similar to: Asterisk unresponsive

With some carriers the initial Audio (2-4 secs) seems to get cut off when using a Auto Attendant or Conf Meetme. Is there any known remedies for that. Just want to know if others have seen that esp. with Level 3. If Auto Attendant says - "Welcome to ABC bank" Caller only hears "Bank" -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi My call flow is T38 static IP gateway --> Asterisk --> Sip Provider--> PSTN Call is placed in reverse direction - from PSTN to T38 Gateway. T38 GW reinvites with T38, and asterisk passes it along to the SIP provider. The SIP provider challenges it and asterisk reponds to the Challenge with INVITE with Auth credentials...however, the Asterisk changes the SDP and replaces the T38

We have multiple entries like the one below in our users.conf file... where the username. Contact and secret changes for different customers and we register on their behalf to the Service Provider. For the trunk below: when the call is placed out, Asterisk (1.4.18) sends the username of "abc.com" in the MD5 Auth .....which obviously does not match the trunk setup for this Customer with

How can we set the CDR Master file to rollover at say 30 Meg and create a new one -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100827/2e98385f/attachment.htm

Hello Asteriskies, Has someone tried www.asterisknow.com ? What is the package manager used? And what is the added value compared to the well maintained debian based asterisk ? Thanks, -- Cheers, Maxim Veksler "Free as in Freedom" - Do u GNU ?

Hi, I currently have some systems on AsteriskNOW 1.7 & have been happy with its clean simplicity & reliability. Are many people here using AsteriskNOW 2.0.x? How do you feel about it? Did Digium stick with their previous philosophy of keeping everything very vanilla & making it clean & simple for someone who understands how to manage CentOS, FreePBX, tftp, ntpd, etc. but

Hello, Is it possible to set things such as parts of config files are edited though AsteriskNOW GUI while other parts remain "hand editable" ? AsteriskNOW website include screenshots but not much information (such as user manual) beside that. This thing was the one that kept us from using freepbx (let me say I don't mean it's not possible with freepbx : I mean we couldn't

Hi list, Anyone knows about the date of the official (stable) release (v1.0) of AsteriskNOW??? It's supposed to be at the end of this year, which is very close now with no signs of it. Thanks... Raul -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071218/c543b407/attachment.htm

I wish to use AsteriskNOW (the Digium repository + CentOS) with imap voicemail storage and Asterisk 1.4. After having installed AsteriskNOW with Asterisk 1.4 and Asterisk GUI I run the yum package manager and replace voicemail with imap voicemail and attempt to start Asterisk, however the voicemail module is not loaded: [Mar 23 23:30:03] WARNING[12592]: loader.c:382 load_dynamic_module: Error

Hello everyone, I have previously asked this question on the asterisk-video list, but I got directed here. I have a setup consisting of asterisknow beta4 (not sure if that is crucial) and a few clients all running X-Lite 3.0 (not eyebeam) on the local network. My computer has a USB-Camera installed, and now I would like to do some video calling with it, at least, so that the other user can

Setup is: Asterisk --->NAT--> SIP Proxy I have following entry for SIP Proxy in sip.conf [Proxy] type=peer host=Static IP (NAT Firewalls public IP) username=xxxx secret=xxxxx nat=yes???????????????? canreinvite=no???????? qualify=yes Proxy sends a call and I get this error Found no matching peer or user for <NAT's Public IP:70001 NAT is using 70001 as the source port in the

Hi, I have been looking at Asterisk SCF http://www.asterisk.org/asterisk/scf, but its not yet production ready. Can someone please pitch in about HA feature in Asterisk ? (HA -> High Availability.) Also, What would be the pros and cons of using AsteriskNow over Asterisk ? Are the versions same in Asterisk and AsteriskNow ? We have been evaluating Asterisk for our Voice Application and it seems

Hi, I'm a complete newbie to Asterisk and have been reading through documentation and sites for the last couple of hours trying to understand what to do to start my learning curve with Asterisk, and am very confused. For starters, what is the difference btwn the 1.2 and 1.4 branches of Asterisk? I can't seem to find a document that describes the changes. Secondly, what is the best

Hi All; Based on what I have to use Trixbox or FreePBX? Can someone advise? Regards Bilal

Greetings, Last week I began researching Asterisk for the first time. I did what most noobs would do; downloaded an image that seemed simple and straightforward and had some credibility (*now). I also downloaded the TFOT version 1 as a guide. As questions arose, I tossed a few out in #asterisckNOW channel..and found it to be a ghost town. Only later did i start to ask a few

I just downloaded and installed the AsteriskNow appliance (http://www.asterisknow.org) . This looks like it has lots of promise. Anyone know what the secret is to being able to actually login to the root console? thanks, Geoff

I currently have a customer that a previous employee setup with Gentoo\Asterisk. I'm looking to migrate to AsteriskNOW. They have a custom menu, which I would assume is easily replicable in AsteriskNOW. The only other thing I can think of is the sound bites for the menus. Does anyone have any advise or migration recommendations for this move? -------------- next part

Hello all. I was hoping someone out there might have some advice or suggestions regarding an upgrade from an archaic Asterisk version. I've been given the daunting task of upgrading a very old Asterisk-1.0.x install to a recent LTS version. I'll also need the install to have high-availability and failover support. From my research, it would appear that AsteriskNOW-3.0 might be my

Hello, Trying to upgrade (from asterisk18-1.8.6.0-1) to the latest RPM version from Asterisk repo I found that asterisknow-version is needed by package asterisk18-core-1.8.7.0-2 How could this be explained? Best regards, Ioan ######### [root at localhost ~]# yum update asterisk18* -x asterisknow-version Loaded plugins: fastestmirror, kmod Loading mirror speeds from cached hostfile * base:

Hi, Can anyone in the list help me with these queries on Asterisk Business Edition. *1. Why would anyone choose the Business Editon when the whole thing is avalable as GPL?* ** *2. Is there a GUI to manage asterisk?* ** *3. Can it be compared with Asterisk NOW?* ** *4. Is the CD a complete installation package?* ** *5. If im looking for hiring a server on a remote location how will i be able to