similar to: Asterisk, IAX, & Sub interfaces

I need some extensions logic assistance, I'm trying to dial out one of multiple SIP trunks, in sequence. I need to detect a busy SIP trunk(I only allow 1 call per trunk) and roll over to a second or third depending on that busy status Here's what I've got for a macro thusfar, but it's not working(fails if the 1st trunk is busy) extensions.conf: [globals] trunk_1 => SIP/trunk1

Before I start, I just want to say this is not necessarily a problem with ASTCC, but may be a problem the way I have set up ASTCC (and possibly the way others have set it up as well). The issue is that ASTCC tries to match the pattern *anywhere* in the called number, not necessarily only at the beginning. I have set up ASTCC Routes like this: 1800 Tollfree Trunk1 0 0 100 1416 Canada Trunk2 0 0

Hi! I am having difficultly in having users of various SIP devices obtain the correct behaviour when they call a busy number ie. only hearing the Congestion/Busy tone. I assume this might be because the SIP device itself generates the 'ring' tone? With my current setup in the dialplan extract (below) the user of the SIP device hears one 'ring' and then the busy tone if a number

Hello, For lab testing, I'm trying to build two differents PJSIP trunks between two Asterisk 13.8.0enabled boxes. I thought I could set up both trunks like this: Box A/port 5060 <------ Trunk1 -----> Box B/port 5060 Box A/port 5062 <------ Trunk2 -----> Box B/port 5062 and declare trunks like this: [foobar1] type=endpoint transport=simpletrans context=from-customer

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there. I've done some googling around to try and find an example of what I'm trying to do, but it's one of those things that just seems hard to find the right terms to search for. If there's some documentation out there on this, I'd appreciate being pointed in the right direction. If not, then if someone has some

I just thought i'd post a small sample that uses the new chan_local to show one way of doing variable callfwding This sample extension.conf uses's the ast DB to store a users current extension, in a db family of CallFWD and the unique Key is based on the current channel the user is assigned. In the globals var section each key is hardcoded EXT1, EXT2 this is used in the [incoming] context

Hi, In my dial plan I've configured two trunks to make outbound calls (trunk1 and trunk2) to same service provider but I want when any of my exten starts with _2. should goto trunk2 and there should be some kind of disturbance (like some noise or some background noise) when my calls goes to trunk2 to make the call quality bad. Mainly I want to achieve bad call quality on trunk2 by adding

Hi all, I'm trying to resolve a weird issue with SIP routing. I have a number of SIP trunks, from a selection of providers, all of which are registered in sip.conf: [general] context=default allowguest=no allowoverlap=no udpbindaddr=0.0.0.0 tcpenable=yes tcpbindaddr=0.0.0.0 transport=udp bindport=15060 srvlookup=yes allowsubscribe=yes

Hello guys. Have 2 external numbers that required registration on provider server, trunk1: 73432260005 at 80.75.132.66 trunk2: 73432260050 at 80.75.132.66 Thing is I can?t figure out how to route them to different IVRs by default Asterisk can?t match endpoint Request from '<sip:+ 73432260005 at 80.75.132.66>' failed for '80.75.132.66:5060' (callid:

Hello all, I have no problems setting up trunk groups in general, but is there a way to set up a trunk group for outbound calls that includes channels on multiple servers? I might have missed something somewhere, but I couldn't find any reading about this topic. Thanks! Sean

Is there any way to have users be able to turn on or off call forwarding at the asterisk server, so they can configure their own forwarding number and enable/disable it? Hopefully, with the added benefit that it will remain on between server reloads and restarts? I have written a hack -- a AGI script to do various checking, and if the destination is "ok" set a database variable

Hello, I want to make an agi script to match incoming DIDs with usernames. I tried to do such entry in incoming trunk. [DID_diddw] include = from-didww [from-didww] exten = 3130XXXXXXX,1,AGI("did.php") exten = 3130XXXXXXX,n,DIAL(SIP/${yup_no},20) but when i run the rule it says chan_sip.c:20152 handle_request_invite: Call from '81.85.224.41' to extension

Hi, I want to do so that extension 501 will always use trunk1 for outbound calls and 502 will use trunk2 for outboud calls. How do I do this. Right now all extensions use the same trunk for outbound calls. -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello list, I need a hand to find the best dialplan failover solution when using two SIP Trunks. My reasons to do failover are: a) one of the two providers could be unreachable b) both providers may be UP but one of them could return a SIP error message (maybe caused by DOWN E1s) Googling I found a few possible solutions: 1.

I''ve been wrestling with this all night, I''m hoping someone can help. I followed the exact steps in: http://wiki.rubyonrails.org/rails/pages/HowtoUseRailsWithSubversion ..but when I open a new ''Checkout project from SVN'' in RadRails, it opens up the second level dirs as the project dirs (ie. app, log, script, etc), leaving me with a mess of projects. I redid

Hello list, I try to setup an asterisk-server with different SIP-Peers to PSTN. The Peer are working and configured in sip.conf: [peer1] type=peer host=10.10.10.1 [peer2] type=peer host=10.10.10.2 Now dialout is no problem. Extensions.conf says: exten => _0Z.,1,Dial(SIP/49${EXTEN:1}@peer1,30) But how can I setup a failure-route if the SIP-Proxy "peer1" ist not

It gets hard to read my logs when every time someone makes a phone call it displays long pages of "Dropping voice frame". Anyone encounter this before? Asterisk is bridging two SIP lines together, so the technology should be the same. Maybe I'll try allowing only ULAW. ************************************** Asterisk Standard debug (level 3)

Hello all, I am looking for a way to restrict users from logging in two separate phones with the same authorization name/password at the same time. Meaning, I only want users to be able to place a call from one phone in one location, but have the ability to move from computer to computer. Has anyone found any sort of solution for this type scenario? Thanks, Bryan Mahin Please visit us @

Hello, I can not seem to be able to get StripMSD and Prefix to work for me in extensions.conf. This is an example of what I have: exten => _050.,1,StripMSD,1 exten => _50.,Prefix,01051 exten => _001051.,1,Dial(${TRUNK2}/${EXTEN}) exten => _001051.,2,Busy exten => _001051.,102,Busy What I want to achieve is to call 001051501657887 on TRUNK2 when dialing 0501657887. dialing

Hello all, I am working on a creating some intelligent failover dial-plan logic and I'm running into something that I'd like some feedback on. Basically, it appears that if you place a call to an IAX2 peer that refuses the connection, or is unavailable, a NOANSWER dialstatus is returned. Example: -- Executing Macro("IAX2/cubix-19",