similar to: POE Splitters

I'm trying to spec out hardware for a new office, and I'd like to include power over Ethernet as an option. I've seen a handful of PoE injectors around $1000 for 24 ports and a couple switches up around $2500 for 24 ports. Are there any cheaper options, short of buying a boatload of 1-port injectors off of ebay? I don't really need more then 24 ports of PoE out of 48 total

I'm looking for 24 or 48 port IEEE802.3af POE injector. Any recommendation? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070720/3886655b/attachment.htm

I know this is on the wiki, I just want to confirm so I don't blow up my cisco phones. I've got several cisco 7940's all running using cisco power cubes. However, my boss wants me to switch just a few over to poe, but doesn't want to fork out the dough for a nice cisco poe switch, or anybody else's poe switch for that matter. So my question is, what is the '99.999%

Hi, Do you need a special cable and power for that unit or you can run it of PoE Switch? Thanks. robert

Hello people, I am having difficulties figuring out the POE power draw in watts from a Polycom IP601. I want to know how many IP601's can be powered from the Cisco Catalyst 3560G-48PS. The IP601 wallwart has: Input 120VAC 60hz 19W, Output 24VDC 500mA. I assume the output is appropriate value to figure out how many phones can be powered. The Cisco 3560 datasheet says "the 48-port PoE

I need to connect up to sixteen phones per building, I can use a cheap hub, but POE would be useful. Is there a cheap POE hub available? Everything I have seen has been expensive. Chris Mason

Has anyone gotten the Lucent / Orinoco injectors (AE-1, AE-6, AE-12) to work with the Cisco 79* series phones? I'm not sure if the are the statndard POE or not.... -Darren

Hey guys, I was wondering what POE solutions are being used ? Ive done some searching on google and found that PowerDsine seems to be good brand. Any comments,suggestions, and experiences on POE hubs other POE products would be greatly appreciated. Thank you, Steve Maroney

Hello; We have a cisco switches but they are not PoE and we need only to have PoE device so the cables come for it first to provide the power and then goes to the switch (to be like batch panel), is there something like this that can be used for the IP Phones? Regards Bilal -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have a 501 with traditional power and a 301 with PoE. I rightfully assumed that the traditional power from the 501 would work on the 301. How do I get the PoE to work? Do I use the Polycom PoE cable in addition to whatever PoE injection method I use? I have a Cisco PoE injector that works on my Cisco AP350 and my 7960. No combination of this injector, the Polycom cable, and the phone result in

I am looking to replace all of the old "Bell" (POTS) phones in my home and office with IP phones. As you can imagine I don't have a huge budget to work with but I want phones that will provide acceptable voice quality and durability. There are basically three categories as I see it 1. satellite phones (low cost, low function) 2. primary domestic phone (good quality, POE capable,

Hi there, In Cisco web site http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a008008884a.html It says that regardless of the technology used you have to buy a licencse. Does the license apply to use the phone with asterisk, or, can i just buy the phone? Also, the phone does not requiere to use an AC adapter if used with PoE injectors/switches. Can non-Cisco PoE

Hi listers, I am looking for people who have used Power over Ethernet switches, primarily in conjunction with Polycom IP 501's. I've been looking at the Linksys SRW224P, since I've had good luck with the SRW224 in our office. However, Nortel, Cisco, Adtran, etc. all have an offering, all of which vary in price. I would appreciate any input people have to offer. Thanks, James

Hello, I am trying to set up some Cisco 7940G phones with the 3com POE injectors. I have the 3CNJPSE24 power injector, this is the rackmountable 24 port injector. My question is does anyone know how to serial console into these things? I have tried just about every cable setup I can think of and baud rates but I can't seem to get anything out of it. I want to check to see what certain

As an alternative to the "expensive" PoE switches out there, I found the D-Link Web Smart DES-1316 switch for just around $400. Now, the issue is, it does 802.3af power and, as I've found out through previous discussions, this original 76?0 series phones (the non G variety) do not use 802.3af. So I'm assuming I just need to use the special cable thing as per

Is anyone using a 3com 3CNJPSE to power a 7960G? I have a couple of 7960Gs and 3CNJPSEs but no combination appears to work. Both phones work fine with a cisco power cube. I get a 47.6V reading across pins 5 and 8 on the patch cable coming from the 3CNJPSE. The network still works through the 3CNJPSE, just no power to the phone until I connect the power cube. Using two straight through wired

Anyone know what the POE draw is for the Aastra 480i phones? We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. A Cisco 3560 switch will do 15.6 watts on all 24 ports. Just trying to find out if we need that much power. Can't seem to find any info on the Aastra site. Comments?

> > Allen Casteran wrote: > > Anyone know what the POE draw is for the Aastra 480i phones? > > We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. > > A Cisco 3560 switch will do 15.6 watts on all 24 ports. > > Just trying to find out if we need that much power. > Drew wrote: > According to Aastra tech support, 5 watts

Just wondering if anyone has tried MAC OS X and panther. I will like to do SIP to H323, not sure if this will be possible on the MAC because of the Libraries PWlib and OPenh32 for Linux.. Just curious.. Anyway, anyone has an easy guide (step by step) to setup oh323 with asterisk. I saw a guide but i am not very savy on linux. thanks, Francisco ----- Original Message ----- From:

I am looking at phones for my asterisk system and seem to have a problem. The only Power over Ethernet phones I can find that support the IEEE standard are 3com. Cisco uses its own proprietary ( and is expensive to boot ), snom has a different but equally non-IEEE method, and i'm havent found another phone that I'm confident can do the job for our office. Whats a good high quality ip