similar to: Inbound configuration

O.K., so AsteriskNow 1.4.26.2, FreePBX 2.6.0RC2.1 We have a Digium TE205P connected to a single span if ISDN PRI. The Telco has assigned us two local numbers to test incoming calls. I created an inbound route for one of those DID's and assigned it to one of our extensions. Sounds simple enough. Too simple, apparently, when I dial the number the caller gets a recording that it's a

1. Does "Wrap-Up-Time" apply to all queue agents/extensions that just rang,= or only the one who actually answered the call (I assume the latter)? 2. Does the "Member Delay" delay the ringing of new calls to agents, or onl= y come into play AFTER the agent answers the ringing call? Any other suggestions for how I can resolve this issue? I am wondering whet= her "Agent

XO fixed my caller ID name. I am using FreePBX and I can include a "wait" to my custom extensions. Is there a way to add a wait to the whole PRI? I assume that if I set immediate to yes, I can then have a "s" extension do the wait, but how would it get from the "s" to the DID extension? (also, I would rather not answer every call) Is there a "magic" spot

Greetings- First, my apologies for the OT post. Yes, I understand this is not the FreePBX-users mailing list. But, there are a large number of people that use FreePBX and I'm hoping they can be of assistance. I have a system running Asterisk 1.4.27 (see... relevance!!!) and FreePBX 2.6.0. There are a large number of inbound routes configured for the various DID's coming in via PRI, SIP,

Hello all, The Asterisk Management Portal (AMP) is now known as FreePBX. FreePBX 2.0.1 is now available for download. A **BIG** thank you goes out to the project developers for all their hard work, and to beta testers for running FreePBX through it's paces! This exciting new release boasts a better user experience, additional functionality, and a new module system. The module system is

Hi every body, I've set up a Trixbox Server with TE110P,all things seem to work fine(Thank You Malling lists & irc & Forums), but i need your help, i ve 30 numbre from 60 to 89, i need to specify for each sip extension a Zap number for example to call the sales service the caller must call 555-4570 and automaticly the caller will be redirected to the 202 ( sales service ) so nobody

Hi, I have configured the below things: Extensions Trunk Outbound route Inbound route IVR Ring group If anybody call to my DID number, my IVR is responded. After that, if he press 1, then Ring group will be activated. All are working fine. My Problem: I want to avoid IVR for some phone numbers depends on their called IDs. If my common users will call to my DID

Hi List, I have configured TE121PF card in E1 mode. I am using asterisk 1.6 and freepbx 2.7. My card staus turn in to green and looks like sync with the service provider. My service provider is BSNL - India. I have one toll free number for incoming and one land line number for out going calls. Problem : If i am calling to the toll free number, i am getting the ring but that call is

Hello all, Weird trouble here: we have 60-some happy subscribers on a FreePBX box, each with its own phone number, with no problem at all, except for one (and only one) subscriber who has this problem: his outgoing calls are ok, but when someone dials his phone number (be it from our network or from any other place in the world), the caller ears the standard message signalling he has entered the

I have the following problem when calling from outside my asterisk box : ********************* Extension 'my ISDN phone number' in context 'from-pstn' from '' does not exist. Rejecting call on channel 0/1, span 2 ********************* The card is zaphfc configured (group=2), the calls form internal to outside are perfect. If I had a chan_capi card, I shoud add

I am wondering if anyone knows of a way to do this, as it would be much more meaningful for our CDR reports. We use FreePBX under the Elastix distro. We are able to set the CALLER's CID on inbound calls by using the "Asterisk Phonebook" module in FreePBX, then configure the Inbound Route settings to use it for CID. I haven't seen anything like this to apply those same rules to

OK, i am hoping that someone will be able to help me out. I am using FreePBX 2.8.1.4 I have two asterisk servers connected with a iax trunk. The trunk is working fine when used via the outbound route setting. meaning an extension on one server can call a specific extension on the other server. now what i want to do is set it up so that an incoming call (from a third server) is redirected to the

hi there, i run asterisk 1.4 on my debian machine, which is in my internal 10.x.x.x network, behind my main computer, i cam make call, receive calls, all works fine, with all providers except sipgate.de, there i can receive call and make them, i can hear the other end but they can not hear me, this is only the case with sipgate.de i don#t know how to configure it and thought maybe someone can help

Hello everyone, I have a Atcom AX-1600P(1) card with a FXO module and I can't configure it. I have four extension with this PJSIP settings: --- /etc/asterisk/pjsip.conf --- [transport-udp] type=transport protocol=udp bind=0.0.0.0 [6001] type=endpoint transport=transport-udp context=from-internal disallow=all allow=ulaw auth=6001 aors=6001 direct_media=no rtp_symmetric=yes force_rport=yes

so here it is, the problem that's been nagging me for the past 2 days: connected a box to my telco's NTBA <-> zap/asterisk. which works: box:/etc/asterisk# cat /proc/zaptel/1 Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 ACTIVATED (F7)" HDB3/CCS 1 ZTHFC1/0/1 Clear (In use) 2 ZTHFC1/0/2 Clear (In use) 3 ZTHFC1/0/3 HDLCFCS (In

Good Morning, I've recently gotten Asterisk installed and configured our IVR using FreePBX. Things seem to be going well except a few of our inbound callers are ending up in the wrong place when trying to connect to a specific extension. The example I had this morning was someone trying to call extension 212 and getting connected to the Sales queue which is option 2 on the IVR. I looked in

Got 1 issue I can't seem to knock out of this particular box. The IVR works fine on the zap channels and the incoming SIP routes. But coming in via the IAX2 route leaves me with a silent phone. The prompts all work still letting me navigate the menu. But just can't hear anything. This is with A@H 2.8 (Asterisk 1.2.7.1, with FreePBX 2.1.0 also installed) Any thoughts on where to

But it does indicated that a variable is staying assigned that should not be, which could have other impact over time??? The behavior is very different for c call where there is a dialplan match for the dialed number, when the call completes the channel extension variable is cleared. If you do not mind please ad a bug note that you experienced the same thing! The bug marshals think I am nuts.

Yeah the "variable stays there" because the channel is never up to be cleared. If you do something like exten => _X.,1,Wait(1) exten => _X.,2,Hangup You will see the same behavior. Can you confirm?? I am running CVS from about a week ago... Alex > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com >

I'm having a problem receiving incoming faxes and I'm hoping someone here can help me out. My system is a PBX in a Flash with one dahdi card for my incoming analog lines and another dahdi card for my analog devices (fax and modem). My dahdi-channels.conf file looks like: ; Autogenerated by /usr/sbin/dahdi_genconf on Tue Jun 23 14:56:24 2009 ; If you edit this file and execute