similar to: asterisk-users Digest, Vol 69, Issue 16

To provide a reliable fax solution for users connected to a Asterisk 1.6.2.6 server i have tested a few T.38 capable ATA's: - Patton M-ATA - Grandstream HandyTone 486 - Fritz!Box 7170 I have tried Asterisk 1.6.2.6 compiled with SpanDSP-0.0.6pre17 and also Asterisk 1.6.2.6 with Fax for Asterisk installed. These Asterisk servers are connected to a Cisco PGW 2200 + AS5400XM. Sending fax

I just want to pdf and email faxes coming in over pstn on a TDM400P. Outgoing faxes would just go out over pstn, not through asterisk. All the voipinfo , etc, howto's are quite complicated. And most use third party apps like Hylafax. I thought there was a rxfax and txfax in 1.4. And 1.6 had app_fax. I'm now using 1.4.22, but I'd go to 1.6 if it made this easier. But I've

Receiving a fax pstn - pstn with 1.6.2.6-rc2: -- Executing [s at incoming-pstn-line:1] Answer("DAHDI/4-1", "") in new stack -- Executing [s at incoming-pstn-line:2] Wait("DAHDI/4-1", "3") in new stack -- Executing [s at incoming-pstn-line:3] Dial("DAHDI/4-1", "DAHDI/g0,36") in new stack -- Called g0 --

Using spandsp-0.0.6-pre17, SendFax on 1.6.1.18 and ReceiveFax on 1.6.2.8. Sip.conf on both sides has t38pt_udptl = yes. -- Executing [s at fax-tx-test:3] SendFAX("SIP/side-sip-00000009", "/var/spool/asterisk/fax/20091113_1455.tif") in new stack [Mar 20 17:05:34] WARNING[6433]: app_fax.c:178 phase_e_handler: Error transmitting fax. result=49: The call dropped

Hi, I am recently updated my asterisk 1.4.1 to 1.6.2.6 because of fax service. I have installed spandsp 0.0.5, then 0.0.6 pre 17 as well because to have support. app_fax is available in menuselect and loaded into my asterisk. The upgrade went without any problems. ast*CLI> module show like fax Module Description Use Count app_fax.so

Receiving a fax with 1.6.1: == Spawn extension (incoming-pstn-line, fax, 1) exited non-zero on 'DAHDI/4-1' -- Executing [fax at incoming-pstn-line:1] NoOp("DAHDI/4-1", "Fax Detected") in new stack -- Executing [fax at incoming-pstn-line:2] Goto("DAHDI/4-1", "incoming-fax,s,1") in new stack -- Goto (incoming-fax,s,1) --

hi folks. i recently upgraded asterisk to 1.6.1.17(from 1.2) and i'm having problems with fax. after receiving fax with the ReceiveFAX app. everything seems ok. the .tiff file was there, phone line seems to hang up. then asterisk will crash. any ideas? also i looked in the log file. this is what before it crashed: [Mar 8 12:12:12] WARNING[30115] app_fax.c: WARNING T.30 ECM carrier not found

Hi all I don't know what went wrong but i no longer seem to be able to compile asterisk. I first do : cd /usr/src/dahdi-linux-2.1.0.4 make clean ; make all ; make install cd /usr/src/dahdi-tools-2.1.0.2 ./configure ; make clean ; make all ; make install ; make config So far.... so good but then when i do : cd /usr/src/asterisk-1.6.0.6 make clean ; ./configure ; make all ; make install i

Hi, With 0.0.6pre3: # ./build.sh CMake Warning (dev) in CMakeLists.txt: No cmake_minimum_required command is present. A line of code such as cmake_minimum_required(VERSION 2.6) should be added at the top of the file. The version specified may be lower if you wish to support older CMake versions for this project. For more information run "cmake --help-policy CMP0000".

