similar to: Strange problem with zap channel.

2023-11-08 18:14:13] ERROR[571246][C-000017e2] : Got 19 backtrace records # 0: [0x5bd18a] asterisk utils.c:2800 __ast_assert_failed() # 1: [0x4618e3] asterisk astobj2.c:589 __ao2_ref() # 2: [0x58e660] asterisk stasis_cache.c:824 update_create() # 3: [0x58efed] asterisk stasis_cache.c:903 caching_topic_exec() # 4: [0x586b90] asterisk stasis.c:1380 dispatch_message() # 5: [inlined] asterisk

Hi, I'm having an issue with busy detection, the busy is not being detected. Asterisk: 1.6.2.13 DAHDI: 2.4.0 Chandahdi: busydetect=yes, busycount=2 Indications zone = us, with the modifications for my country for busy: 425Hz Pattern(0.2ms on, 0.2ms off, 0.2ms on, 0.6ms off) I compiled with BUSY DETECT DEBUG. I can see: [Feb 10 15:48:06] DEBUG[26968]: dsp.c:1276

Hi, I'm having strange warning from asterisk when I try to dial GSM Gateway: -- Executing [1011501522xxx at sm:1] NoCDR("SIP/ibm-b2c52848", "") in new stack -- Executing [1011501522xxx at gsm:2] Dial("SIP/ibm-b2c52848", "Zap/R3/501522xxx") in new stack -- Requested transfer capability: 0x00 - SPEECH [Jul 13 11:58:50] WARNING[18208]:

I create my sip users using a common macro in 1.4: [internal] exten => 200,1,Macro(phones|200|SIP/200) [macro-phones] exten => s,1,Dial(${ARG2}|45|Tt) etc... But now in 1.6 this fails: -- Executing [200 at handsets:1] Macro("SIP/201-0942b530", "phones|200|SIP/200") in new stack [Nov 20 08:55:55] WARNING[5958]: app_macro.c:201 _macro_exec: No such context

Hi, I have the following dialplan. Problem is, if the user authenticates, * starts counting as billable seconds even if i hangup the phone before the called party answers..And also as disposition.. it accepts all calls authenticated as 'answered' If i commentout the authentication line everything works as it should be. How should i use authentication that, it should accept it as aswered by

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state

I need some extensions logic assistance, I'm trying to dial out one of multiple SIP trunks, in sequence. I need to detect a busy SIP trunk(I only allow 1 call per trunk) and roll over to a second or third depending on that busy status Here's what I've got for a macro thusfar, but it's not working(fails if the 1st trunk is busy) extensions.conf: [globals] trunk_1 => SIP/trunk1

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Hi, there. I have asterisknow beta 5 with the following data: Ip 192.168.0.60 mask 255.255.255.0 gw 192.168.0.1 the router (a linksys) has port forwarded the port udp 5060 and from 16384 to 16482 udp-tcp from the internet to the asterisk machine. the only protocol allowed is g729. Which work fine for the ip phones I already have setup in the LAN. My problem is trying to register to a voip

I have a trixbox 2.2 and Nortel santral that are speak each other. I use digium TDM100M 2 fxs-2fxo. After I made yum update I had met with some problems when I want to make any call from extension of trixbox to extension of nortel. When I attend to log (/var/log/messages) I meet with these messages as you see below. When I try to make any call from trixbox extension the call seems established but

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

I have a SIP phone calling via a SIP trunk another asterisk system, that then sends the call out a ZAP channel. When I press any of the features defined in features.conf, The end user on the ZAP side hears the DTMF tones, and none of the features work. My DTMFmode on the SIP users definition is rfc2833 Asterisk console doesn't register that a feature is being recognized, any ideas? Below

Hi everyone, having a issue with asterisk and my new Voip providers service. Iv set up many asterisk systems before but never seen this and have tried to fix this with no luck.. I have used this exact same sort of setup for 5 other providers and never had this issue, If i replace the trunk login details with my works voip account and set it to IAX then it works perfect, Just not the new

I just had a user report that they called out to someone on a cell phone this morning, and after a short conversation, the call was dropped/lost. The person on the cell phone says that this is very rare, and would not suspect the dropped/lost call to be on their side. I have looked at the asterisk/full log as thoroughly as I can, and have pasted the lines which seem relevant to that call below.

Hi, We have a PRI Trunk (physical E1) and we are getting some rather weird and very isolocated problems. On outbound calls to specific numbers, it would seem to me that DTMF from the remote side is affecting the local asterisk system. Basically what happens: - We make a OUTBOUND call via the PSTN (PRI Trunk) to a remote System - Remote Answers, and converse - Remote sends DTMF on their site to

Hello List, I am having a strange issue with a trixbox system we installed for a client, and I would appreciate any help on this one. The issue is that occasionally when they go to answer an inbound call from the Sangoma A200 - there is no one there, and they are presented with dial tone. The calling party is hung up. A bit of background: The client actually has two systems install (one at

hi all I have a PRI line which i have connected to my asterisk server. I am able to make calls to mobile no through my asterisk server, while i am not able to make calls to land line nos. This is strange. Where do u think the? problem is , is it from the service provider or? mis configuration of my asterisk. I am from India and using airtel pri lines. Below i am pasting you my configuration file

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

On Wed, Jun 16, 2010 at 4:35 PM, Shina Owolabi <shinacalypse at gmail.com>wrote: > Hi! > I've installed Asterisk 1.4.32 with freepbx-2.6.0 in an attempt to provide > a conference bridge for an existing Avaya PBX. I have no control over the > Avaya system, but I am able to speak with the admin in charge when I need > stuff done. I am running all this in a VirtualBox