similar to: res fax help

Hi Guys, i am using the latest version of asterisk 1.4 (1.4.33.1), dahdi (2.3.0.1) and FFA (Applications: 1.4_1.2.0, Digium FAX Driver: 1.4_1.2.0). the issue i'm having is that i'm able to receive faxes from a website (that offer this service) but not able to receive from a regular fax machine (that is working perfect). [fax-rx] exten => receive,1,NoOp(**** FAX RECEIVE ****) exten

Hello, I have a noticed strange behavior in Asterisk 1.6.18.2 with ReceiveFax Digium FAX Driver: 1.6.2.0_1.3.0 (optimized for i686_32). I use a context [capi-in] for icoming ISDN calls: ====== [capi-in] ; Faxe fuer Ruben exten => 12345,1,Macro(faxin,ruben.roegels at jumping-frog.org,${EXTEN}) ====== My macro for the fax receiving looks like that: ====== [macro-faxin] ; Faxe ; ARG1 =

Dear all, When receiving a fax, the extension is "spawned", despite nothing but positive messages (see below) The sending fax considers it a success & the verbose output of asterisk gives a "FAX_SUCCESS" and a "NO_ERROR" error in the ReceiveFax command. The problem is that all the next steps (conversion of the fax to pdf & sending it to a mailbox) are never

This message is pointed directly to Steve Underwood. I tought it would not be nice to directly email him with a question that interests a good part of the Asterisk community, so here it is. :) Steve, remember a few days ago when we discussed about issues on Asterisk 1.6.1.13 and T.38 fax reception? Well I opened an issue on Mantis (https://issues.asterisk.org/view.php?id=16756) and turns out it

We're having an issue where we call ReceiveFax in a context that includes a hangup extension and half the time dialplan execution doesn't continue after the fax is received successfully. Am I missing something simple here? Below is a sample call where this happened: The last log line for this channel/call is: [Feb 21 09:10:53] VERBOSE[13730] res_fax_digium.c: -- Channel

In my quest to actually send a fax, I'm now stuck trying to send the confirm. First I send the fax: -- Executing [send at outbound-fax:2] System("Console/dsp", "env echo -e "Channel:DAHDI/g0/12036378447\\nContext:fax-tx\\nExtension: s\\nPriority: 1\\n" >/var/spool/asterisk/outgoing/call-1254012878.0") in new stack -- Auto fallthrough, channel

Hi all, I am running to the following problem, when using the below dialplan to receive fax, everything works perfect till this line exten => receive,n,ReceiveFAX(${FAXFILE}): and then the following line cannot be executed, it's like asterisk can't go back to dialplan and continue, the good news is when i check what is received in my fax folder i find that the file is a valid one (not

Hi, folks. I'm having a heck of a time trying to get outgoing T38 faxing (I don't need inbound right now) working with FFA and Gafachi. G711 faxing works (as well as can be expected over the internet), but I want the higher reliability of T38. I'm running Asterisk 10-beta1. When I drop my callfile in to make the call, I get this: -- Attempting call on SIP/18884732963 at

Hello users, Recently i have installed the free version of FaxForAsterisk and trying to work with it by sending a fax on T38. My version information is as follows i)Asterisk 1.6.0.20 ii)res_fax-1.6.0.14_1.1.6-x86_32 iii)res_fax_digium-1.6.0.14_1.1.6-i686_32 sip.conf [general] t38pt_udptl=yes extensions.conf [default] exten => _XXXXXXXXXX,1,NoOp(Fax Incoming Call) exten =>

To provide a reliable fax solution for users connected to a Asterisk 1.6.2.6 server i have tested a few T.38 capable ATA's: - Patton M-ATA - Grandstream HandyTone 486 - Fritz!Box 7170 I have tried Asterisk 1.6.2.6 compiled with SpanDSP-0.0.6pre17 and also Asterisk 1.6.2.6 with Fax for Asterisk installed. These Asterisk servers are connected to a Cisco PGW 2200 + AS5400XM. Sending fax

I am having troubles with sending faxes. I hope someone can help me work out a better method. Basically we have a special address that our users can send to. It winds up on our Asterisk server which runs a Python script that parses the message for attachments and the phone number from the recipient address. The attachments are converted to TIFF and stored in a folder with various information

Hi, I'm trying to build R packages. My package name is TEST. (/Users/apple/Documents/R/TEST)I type something in Terminal.But it showed an error... applede-macbook-pro:~ apple$ R CMD BUILD TESTError: cannot change to directory 'anRpackage1' I don't know where is wrong...Hope that you could help me!! Thank you!! Best Regards,Gina

Hi, I'm getting error: ' FAX session '9' is complete, result: 'FAILED' (FAX_FAILURE_PARTIAL), error: '3RD_T2_TIMEOUT', pages: 1, resolution: '204x196', transfer rate: '9600', remoteSID: '' ' when I tried send fax more than 2 pages to Asterisk using T.38. First I set speed rate to 14400 which I was getting same error message while

Is it possible to force T38 for all invocations ReceiveFAX() ? Receiving fax always worked OK on Callweaver though I could put SipT38Switchover() into the dial plan. I can't with Digium fax, and it always fails at the point it decides to switch to T38.

Hi I noticed that all my fax negociated in *V17 *hangup Here my conf fax show version FAX For Asterisk Components: Applications: 1.8.4-rc2 Digium FAX Driver: 1.8.4_1.3.0 (optimized for i686_32) Here an example of failed fax: -- Channel 'SIP/VOIP-OUT-00000043' FAX session '1' started -- FAX handle 0: [ 000.000053 ], STAT_EVT_STRT_TX st: IDLE rt:

Hello, I have Asterisk 1.6.1.12 with FAX For Asterisk Components: Applications: 1.6.1.5_1.1.6 Digium FAX Driver: 1.6.1.5_1.1.6 (optimized for core2_32) If I use call file with spool -------------------------------------------- Channel: SIP/IP/DEst No MaxRetries: 0 RetryTime: 10 WaitTime: 50 Application:SendFAX Data:/var/spool/asterisk/test.tif

Hi All, I seem to have stumbled on a bit of a problem. When trying to send a fax with Fax For Asterisk on 1.6.2.x (have tried 1.6.2.5, 1.6.2.7 and the current svn version, with FFA 1.2 I get a core dump each time. Here is an extract form the console: [May 12 22:47:09] DEBUG[22584]: app_queue.c:1084 handle_statechange: Device 'SIP/vltb-sbc01' changed to state '1' (Not in use)

Hello List. We are having some problems using t.38 together with a Cisco voice router at one of our providers end. We are using the new digium asterisk fax module to generate the fax, and when we use together with our internal Audiocodes Mediant 2000 gateways, we have no issues what so ever, and the faxes go right through. When we send faxes to our other provider, who has cisco hardware

Hi, Does anyone had the problem of asterisk SendFax + spandsp sending only the first page of a multi-page TIFF file? Seams to be related to spandsp ECM config. Any thoughts about it? Thanks, Gabriel -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20121005/ac471600/attachment.htm>

Hi, I have been logged in as root, and it seems to me that i destroyed all my PATh Variables. How can I restore them ? Thnaks for your help and best regards Niels -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20060611/5b396f74/attachment-0002.html>