similar to: Junghanns QuadBRi not really recognized in Dahdi

Hi, On lenny, when I'm adding a "blacklist hfc4s8s_l1" statement in a /etc/modprobe.d/myfile.conf file, this change seems ineffective until I reboot : # dahdi_genconf -v system Default parameters from /etc/dahdi/genconf_parameters Empty configuration -- no spans Generating /etc/dahdi/system.conf I tried this : /etc/init.d/module-init-tools then this : /etc/init.d/udev restart but

2010/8/24 Olivier <oza_4h07 at yahoo.fr> > Hi, > > On lenny, when I'm adding a "blacklist hfc4s8s_l1" statement in a > /etc/modprobe.d/myfile.conf file, this change seems ineffective until I > reboot : > # dahdi_genconf -v system > Default parameters from /etc/dahdi/genconf_parameters > Empty configuration -- no spans > Generating

Hi List, I'm setting up a system with one TDM400P (2*FXO + 2 * FXS) and one Junghanns QuadBRI on a Fedora Core 6 (Kernel 2.6.20-1.2944.fc6). I'm using the bristuff-0.3.0-PRE-1y-e kit. It download zaptel-1.2.16, libpri-1.2.4 and asterisk-1.2.17 When it's the time for ztcfg to do its job it complains with <ZT_SPANCONFIG failed on span 2: No such device or address (6)>

Hello, 1. How can specify in /etc/dahdi/genconf_parameters file that a port from a B410P board is to be "disabled". Playing with comments (see bellow) doesn't help : file /etc/asterisk/dahdi-channels.conf is filled with 4 ports data. pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 TE # SPAN/4 TE 2. How can specify groups in

Hi, On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18, I inserted a new Digium HA8 + B400M card. My usual installation fails. I can see it listed : # lspci -n | grep d161 01:0b.0 0200: d161:8007 (rev 11) # lspci -vn 01:0b.0 0200: d161:8007 (rev 11) Subsystem: d161:8007 Flags: medium devsel, IRQ 22 I/O ports at d400 [size=256] Memory at

The information (or lack of it) on upgrading from zaptel to that @&*^QW%&^%!!! dahdi is very frustrating. I cannot find anything on how to uninstall zaptel, i found an earlier post to this list which suggested make uninstall and make remove in the zaptel directory which just generates errors and does nothing (on zaptel 12.1). Then i install dahdi-linux and dahdi-tools and i want to

Hi, I'm using a revision 6822-enabled Dahdi-Tools (see https://issues.asterisk.org/view.php?id=13897) with a Junghanns QuadBRI. 1. Do I still need qozap driver ? If positive, how is it recommended to get it ? 2. Which line should be included in /etc/dahdi/modules to have the appropriate driver loaded ? 3. The process I'm planning to use is : A- Hand edit /etc/dadhi/modules,

Hi, My genconf_parameter is : # grep -v "^#" genconf_parameters lc_country fr context_lines remote group_lines 1 bri_sig_style bri echo_can oslec pri_termtype SPAN/* NT (I also tried various identations and syntax for pri_termtype line such as bri_termtype but I still get the same output file). But still, generated system.conf contains

Hello, On a very new system, I've got : # cat /etc/dahdi/genconf_parameters | grep -v "^#" lc_country fr context_lines remote group_lines 1 bri_sig_style bri_ptmp echo_can oslec pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 TE SPAN/4 TE # dahdi_genconf Empty

Hi, I'm using revision 6822 of Dahdi Tools. # dahdi_hardware pci:0000:05:06.0 wcb4xxp+ d161:b410 Digium Wildcard B410P # asterisk -rx "dahdi show version" DAHDI Version: 2.2.0.2 Echo Canceller: OSLEC # cat /etc/dahdi/genconf_parameters ... pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 NT SPAN/4 NT #

Hi, How to properly re-configure dahdi, when for instance I want to change from TE to NT mode ? I'm planning the following operations : /etc/init.d/asterisk stop /etc/init.d/dahdi stop rmmod dahdi rm /etc/asterisk/dahdi-channels.conf rm /etc/dahdi/system.conf rm /etc/dahdi/modules nano /etc/dahdi/genconf_parameters dahdi_genconf -v modules dahdi_genconf -v system dahdi_genconf -v chandahdi

On Thursday 28 Apr 2016, Mamadou NGOM wrote: > Hello, > it doesn't work my dahdi yet .for information, i use debian 8 . > I put the file dahdi.bash in /etc/init.d and I gave it the permission 755 > but i have the same error: bash: /etc/init.d/dahdi: No such file or > directory You need to name the file just "dahdi", not "dahdi.bash"; because the command

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we

<!DOCTYPE html> <html><head> <meta charset="UTF-8"> </head><body><p>Hello,</p><p>I have not resolved my problem.I renamed my  dahdi file  "mv dahdi.bash dahdi " in the directory /etc/init.d, but it doesn'nt work yet.</p><p>the same error after the command  <strong>/etc/init.d/dahdi

Hi I have a TDM400 and 4 channels of HPEC. I don't use the POTs lines much so I didn't realize it wasn't working. This morning I was watching the console and noticed that the echo canceller didn't load when a call came in. /etc/dahdi/system.conf showed mg2 for all 4 channels. I changed them all to hpec and then restarted dahdi and Asterisk and suddenly HPEC was working. Is

Greetings, I have a quad port Tormenta 2 PCI card (uses the tor2 driver), which I have been successfully using for some time on an older, power-hungry Intel machine. I recently moved it to a newer machine with an Intel Atom D510 CPU in an effort to save on energy costs, but I cannot seem to get it to work there. Both machines are running Ubuntu 13.10 x64, with DAHDI support coming from the

Hello, I just installed a Debian Jessie box from scratch which sports a Digium TE435 digital card. I installed the software, built and loaded the kernel modules: # dpkg -l|grep dahdi ii asterisk-dahdi 1:11.13.1~dfsg-2+b1 amd64 DAHDI devices support for the Asterisk PBX ii dahdi 1:2.10.0.1-1 amd64

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux and DAHDI-Tools version 2.4.0. DAHDI-Linux 2.4.0, DAHDI-Tools 2.4.0, and DAHDI-Linux-Complete are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete In

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux and DAHDI-Tools version 2.4.0. DAHDI-Linux 2.4.0, DAHDI-Tools 2.4.0, and DAHDI-Linux-Complete are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete In

Hi, After an upgrade, I discovered yesterday strange things I would like to share here. Basically, I'me comparing platforms: The first one is a 2.6.26 (Debian Lenny) platform, with Asterisk 1.6.1.18, Libpri 1.4.10.2, Dahdi revision 8853 (must be between 2.3 and 2.5, I think). The second one is a 2.6.32 (Debian Squeeze) platform, with Asterisk 10.5.1, Libpri 1.4.12, Dahdi 2.6.1. Both are