 64 bit Mac OS machine I want it to be Int64Ty, but if for example I'm using the "-arch i386" command line option on that machine during compilation, I want it to be

Thanks, but I'm not sure I understand. I see no such flag in clang 2.9 nor couldn't I find any mention of it. What does it do? Harel Cain On Sun, Mar 4, 2012 at 15:03, Anton Korobeynikov <anton at korobeynikov.info>wrote: > > In the good old llvmc, the -Wo flag could be used to pass arguments to > the > > optimizer. Is there a similar mechanism anywhere for clang?

Hi all, I've been subscribed to this list on-and-off and always found it very helpful. I'm facing the problem of compiling a project in Objective C with LLVM in a Darwin environment. There is a certain Objective C protocol that appears in two .m files, and so the corresponding l_OBJC_PROTOCOL and l_OBJC_LABEL_PROTOCOL symbols appear in both .o files. The problem is that while these

Hi Harel, Several existing passes can take command line arguments. Have a look at lib/Transforms/Scalar/LoopUnrollPass.cpp for example. Its command line arguments are defined using the cl::opt objects. Best regards, -- Arnaud de Grandmaison ________________________________ From: llvmdev-bounces at cs.uiuc.edu [mailto:llvmdev-bounces at cs.uiuc.edu] On Behalf Of Harel Cain Sent: Thursday, January

Hello, I have a question regarding incoming fax to local file (on the Asterisk server). While the fax is received properly (I have the tiff file generated as expected) I get the warning 'FAX CNG detected but no fax extension' on the consol. If the fax is received ok then what 'fax extension' does it expect and what should I do there? My Setup: Sender -> Public PSTN ->

Hi all, A few different though somewhat related questions here. I'm really grateful for your answers! 1. From a previous question I know that sizeof's are resolved into literals early in the front-end before IR is even emitted. It seems that they are resolved into whatever value is correct for the host machine. But if one wishes to then take the IR and emit assembly code for some other

Hi all, I'm trying to figure out a problem with relocation types 1 and 8 (as observed using otool -r on ARM/Thumb object files). Earlier, when I used LLVM 2.8 with llc to generate thumb (-march=thumb -mattr=+thumb2) assembly listings, then assemble those using the gcc of iPhone 4.2 SDK, there wasn't any problem. However starting with LLVM 2.9, the same toolchain emits slightly different

Hi all, This is a problem that occurs for me only on Darwin (MacOS) and not on Linux. When llvm 2.8 (or 2.9) is compiled with ENABLE_OPTIMIZED=1, the "opt" tool fails to load LLVM passes in dynamic libraries (.dylib) files, regardless of how they themselves were built. When opt is built with ENABLE_OPTIMIZED=0, all is well. Here is some informative output. Seems to me the problem is

I used the tool wine-config-sidenet from http://sidenet.ddo.jp/winetips/config.html which works great. I installed wine 20041201 as recommended and started wine-config-sidenet setup program and IE6 seemed to run great however, some URLs didn't work for example: www.arkia.co.il. Looking at the FAQ I noticed I should install dcom98.exe. When installing it I got windows popup stating:

Hello List, I'm working on an autodialer project. At the moment I use the Originate application then I "throw" it to an extension where I Dial() the other party and then both legs are bridged. The problem is that the Dial() will only run after the Originate finish its bit and I have lots of wasted time or even worse, the remote party hanging the call because instead of a human