similar to: Xorcom Experience

I am looking to build a small PBX for an office that has 3 incoming analog lines and less than 10 extensions. For the Asterisk server I am going to use a small form factor PC with no-PCI slots so the FXO interface needs to be either FXO->SIP or USB. Can anyone make suggestions? I am looking at an AudioCodes MP114 FXO or possibly two Sangoma U100's but don't have experience with

Anyone on the list ever used it? I'm trying to quote a system with 192 analog ports, one of the options are the Xorcom 32 channel FXS USB Channel Banks. Any input would be appreciated. TIA

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

Hi folks Xorcom Rapid 1.0 is avilable for download Q: 1.0? A: Sure, better than 0.9.1: * Asterisk 1.0.5 * Base packages upgraded * Built with SpanDSP support * Improved Zaptel detection * ast-cmd with some useful command-line abilities provided * ssh installed by default * putty.exe is included on the CD * music-on-hold files removed due to potential licensing issues

Hi all, I would be most grateful if someone would review my plans for my new phone system and comment on areas of expected trouble and advice on what to do better. Instead of moving our Panasonic KX-TD1232/TVS200 system (ugh...) to our new location, we've decided to jump into IP telephony with *. But we are new to * (but not Linux), so we're trying to learn as much as we can before we

Hi I put a snapshot of our current packages updates.xorcom.com . They are available from the deb source deb http://updates.xorcom.com/test sarge main (this is s/rapid/test/ of the name of the source of the stable version) Changes include: * Fixed and simplified zaptel detection * Support for spandsp: compiled but not yet tested * IAX extensions * Mail server configuration * The script

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

Dear List; Thanks alot for the help. But how can I let the second dial tone (after pressing the extension to select that FXO port) to be difference than normal dial tone? Regards Bilal Ghayad -------------------------- Correction, on FXO port not FXS, second, read his email first: "Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP

Hi Version 0.9.0 of Xorcom Rapid Debian/GNU/Linux/Asterisk has just been released. Main changes: * A decent version of Asterisk/Zaptel (1.0.2) is provided * Includes a better default configuration * Automatic detection of the most common Zaptel cards * Contains more optional software (apache, MySQL, Webmin and others) - available via menu You can get it from:

Hi all Xorcom Rapid 1.1 is here. * Asterisk 1.0.9 * Flash Operator Panel * improved Zaptel hardware detection: should hopefully detect E1, T1 ZapHFC and qozap. No more channel numbers guessing in zapata/zaptel.conf * and much of the "extra" software available for it You can get the full details at http://www.xorcom.com/rapid so I'll just highlight the points that I

Hi, I'm having some trouble setting up a Xorcom Bri 4 port. I have compiled asterisk and zaptel using the Bristuff bristuff-0.3.0-PRE-1y-g patches. So I'm running zaptel-1.2.17.1 and asterisk-1.2.18. The problem I'm having is that for one I get no LEDs showing if the unit is in TE and NT mode (not a issue for me but may have some impact on things) I have no errors in any logs I

Same question for asterisk-users as well: ----- Forwarded message from Tzafrir Cohen <tzafrir.cohen at xorcom.com> ----- Date: Wed, 7 Mar 2012 21:14:04 +0200 From: Tzafrir Cohen <tzafrir.cohen at xorcom.com> To: asterisk-dev at lists.digium.com Short version: it's now time to remove. Anybody actually uses latest DAHDI with RHEL4? See inline, On Thu, Dec 29, 2011 at 07:42:39PM

On Mon, Jun 15, 2015 at 04:56:31PM +1000, Tim Groeneveld wrote: > > ---- On Mon, 15 Jun 2015 16:46:13 +1000 [Lucio] wrote ---- > >Hello all, > > > >I'm new here and I'm interested in building a small PBX with asterisk at > >home. I have one single PSTN line and ethernet cabling in place. I > >already have fairly decent PC that I can use (AMD FX

Hello, I am trying to update to dahdi 2.2.1. But somehow the xorcom (2BRI) device does not want to work. I pasted below the information I have. pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader reset pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader usb 'xpp_fxloader'[4937]: --------- FIRMWARE LOADING: (usb) [1 devices] ..Got all 1 devices 'xpp_fxloader'[5003]: ---------

I'm having trouble getting a xorcom set up. A large part of the problem is that the box is a _long_ way away and I can't get to/at it easily, so while I could probably fix this in a few hours if the machine were in front of me, I'm struggling over a slow unreliable laggy link. Ok, enough whining from me. I have a new Xorcom plugged into the usb of a Suse 11 machine I built Dahdi

Hello, I recently got a problem I have never seen during my previous installations. I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux and asterisk 1.4.22. Everything works fine but after some time zap channels disappear in asterisk. root at pbx1:~# cat /proc/zaptel/* Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN 1 XPP_BRI_TE/00/00/0 Clear

, address 2 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.344611] ERR-xpp_usb: XBUS-00: x= usb_listen: usb_submit_urb failed: -19 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353325] INFO-xpp: XBUS-00: [] D= isconnecting Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353373] Zaptel: Master changed = to XBUS-00/XPD-01 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353382] Zaptel: Master changed = to

hi i am thinking to use some xorcom hardware i only used digium hard... what do you think? it work ok? what about echo? it is plug and play only reload or i need to restar asterisk ? i understand the drivers are in the trunk of asterisk, is this rigth? have any one a conf file of a xorcom device? any other important comments are welcome. Thanks David -- (\__/) (='.'=)This is

Okay, i'll move my discuss to asterisk-users. Thank you. On 1/17/07, Tzafrir Cohen <tzafrir.cohen@xorcom.com> wrote: > > > On Wed, Jan 17, 2007 at 04:39:03PM +0800, ??? wrote: > > Jonson Player wrote: > > > Hello, I intend to buy a FXO/FXS device from Linksys. > > > I'm thinking about SPA3102. What you guys thik about it. > > > Is ok, is

Hi, I have upgraded an Asterisk installation with a Xorcom BRI Astribank that was working under Ubuntu 8.04 to Ubuntu 9.10 and the device is no longer initialized. When I reload the udev rules, I see that the rules seems to be correctly loaded: udevd[452]: reading '/etc/udev/rules.d/40-xpp.rules' as rules file However, these rules do not seem to be triggered: # udevadm trigger