Hello, In my scenario, the asterisk machine is installed behind a CISCO mediaGW in order to be able communicate with the PSTN. Asterisk is configured to use T.38 to send and receive faxes. I'm trying to receive a fax from a fax machine located in the PSTN. Apparently everything goes well: the fax machine says the transmission was successfully completed, and the fax file is successfully

You now need to compile and install SpanDSP-0.0.6pre3 at least (AGX has been changed). After you've done that - try AGX again. HTH -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Olivier Sent: 11 March 2009 06:16 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users]

I downloaded spandsp0.0.6pre17 I download http://sf.net/projects/agx-ast-addons for app_txfax and found trunk/app_fax to be newer so I used that. spandsp compiled fine. app_fax compiled when loading I get: [Apr 5 08:55:54] ^[[1;31;40mWARNING^[[0;37;40m[7505]: ^[[1;37;40mloader.c^[[0;37;40m:^[[1;37;40m433^[[0;37;40m ^[[1;37;40mload_dynamic_module^[[0;37;40m: Error loading module

asterisk 1.4.32 have zapata.conf soft link to chan_dahdi.conf to use flash operator panel < 2.0 (from extensions.conf) exten=> 304,1,ChanSpy(Zap/4|q) exten=> 304,2,hangup There is no entry ChanSpy(Zap/41) in extensions.conf On dialing 304 and Zap/41 is in use this happens: [Jul 1 18:24:47] VERBOSE[14447] logger.c: -- Executing [304 at flash:1] ChanSpy("Zap/31-1",

Hi all, I read on serveral pages that chan_spy is not part of asterisk anymore as on http://www.voip-info.org/wiki-Asterisk+cmd+ChanSpy on the bottom of this page. I have a testing server with debian-testing and debian packages for asterisk installed. In the modules directory /usr/lib/asterisk/modules is a app_chanspy.so already there. The currently installed version is 1.4.13. So, it is

Hi folks, I am having a small problem with asterisk-1.6.2.7 + app_fax on OpenBSD 4.7 -release. Everything seems to work fine. I have a macro which answers, receives the fax to a tiff, and then runs a script (mailfax) to convert that to pdf and email it. It all works perfectly except for some errors I am seeing in the console. After it hangs up I get a dozen or so messages in the cli

This message is pointed directly to Steve Underwood. I tought it would not be nice to directly email him with a question that interests a good part of the Asterisk community, so here it is. :) Steve, remember a few days ago when we discussed about issues on Asterisk 1.6.1.13 and T.38 fax reception? Well I opened an issue on Mantis (https://issues.asterisk.org/view.php?id=16756) and turns out it

Hi! Have probably not understand how fax is working in Asterisk 1.6. I did install: ptlib-v1_12_0 h323plus-v1_19_7 dahdi-linux-complete-2.2.0.2+2.2.0 spandsp-0.0.5 asterisk-1.6.2 asterisk-addons-1.6.2 make menuselect in asterisk-1.6.2 source directory shows: [*] app_fax But "core show applications" doesnt show me any "fax applications" and when I try to receive a fax:

1. Subject. 2. asterisk16-1.6.2.6-1_centos5.src.rpm have not asterisk.logrotate in SOURCES 3. for "--without dahdi" diff SPECS/asterisk16-my.spec SPECS/asterisk16.spec 750a750 > %{_libdir}/asterisk/modules/res_timing_dahdi.so 879d878 < %{_libdir}/asterisk/modules/res_timing_dahdi.so

Hello, All. I have a problem with receiving fax through T.30. I'm calling 543 number from fax machine, then start sending fax and fax machine send document without problem. But asterisk don't receive fax. I can't find good documentation for app_fax and I'am googled this errors. Please help me. software: asterisk-1.6.2 OS: ALT Linux 5.0.1 Ark Server hardware: Digium Wildcard

Everyone we have a few new things to give back to the asterisk community. http://bugs.digium.com/bug_view_page.php?bug_id=0002379 http://bugs.digium.com/bug_view_page.php?bug_id=0002380 http://bugs.digium.com/bug_view_page.php?bug_id=0002381 These include app_chanspy, the ability to spy on ANY bridged call taking place inside asterisk. NOT just ZAP as with ZapScan/Barge. Native format_* files