similar to: PRI lines do not have CallerID activated yet it is

I am running into an issue with A2Billing. I will explain first of all that everything else works! the system is 90% complete its just this one small problem I am running into. So my problem is that when I place a call, 1. I dial my number that I want and A2Billing gets activated 2. it asks for my pin, upon successful entry of my pin A2Billing then 3. prompts me for my phone number then 4.

* --> SIP --> CISCO --> PRI --> PSTN The PSTN sees no callerid. *---> PRI[zaptel]--> PSTN Callerid is there... which makes me think it's the cisco, not the PRI/PSTN/telco. CISCO PRI--> * PRI [zaptel] Callerid IS there... which makes me shake my head in disbelief, because * can see clid from the cisco pri, but pstn doesn't... but when * sends info on that pri,

Thanks AJ and David, We were actually using GSM gateways by setting busy forward number on the SIMs and just giving busy signal on every incoming call, telco took care of the forwarding and the line was free within seconds. Now we need to scale up the setup but GSM gateways a very very expensive if we want to scale upto a 1000 DIDs, which means thousand SIMs and a gateway/gateways big enough.

Hey Don, How are you? I may be heading your way in the next month or so. Have to meet with a guy in Eden Prairie, and stop off at my brother/sisterm-in-law's as well. Got a question for you - with TBCT, who pays for the call once it is transferred? Still me as the owner of the trunk? Lets say I take a call that was dialled locally (caller believes this is "free"), and I do a

Hi! Its not an R specific question but had no idea where to ask elsewhere. Does anyone know the orginal reference to the CAMBERA DISTANCE? Eryk. Ps.: I knew that its an out of topic question (sorry). Can anyone reccomend a mailing list where such questions are in topic?

Hi, I have an odd problem where when a call is made to any landline phone the callerid number shows up on the caller id device with no problems. However when I call a cell phone from Sprint or Verizon it always shows up as unavaliable. I've tried multiple cell phones from each carrier. Though today I called a t-mobile phone and the callerid came through fine. Is this an * level problem

We are happy to announce that Euro LLVM 2015 is now open for registration. https://www.eventbrite.com/edit?eid=15350278095 Details at: http://llvm.org/devmtg/2015-04/ We would reccomend registering early as places are limited. Andy Thomason, Goldsmiths. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com

Hi, I have just set up Asterisk to use an E1 line with a Digium card. And I can call both in and out, but my outgoing line is all ways identifying itself as the same number, and i can't even change it to another number in the same number series. Do anyone have some clue on how to fix this. I'm using Asterisk 1.6.2.13, libpri 1.4.11.4 and DAHDI 2.4.0. /etc/dahdi/system.conf:

I''m doing some searching for deployment options, and I feel like I''m getting buried in a lot of new technology and assumptions that I know all that it''s dependent on. In the past I''ve done small things with PHP where I just dump the app in a folder and everything works out of the box. I found that everyone is using Capistrano, which relies on Subversion

Hi folks! Based upon your experience on the field what wifi sip phone would you reccomend ? A customer asked for a wireless * install and I'm looking for advice, tnx Alessio Focardi [[*] - Interconnessioni Italy -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060628/05b2fb30/attachment.htm

First posted at: http://deancollinsblog.blogspot.com/2009/04/australian-nbn-network.html You ripper, http://www.crn.com.au/News/100466,government-announces-nbn-plans.aspx This is exactly how fiber should be - a shared wholesale resource just like water to ensure retail channels can deliver value add in content and services; - Not 'outspending on infrastructure'

Hey, Can anyone answer this question. I am working with really large datasets and most of the programs I have been running take quite some time. I heard that R may be faster in Unix. I sthis true and if so can anyone reccomend which system and requirements may allow things to go faster for? Thanks!! Elizabeth Lawson --------------------------------- [[alternative

Hi there Our company is using the Linksys SPA-942 Phones, and they are pretty useless. They dont have any central management or provisioning, as well as a pretty bad interface. Can anyone reccomend any voip phones( Cisco, Polycom, SNOM ) that have * Central Management for all the phones (We dont mind if we have to buy the software to manage them) * Programable shortcut buttons, So i can

This depends on what you mean by ?not involving the service provider.? If you are literally forwarding calls that come in on the PRI back out on the PRI, the most efficient way is with Two B-Channel Transfer (TBCT). Check it out in the wiki. You need to make sure your carrier supports the feature. When you want to do a ?transfer,? you have an incoming call alerting or answered, you

I'm running a base demo install of Asterisk with ztdummy loaded on a 2Ghz Celeron with 256MB Ram - It's running on Fedora Core 2 in Text Only mode. I can connect with no issues but I'm getting intermitent popping and clicking noises in the demo playback - I've tried a variety of different codecs all with the same effect. It's the local wan so I can't see how QOS

In a multi-tenant environment, we are sending various CallerIDs outbound from asterisk based on who the user is. We have an insurance agency who would like to present a toll free callerid. This works.. unless they're calling a toll free number. In that case, occasionally, the call fails. However, should we send a correctly formatted npanxx of a local number, the call completes. We have

You require no changes to detect caller id with a x100p card in Au, however most carriers only provide cid as an extra cost option. Your most likely problem is CID is not being sent to you. If you believe you have the caller id being sent to you, Find a caller id box/phone and confirm it is there. In 99% of cases where I have seen people in Au complaining of no caller id, it was because they

My, how embarrassing. I of course meant that as a personal message to Don. But if anyone else knows the answer, I'm interested! lol Cheers, j On 03/18/2015 10:02 AM, Jeff LaCoursiere wrote: > > Hey Don, > > How are you? I may be heading your way in the next month or so. Have > to meet with a guy in Eden Prairie, and stop off at my > brother/sisterm-in-law's as

hey all, Im looking at switching from bluehost to a new provider. Mainly for Mongrel, trac and SVN support. I was hoping to get some feedback on the above mentioned hosting companies I have posted this as part of an existing ''what privider would you reccomend topid'' But have considered it and decidec it deserves its own topic. cheers, Adam -- Posted via

Hi list, This is not necessarily an asterisk issue, but a lot of you guys know way more then me, so I have a question: someone at my company sets his phone to forward calls to his cellphone, so someone calls our office, call is forwarded to his cell, and the callerID that shows up on his cell is of course our office number, because asterisk originates a new call to his cell and then bridges