similar to: Transfer calls using ##

Last week I asked about MWI indicators on wireless phones that would work with Asterisk. I sent a message off to Panasonic asking them about it because in their ads they specifically stated that the indicator works with and requires phone company voicemail subscription. The is the model TG5631. Specs here... http://www.amazon.com/Panasonic-KX-TG5631S-GigaRange-Cordless-Answering/dp/B000F4C2CA

I just bought an Aastra 480i CT for a client who needed cordless capabilities in their office. I'm trying to set up the base station and cordless handset in my office first. I'm able to connect the phone to my Asterisk box and make outgoing calls from either the base station or the handset - to extensions within my office as well as numbers outside the network. But I can't

Hi - > I am not sure what I did but blind transfers do not work. The Polycom does > not allow me to dial the extension of the person I want to transfer to after > I hit: > > transfer -> blind I would strongly suggest getting the latest firmware, and using the sample configuration files with that firmware to set up your phone. This SHOULD work. If it still does not work

Hi - I have an fairly vanilla answering machine (actually its a combo cordless phone/answering machine) attached to an FXS port (on a TDM400 Card). Everything is working as planned except I seem to be having a bit of trouble with the answering machine. After is answers it plays the outgoing message and then hangs up before letting the caller leave a message. (it actually hangs up before the

Hi! I have a Grandstream VoIP Device, at which a DECT base with 2 cordless phones are connected. If a call is placed and made through one cordless phone the other cordless phone appears as busy. What I want: 1. The Base station of the DECT cordless phones, is connected at 1 FXS Port of my Grandstream Telephone Adapter. 2. I want to place and receive as many calls at the same time through 1 SIP

This is a dialpaln issue. I solved the same problem recently. For 4 digit extensions you need to append the dialplan statement in the sip.cfg configuration file as follows <digitmap dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2 -9]xxxT|1xxxT" dialplan.digitmap.timeOut="3"/> Michael > I am not sure what I did but blind transfers do not

In that example you could make outgoing calls only correct? (since incoming likely needs port forwards) I guess the questions becomes "how often are you going to do that to justify the extra $100 or so you going to pay for a wifi sip phone?" Paul Fielding (paul.fielding@shaw.ca) wrote: > > I think some people are missing the point. You can't throw your cordless >

OK, I have a Asterisk @ Home 1.0.7 server with two Digium TDM400 cards, one 4 port FXO and one 4 port FXS. When I plug an analog cordless phone into the TDM40B card and setup a ZAP extension, the phone rings in and you can answer just fine. The weird part is when you try to get dialtone from the cordless handset it rings all of the other extensions... One other thing to mention is that the

Dear list, I am playing with Sipura 3000 since last week. Through the wiki pages I could get running it reasonably well. My setup is that of a Sipura, linked with a local analog cordless phone, a local PSTN line and the setup to link to an asterisk server located at a remote static ip address. I can dial the cordless phone from other extensions located at the asterisk server; I can dial out

Hi Folks, Looking for feedback on the cordless phones with the Aastra 480i CT handset. Is voice quality comparable to standard consumer residential 2.4GHz cordless phones in the US$30 - $50 price range, or better/worse? How about handset and speakerphone quality for the main phone? Seems like there have been various big issues with firmware in past, but is it pretty stable now? Thanks,

I have a dilemma. I am trying to setup an asterisk setup for about 10 people, but with the ability to expand to 100s. We are looking into hardphones to use for our systems. Here are the requirments I am looking for: SIP Not POE Full duplex Speakerphone $100-$300 We would like to have the cordless and corded option if possible (at least for 3 of the 10 people). So here are the

Hi all, I'm using regular analog phones with * and an ATA186, and I plan to move to cordless phones. But cordless phones usually have no way to flash hook cause there is no hook :-) I seem to recall there is a way to simulate a flash hook using dtmf tones in *, but I can't find which combination to use. More generally, where can I find all those magic cominations to put people on hold,

Has anybody have any experience using the KX-TGP500 Cordless DEC 6.0 "System" with asterisk ? I run a small asterisk server at home using two SPA3102s, and thinking of upgrading my cordless analog phones to something a little newer. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello! Attached to the bottom of this e-mail is an edited version of an e-mail I originally wrote to Digium tech support regarding Ouch and Power alarm errors I have been receiving on my TDM400. It contains a great deal of detail regarding my setup. In the end, I have found that one of the 5 phones I'm trying to make work with Asterisk is contributing to the generation of these errors.

Can anyone recommend a good cordless user-configurable SIP hardphone that is readily available in the states and doesn't cost $300? There seem to be a plethora of decent and affordable corded phones (like from Grandstream) but the search for a cordless unit seems elusive. I purchased a vtech 8100 online only to discover after receiving it that it is locked to vonage service. Thank you.

This is rather bizarre: My TDM11 (one FXS) rings a $10 passive phone with REN of 1.0B, a cheap speaker phone of 0.3B, and a cordless phone with marked REN of 0.0B. But it couldn't properly ring this 27935GE3-B (FCC ID G9H2-7930) cordless phone rated at merely 0.1B. Rarely, the phone will crack out an occasional weak and abrupt beap, but never a normal ring. Otherwise Asterisk and TDM400P

I have a situation where we have an asterisk box that is extending several Mitel PBX extensions to some cordless SIP phones (Cisco WIP310). Everything works great, except when the cordless phone walks out of range of one access point and into range of another (cisco 1100 series APs). I've been able to get virtually seamless roaming between access points to work in the past with data but

Hi, I have a problem with this particular gamepad. I calibrated it under linux with jscal and it is working OK. But now I want to play FIFA with it and fifa don't detect it as Logitech WingMan Cordless Gamepad but as controler. I found wine registry tips and followed their guide for DirectInput but I have a problem because command specified there doesn't give the expected output: Code:

Hi I am trying to setup asterisk at home, I have 1 in bound VSP (I have a register cmd setup for that in asterisk). At home I have a cordless phone with 2 line capability - I currently have 2 spa3102's in place to handle the 2 lines ( I am in the process of buying tdm410 to handle to handle this and the backup pstn line). I also have 2 laptops setup with soft sip phones. What I would like

does anyone know of a 2.4 or 5 ghz cordless phone system that has an ip base station? thanks