similar to: PGSQL application

This message is pointed directly to Steve Underwood. I tought it would not be nice to directly email him with a question that interests a good part of the Asterisk community, so here it is. :) Steve, remember a few days ago when we discussed about issues on Asterisk 1.6.1.13 and T.38 fax reception? Well I opened an issue on Mantis (https://issues.asterisk.org/view.php?id=16756) and turns out it

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny optimized for this board. Asterisk 1.6.1.12 runs fine on the

Hello everyone. I'm struggling to get T.38 faxing to work in Asterisk 1.6.1.13 with a SIP DID provider here in Brazil (GVT - Vox IP service). Here's my scenario: When faxes arrive by a specific DID, they are routed thru this simple macro: [macro-recebefax] exten => s,1,Set(DB(fax/count)=$[${DB(fax/count)} + 1]) exten => s,n,Set(FAXCOUNT=${DB(fax/count)}) exten =>

I'm having issues with T.38 on Asterisk 1.6.2.8. A few lines are received OK and then I get only garbage. I'm using ReceiveFAX() provided by app_fax to receive the faxes. After talking to the engineers on the telco, they said Asterisk is sending a REINVITE to alaw after the T.38 reception is complete, and that could be the cause of the problems. I personally am not totally convinced of

Quick and dirty question: for the TDM410P I must use the wctdm24xxp driver? Att Vin?cius Fontes Desenvolvimento Canall Tecnologia em Comunica??es Ltda.

Hello everyone. I got a little problem in here: I want to set up a queue so that if anything of these happens: a) No agents logged in b) All agents busy Then the user gets diverted somewhere. I used this (for testing purposes only, of course): exten => 7080,1,Answer() exten => 7080,n,Queue(teste) exten => 7080,n,Goto(${QUEUESTATUS}) exten => 7080,n(ERROR),NoOp(${QUEUESTATUS}) exten

Hi, I'm getting some strange behaviour on Asterisk 1.4 running on Debian Stable (Lenny). I suspect it's something to do with my setup, rather than a bug, but I'm struggling to see it, and would appreciate any input. Setup: PC with two ethernet cards: eth0 goes to local network, including two SIP phones (Aastra 9112i, wired, and Nokia E75, over WIFI); eth1 goes to router and

Hi all, I have the below extension defined under sip.conf: [2203] type=friend username=2203 secret=123456 host=192.168.0.164 mailbox=2203 context=intern canreinvite=yes dtmfmode=rfc2833 When trying to register from a softphone installed on a PC behind a nat with IP=192.168.0.164, I got 503 FOrbidden...Does anyone have any idea about what could be the issue? Regards -------------- next part

Not sure if Polycom is changing their policy or if this is an accident, but you can actually download SIP 3.1.1 right from their web site. Anyone looking for firmware should get it now before it disappears. SIP app and release notes can be found here: http://www.polycom.com/usa/en/support/voice/soundpoint_ip/soundpoint_ip450.html -Dave

Hello, I have transcoding card TC400P installed in server running Debian with Asterisk 1.4.23. Everything seams to be fine and after I boot up server I see in dmesg: 7.590966] Zapata Telephony Interface Registered on major 196 [ 7.590966] Zaptel Version: 1.4.12.1 [ 7.590966] Zaptel Echo Canceller: MG2 [ 7.610963] zttranscode: Loaded. [ 7.618969] wctc4xxp: tc400b0: Attached to

Has anyone figured this out yet? Lots of places say to add the following to sip.conf of an Asterisk 1.2 system (current production machine/Asterisk as root): tos=0xB8 (Hex B8 = Decimal 184 = Binary 10111000) or if you are running Asterisk v1.4 or newer: tos_sip=cs3 ; Sets TOS for SIP packets. tos_audio=ef ; Sets TOS for RTP audio packets. tos_video=af41 ;

hi, there is T.38 fax gateway for asterisk http://bugs.digium.com/view.php?id=12931 please test it and report bugs for people from http://www.voip-info.org/wiki-Asterisk+T.38+Bounty if you still want donate t.38 development please contact me at cervajs at fpf.slu.cz --------------------------------------- Marek Cervenka =======================================

I have a big headache. I have an Asterisk server connected to an Avaya PBX. Everything is working between those two. The problem is that I have 45 PAP2T adapters and 45 SPA3102 adapters that connect via the Internet to the Asterisk server through a Fortinet firewall. When calling from a PAP2T I get one way audio, the remote site can hear me but I cannot hear them. If I do an "rtp

Is there a way to busy out a Zap channel? I have a customer who is having problems with a line connected to a TDM800 card and we would like to busy out that line. Since that line is the head of the hunt group I cannot simply disable that channel, I need to busy the line so calls will come over the other lines. -- ?Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director

Hello everyone. I'm trying to set up a SIP DID on a customer, which uses T.38 for faxing. Voice is working great, but I never configured anything using T.38 in Asterisk so I'm kinda lost. On my googling I found out that would be best letting the Linksys SPA8000 (for those that don't know, it's identical to the PAP2 but with 8 ports instead of 2) and the telco negotiate with each

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

Good afternoon gentlemen (and ladies). A costumer of mine has many servers and each one maps their SIP extensions to the others via DUNDi. It works like a charm. SIP extensions can only register at one server, the one they "belong" to. In case one extension wants to call other that is registered in another server, DUNDi takes care of that by calling the other server using IAX2 and G.729

I'm running dahdi on the host system, and have added the /dev/dahdi/ devices to the guest vserver as recommended in Beave's "Virtual Private Asterisk" whitepaper (http://www.telephreak.org/papers/vpa/). I tried copying libtonezone.so and libtonezone.h to the guest, but I couldn't anything to replace zaptel.h in DAHDI souce (it seems dahdi.h was deprecated?). I need to

I've spent a week playing with Asterisk 1.6 and I love it. What a brilliant piece of software! Progress and learning have been reasonably good. I have external SIP provider calls coming in and have put together a little call platform and I'm stunned at the flexibility. There is one issue for me. I took me a while to click that ZAPTEL now equals Dahdi, but now I'm there I have an