similar to: different authentication requirement

Basically, I am looking to set up an extension which will be used as a "help-line". I want it to function kind of like the bat phone from the old Batman series, where Commissioner Gordon would pick up the extension in his office and it would ring the phone back at Wayne's mansion. Is there a way to duplicate this functionality with Asterisk? I just need asterisk to auto-dial an

Hi, I'm bumping on this : cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_18 make <snip> In file included from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/core.h:9, from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/avm_fritz.c:20: /usr/src/mISDN-1_1_8/include/linux/mISDNif.h:791: error: field

Hi, Before diving into this, I would very pleased to know if someone could yes or no, successfully compile mISDN 1.1.8 on Lenny (latest RC1 or beta2 version) ? Regards After a fresh install on Lenny, I can reproduce at will : apt-get install build-essential linux-headers-2.6.26-1-686 cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_8 make ....

Hi, Until now I've been using my Digium B410P cards with misdn 1.0.x. I would like to upgrade my systems and am now wondering which is the "best" route to take: - use the latest release of misdn v1 - upgrade to the latest "stable" kernel and use the built-in misdn v2 - use misdn v2 as a seperate package (disable misdn in the kernel) - use dahdi's support for misdn

Hi. I'm having problems with chan_mISDN configuration. Line "echotraining=yes" causes warning, when Asterisk is parsing misdn.conf and I'm confused why the PBX doesn't accept the setting. No matter which section I try to offer it, it is always invalid or out of range. The setting itself is supposed to be valid, it is in the sample configuration file of chan_mISDN 0.3.1.

Hello I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine. I am using the OpenVox B200P ISDN card. My problem is that even though chan_misdn module seems to be loaded correctly with Asterisk (I can see it using 'module show' command) the misdn commands are not available to me in the CLI so I cannot tell if my box is correctly interfacing with the ISDN card Any ideas

Hello, I have some problems with mISDN. I can't send or receive call from the Billion ISDN card Mi configuration files are thoose: extensions.conf: [general] static=yes writeprotect=yes [SOME] exten => 101,1,Dial(SIP/101,30,Ttm) exten => 101,2,Hangup exten => 102,1,Dial(SIP/102,30,Ttm) exten => 102,2,Hangup include => outgoing [outgoing] exten

I am trying to use misdn insted of zaphfc to drive two billion isdn cards zaphfc is ok, but the problem with cdr and the fact tha you always have to wait the bristuffed version of asterisk took me to try another way. so I downloaded the misdn installation script from beronet for the last version ( I am using asterisk stable 1.2, so now is 1.2.5) wget

A plea to all! Has anyone had any success with two or more avm fritz pci cards with either misdn, chan_misdn, or chan_capi, and any version of linux 2.6.x? I have managed to get misdn to load under 2.6.13 and detect two cards using misdn-capi and chan-capi (using capiinfo and capi info under asterisk) - but the second card/controller doesn't answer or dial calls. But if I try misdn

I have set up a * box with two hfc ISDN pci cards using mISDN both in TE mode with PmP mode. (using $MODPROBE hfcpci protocol=0x2,0x2 layermask=0xf,0xf) I have no problem dialing out by explicitly naming the mISDN port, ex: Dial(mISND/1/${EXTEN},60) or Dial(mISDN/2/${EXTEN},60) But it does NOT work when specifying the mISDN group: exten => _(outpattern),1,Dial(mISDN/g:TEmode/${EXTEN},60)

Hi list, I installed a fresh Debian/Etch with Asterisk 1.4 and Zaptel 1.4 from SVN for 2 Digium B410P card. I ran configure in Asterisk dir, went in zaptel dir and: make, make install, make b410p. Everything is ok. Now I want to compile Asterisk but can't activate the chan_misdn channel which depends on -from menuselect- isdnnet(E), misdn(E), suppserv(E) When I made the make b410p, all

Hi all, Does anybody of you have the winbond w6692 working with the mISDN/chan_misdn.so? When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1" error. The /var/log/messages file says: "MISDN free_device: entitylist not empty" I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6

Hello, I'm evaluating to possibility to use chan_misdn as a short term workaround, in case latest Dahdi is not stable enough for what we are planning to do (we wish to use Junghanns and Digium BRI hardware with Asterisk 1.6) . I've read www.mISDN.org but still have a couple of questions : 1. Is correct that in a 2.6.27 (and up) enabled kernel, the "embedded" mISDN version is

Hi, I try to compile mISDN 1_1_9_2 (kernel: 2.6.32.13). I had the following compiling error: make[1]: Entering directory `/usr/src/linux-2.6.32.13' CC [M] /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.o /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.c: In function ?mISDN_register_sysfs_obj?:

Hi, I'd like to know what's the most "popular" method for automatic fax/voice detection for incoming calls on mISDN cards such as the B410P (hfcmulti). I'm running: kernel 2.6.17 misdn 1.1.3 asterisk 1.4.21.2 B410P card I'm using iaxmodem and hylafax with asterisk (the setup works for zap channels). I've used the following options in /etc/asterisk/misdn.conf:

Hello ! I would like to get working a Fritz PCI card using chan_misdn operating in ptp mode. Afer compiling mISDN into the kernel and building chan_misdn Asterisk stops loading with : [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found UnLocking config_mutex == Registered channel type 'mISDN' (This driver enables

Hi, I have FRITZ!Card PCI card. I have installed misdn-1.1.0 on stable debian 3.1 with 2.6.8. kernel. Then I reboot system, and it doesn't boot, it stops near "Apache2 starting...". I started my system with "recovery" kernel, and tun off misd, then my system works fine. I think it's problem with memory. Has anybody debian and misdn working fine? Maybe you can

I'm using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output: Module Size Used by zaptel 178308 0 avmfritz 21388 0 mISDN_isac 14336 1 avmfritz mISDN_dsp 191424 0 l3udss1 34184 0 mISDN_l2 39040 0

Hi, I have switched a while back from chan_capi to chan_misdn. When the number is dialed and the phone is then picked up everything works just fine. Some users however FIRST pick up the phone and then start to dial... I did not get this to work with misdn. When two digits have been dialed, asterisk sees the extension as complete and does not wait for further digits. I am using an midsn NT

hi list, I'm currently trying to get Asterisk running with an HFC-compatible ISDN card (no-name product, but supposed to work with Asterisk according to the packaging). the ISDN-card is connected to a alcatel ISDN-system where it should act just like a normal ISDN-phone. I went with http://www.misdn.org/index.php/MISDN_with_Asterisk and installed the package from beronet.com including: