similar to: OT - Newbie: Do I have a shared IRQ ?

Hi, On my system I've got : CLI> dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO B4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS AMI YEL 0 db (CSU)/0-133 feet (DSX-1) B4XXP (PCI) Card 0 Span 2 OK 0 0 0 CCS AMI YEL 0 db (CSU)/0-133 feet (DSX-1) B4XXP (PCI)

Hello I've got small PBX (30 simultaneous connections) based on asterisk (1.6.2.6), which uses Stargate 2N ISDN to GSM gate. It runs ok for day or two, but then I get: dahdi: HDLC Receiver overrun on channel TE4/0/1/16 (master=TE4/0/1/16) in my kernel logs, in asterisk i get: pri show spans PRI span 1/0: Provisioned, Down, Active PRI span 3/0: Provisioned, In Alarm, Down, Active (span 3

Hi, I'm having trouble with one machine that kernel panics with Asterisk 1.4. The motherboard is an Asus P5W Deluxe. I reported the kernel panic here: http://lists.digium.com/pipermail/asterisk-users/2009-November/241006.html I'm now trying to understand if the problem can be an IRQ issue or not. I disabled APIC in the BIOS because I thought that maybe it could be buggy (not sure

Hi xen-users, I install xen, on gentoo linux. Install was ok, but i have an issue that i can''t solve. When booting in xen-linux, whereis no eth0 interface. When i boot non-xen kernel all is ok, eth0 is present. I use 2.6.18-xen kernel version. lspci show me: 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation

I am running irqbalance with default configuration on an Atom 330 machine. This CPU has 2 physical cores + 2 SMT (aka Hyperthreading) cores. As shown below the interrupt for the eth0 device is always on CPUs 0 and 1, with CPUs 2 and 3 left idle. But why? Maybe irqbalance prefers physical cores? My understanding, though, is that the even-numbered CPUs are the physical cores, with the

...SNIP... cat /proc/interrupts=20 CPU0 CPU1 =20 0: 83 0 IO-APIC-edge timer 1: 2 0 IO-APIC-edge i8042 3: 100887 0 IO-APIC-edge serial 7: 0 0 IO-APIC-edge parport0 8: 3 0 IO-APIC-edge rtc 9: 1 0 IO-APIC-fasteoi acpi 16:

Anyone else seen this eth-device and what brings it up? [root at oh1mrr etc]# ifconfig __tmp1192348344 Link encap:Ethernet HWaddr 52:54:AB:DD:2E:D1 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2094689 errors:0 dropped:0 overruns:0 frame:0 TX packets:1645734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX

Hello, I wanted to relaunch my problem with a quite precise and small question. Could the command "lsusb" affect interrupts when executing it regularly (cron) and if the zaptel pci card is sharing an interrupt with a usb bus? I have a Digium PRI card and a few Xorcom USB Devices. The Digium card seems to share the IRQ with some USB bus. cat /proc/interrupts CPU0 CPU1

I'm looking for assistance with pci-passthrough on CentOS 6.2. I've installed libvirt version: 0.9.4, package: 23.el6_2.8 from yum. I have a windows XP client setup via virt-manager which boots and runs fine until I attempt to assign a PCI device to it. The error log reads: -----------------/var/log/libvirt/qemu/SageTv.log---------------- 2012-06-02 22:55:07.801: starting up LC_ALL=C

Hi list, I've a problem with my system on CentOS 6.5 x86_64 on a workstation. During utilizzation, after several hours after boot (6/7 hours) I get an error: Disabling IRQ #16 and after this seems be that 3d acceleration is unloaded. This is a workstation with a dedicated vga (nvidia gt450) and 3 nics. This problem started when I've plugged the third nic. Without third nic all works

Hello, I am trying to get a Wildcard TE110P to work in a relatively modern HP Proliant DL385p Gen8 server. Being a potent 12 core Opteron server I expected no problems. Much to my dismay the dahdi_test results are constantly terrible: # dahdi_test Opened pseudo dahdi interface, measuring accuracy... 89.101% 89.195% 89.142% 88.957% 88.953% 89.115% 89.089% 89.134% 89.066% 89.021% 88.933% 89.044%

http://bugs.freedesktop.org/show_bug.cgi?id=15233 Summary: geforce 7800gs and AGP 3.0 DBI function Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

Hello CentOS ! Iam trying to configure a Dual Core 1.6Ghz AMD E-350 machine to be able NIC (eth0) interrupts the most efficient way possible so that I can be able to handle the large number of random source packets per second. Currently running CentOS 6.4 2.6.32-358.6.2.el6.x86_64, i made some load testing with a random sourced syn flood to the NIC of this machine and found out according to

Hi fellow asterisk users, I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel module) an approx. 100 snom320. The whole installation is running without issues since 5 months. Without having changed anything on the asterisk server for at least 2 months, i noticed "clicking sounds" at external calls over the PRI. Asterisk constantly throws the following messages: ...

Hello all- I have a Digium TE410P in an HP DL145 G2 dual processor server that generates well over 100,000 interrupts per second (sometimes I?ve counted 160,000+ per second) generally resulting in either the system becoming swamped and unusable or the kernel disabling the IRQ the TE410P is on resulting in the spans on that card being unusable. I have confirmed that the card is good by placing it

Hi, 1. Has someone met any success at all, connecting a Digium B410P to a Patton Smartnode 4638 (with latest 5.3 firmware) ? 2. If positive, then, which signalling was used on both sides ? My project's goal is use a Patton Smartnode 4638 to act as telco BRI lines, from a B410P-enabled asterisk box. In my testings, I can see channel is respectively up (with patton web server status page)

Hi all, As i tested with Asterisk+dahdi+libpri with openvox BRI with NT mode, the ISDN phone does not work. There is the setting and error. ***********************Enviroment********************************** Asterisk-1.6.1.18 dahdi-linux-2.3.0.1 dahdi-tool-2.30. libpri-1.4.11.2 CentOS-5.5 OpenVox B400P ******************************************************************** In my case , I set prot 1

Hello All, I have 2 Digium card configure on Single machine, which can't share interrupt across all CPUs and sometimes asterisk reach 100% CPU usage. Here is system details and /proc/interrupt o/p. OS: CentOS 6.4 Kernel: 2.6.32-431.11.2.el6.x86_64 Dahdi Version: DAHDI Version: 2.7.0.2 Echo Canceller: HWEC Asterisk Version: 1.8.13.0 Output: /proc/interrupts cat /proc/interrupts

Hello, I seem to be having an issue with the configuration of my PRI on a new asterisk server I've created to replace an old install that I have. The card is Digium Wildcard TE133. I continually get messages like "Primary D-Channel on span 1 down", rather irregularly: [2013-07-29 17:31:39] VERBOSE[3621] sig_pri.c: == Primary D-Channel on span 1 up [2013-07-29 17:31:39]