similar to: Asterisk Queue + Caller ID issue

Ok I have a queue that is working perfectly. The problem is when one of the agents is outside the building on an external phone line (say a cell phone). My telco hangs up on the call . I think the telco is hanging up on these calls because there is no CID attached. (I know my telco wont connect calls without ANI, so that is what it is my assumption) So first I need to prove my assumption

Alright I've been having an issue when trying to dial out locally when coming from SIP. This used to work no problem, now it doesn't. Now the local PRI to Bell Is working fine I have calls coming in and out of it constantly right now. BUT if I try and make a local call from SIP (from X-Lite or one of our Linksys SPA2102s) It fails every time with errors like these == Using SIP RTP

I am trying to receive both CID and DNIS from the telco through a non-pri T1. Currently I have the T1 setup and operational both outbound and inbound calls are completed as should be expected. The calls came in and were placed in the context specified in zapata.conf on exten => s,1. I have requested that the telco provide callerid (they call it ANI) along with 10 digit dnis for my 800

I currently have Asterisk deployed in my office with a TE411P. On the first port of this card is a T1 from the telco setup for D4 AMI. Unfortunately, I'm not receiving caller ID on inbound calls from this line. The caller ID information is arriving in the form *ANI*DNIS*. In zapata.conf, I have signalling set to em_w. The DNIS always arrives correctly, but I'm never receiving the ANI

Hallo! Finally we have E1 PRI connected to our Asterisk box. Now I have one question. My internal extensions (_XXX) are SIP phones connected to Asterisk. Our telco routes some public numbers (_71602XX and others) to our Asterisk via E1. Some internal extensions can be reached from outside using public numbers (e.g. 7160234 -> 200), and some others cannot. Everyone can call outside

Hi, I would like to know if one can set the outgoing caller ID within Asterisk when calls are going out through: 1) an analog POTS line (I suppose not) 2) a telco BRI line (I don't think so) 3) a telco PRI line (maybe) 4) a voip provider (surely) Thanks, Vieri ____________________________________________________________________________________ Moody friends. Drama queens. Your

I have the below script that doesn't seem to be working. I don't know if I have something in the script wrong that I am just missing. Or if I don't have the php.ini set correctly for emailing This is the CLI output -- Executing [4099XXXXXX at port3_real:1] Goto("DAHDI/50-1", "newhire,s,1") in new stack -- Goto (newhire,s,1) -- Executing [s at

I can't seem to hide and/or set my caller ID from *. I'm using a quite recent (three weeks or so) CVS with an E400P card. I have pridialplan=unknown in zapata.conf and I'm based in the UK. The relevant bit of pri debug looks like this (reformatted to fit 80 char width): > Calling Number (len= 4) [ Ext: 0 > TON: Unknown Number Type (0) >

Hi list, Hopefully, some of our Dutch members can help with this one. I'm also based in the Netherlands and am using a Sipura (Linksys) SPA-3000 (firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test system. It works fine, except that the Called ID (CID) is not working. I'm aware that KPN (our local telco) requires a separate subscription to activate CID on POTS

Hi Folks, having an issue with outbound calls through a VOIP provider. Calls get sent out with the CallerID(number), but where does callerID(name) come from? Apparently not from provider, as we are seeing different (sometime missing) names on inbound calls, different than what we have configured. Apparently this comes from some telco database somewhere? Numbers were ported from a wired-telco.

Dear List, My problem is that the incoming Caller Id is not displayed on the local analog phones (connected to a TDM400 card). I receive the CID correctly from my telco, but when I place the call to the internal analog line, the CID is not propagated. An interesting point: when I try to place a new call to an already bridged line, I see the second call with the CID on the analog phone. The

We have just had an ISDN PRI service commissioned here in AU (using Powertel as provider). I have called them and ensured that we have the ability to set Caller ID on our service to any number in our 100 number block, and I have been assured that everything is OK from their end (unlikely). Every time I drop a sample.call in to /var/spool/asterisk/outgoing with the Callerid: option set, the

Alright I have a SIP phone located off premises with a very annoying issue. Well I say a sip phone it is actually two phones hooked to a Cisco Spa 2102 Link: http://www.cisco.com/en/US/products/ps10026/index.html Each phone being a different line/extension. Alright either line can ALWAYS make outbound calls no issue. The problem is on the Inbound side. I'm completely stumped as

I'm having a weird problem with CallerIDs and I can't tell if it is a problem with Asterisk, the telco, or the VOIP provider I'm using. Basically, I am using Asterisk as a proxy for my cell phone. People call in and the call gets forwarded to my personal number. The feature on my phone allows for unlimited phone calls from one number, any time, for $7/month, so I'm saving a

Hey all, I recently noticed that DTMF caller-ID was implemented in CVS, so I requested the service from my telco (the Dutch KPN) and tried to get it going in Asterisk (current CVS), without success so far. This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2 HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm trying to get caller-ID working on is obviously on the

There are times when I need to call a client from my cell and I want a recording of the call. I was trying to put into an * a way of doing that. Below is what I'm using in my extensions.conf exten=> X,1,Read(num,"/var/lib/asterisk/sounds/mtas/10digit",10,,,5) exten=> X,2,SayDigits(${num}) exten=> X,3,Background(/var/lib/asterisk/sounds/mtas/verify) exten=>

Has anyone gotten CID from Bell Canada to work properly with *? We have our * box down at our datacentre in St Louis, and whenever we call it from a Bell Canada Telephone line, all we see is '' for the CID. I did some digging on google and the mailing lists and couldn't find anything pertaining directly to Bell-Canada and * CID, but didn't find much. I did however find :

I have an installation which is currenly using 14 DID Trunk Lines. I need to be able to use Caller ID information and currently it is not available on these lines. Is there another way to access this information? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040105/62559e22/attachment.htm

Dear All, I am trying to setup an ISDN line from local telco on a digium card. The problem I am facing is that I am not getting any caller id from the telco. They say that they have enabled caller id. Please help me out. My zapata.conf -------------------------------------------------------------------------------------------------------------------- [trunkgroups] [channels]

We do not get caller ID (name) on our telco lines. However we have a few single line extensions with consumer type handsets that ring at odd hours with "Asterisk" before the phone is picked up, and "Out of Area" after it is picked up. I have read that "Asterisk" is what is reported by Asterisk for 0 length caller ID number. But since we don't