similar to: 00h323 cant get gatekeeper to connect

Has anyone had any luck getting Asterisk 1.6.2.13 to register to a Tandberg Gatekeeper? The logs on the Asterisk end seem to show that the registration request is sent, and the Tandberg Gatekeeper responds. However, the response doesn't seem to be what Asterisk was expecting. Here is my ooh323.conf, followed by the relevant portion of the h323_log: [general] port = 1720 bindaddr =

All, I'm running (attempting to) ooh323 with Asterisk and a Cisco 2621XM router operating as a H.323 GateKeeper, however when I bring the Asterisk box up it registers successfully with the GateKeeper (exchanges GRQ/GCF, then RRQ/RCF) it notes the GateKeeper supports keepalive at 300 seconds, when it gets to time to re-register its sends an RRQ again and gets rejected with RRJ (unspecified

All - NEED HELP BADLY.. Using Asterisk with H323 Channels.. Everything is installed but we cannot register w/ Lucent gatekeeper. We ran ethereal and found that it was making GRQ (Gatekeeper discovery requests).. We had provided the name of the Gatekeeper (it's IP) and cannot determine why it's trying to do a GRQ. We want it to go straight into RRQ or ARQ and skip the GRQ.. Netmeeting does

Greetings to All, I hope someone has already gotten this working. I spent all day today trying to get ooh323 and gnugk to run on the same box. After a lot of tweaking to get everything compiled, I got both up and running. I can make calls IAX to H323, but cannot make calls in the reverse direction. I have tried many different configs on the GK, but always come up with the same error. It appears

Hello, I have asterisk 1.4 with ooh323c addons installed. (As I am a newbie in voip world...my question might be idiot...! ;) Please forgive me!) I succeed to make H323 call when ooh323c is configured as gateway (gatekeeper=DISABLE in ooh323.conf). When I put gatekeeper= ip_address, and add an account as follow : [aaa] type=friend username=aaa password=xxxx host=dynamic context=test

Dear list, I hope it is not a FAQ, but I searched the archives and Google, and found nothing. The question is simple : I do not understand why, starting from a symmetrical correlation matrix, heatmap produces an asymmetrical image. Best, Charles -- Charles Plessy, Ph.D. - Genome Science Laboratory The Institute for Physical and Chemical Research (RIKEN) 2-1 Hirosawa, Wako, Saitama 351-0198,

I posted previously that my Asterisk is failing to register with parent H323 gatekeeper. It appears that it is issuing a GRQ <GatekeeperDiscoveryRequest> even though I have the file <h323.conf> saying exact IP address of gatekeeper... No discovery. I'm trying to just bypass - remove the GRQ and have it Register <RRQ> Does anyone know if asterisk-oh323 will work better or

Hi, I have an ansterisk and a cisco 827-4v registered to a Gatekeeper. asterisk has two extensions: exten => 223,1,Dial,OH323/BYEXTENSION@827PD exten => 730,1,Dial(IAX/eduardo@10.0.11.103) (IAX are working well) When I try to call each other, gnugk shows a ARJ: ARJ|10.0.11.112:1720|223:dialedDigits|730:dialedDigits|false|resourceUnavailable I think this could be a codec

Hello All, I have managed to get my cisco and asterisk able to talk to one another I think. But cannot make a call from a phone behind call manager to the asterisk server. I have followed the cisco asterisk integration on the wiki. I have also setup a number 3000 for dialing for current local time and date on asterisk. I can call from a sip phone behind asterisk, no problems. The problem

Hello! I am producing a set of images and I would like them to be sorted by names I give. I was able to produce my names and add integer to them. That is easy. But my problem lies in sort of file from this process: figure_10.png figure_11.png figure_12.png ... figure_1.png figure_20.png ... So I would like to convert integers to something like 01 if upper limit for this conert is 10 or 001

Hi, I am wondering if there is a way to change the value of the "record" option in a graphics device that is already open (and accepts this option). I don''t want to open a new device with, for example "dev.new(record=T)", but just want to change the settings of the current device. This can be done by pointing and clicking on the "history" tab of a

Hi ! I'd like to create a vector that has this kind of numeration 001 002 003 . . . 099 I have looked at format help page but couldn't get any hint on how to do it. Thanks Anna Anna Freni Sterrantino Ph.D Student Department of Statistics University of Bologna, Italy via Belle Arti 41, 40124 BO. [[alternative HTML version deleted]]

Hello again. I'm stll struggling trying to terminate calls from SIP through Asterisk and throught my H323 gateways... Basically the call is accepted by GnuGK but then dropped with *reason = unreachableDestination <<null>>* I did a *debug trc 10* on GnuGK and looked at the sessions... one from X-Lite through Asterisk... and one from OpenPhone... The one from OpenPhone works

Hi, I'm trying to configure Asterisk as SIP-H.323 Gateway via ooh323, but I have an error relatively to the GK Confirmation message. >From the log: "H323 RAS channel creation - succesful Sent GRQ message Gatekeeper Confirmed (GCF) message received ERROR:No Gatekeeper ID present in received GKconfirmed message Ignoring message and will retransmit GRQ after timeout Error: Failed to

Below is a cut and past from my log files that are sent to me. This is from the last day that proftpd worked correctly. I'm not sure why proftpd was restarted as the log states: ################### LogWatch 5.2.2 (06/23/04) #################### Processing Initiated: Sun Feb 19 09:02:02 2006 Date Range Processed: yesterday Detail Level of Output: 0 Logfiles

--------------------------------------------------------------------- Red Hat, Inc. Security Advisory Synopsis: Updated mailx and perl packages are now available. Advisory ID: RHSA-2000:048-06 Issue date: 2000-08-07 Updated on: 2000-08-09 Product: Red Hat Linux Keywords: perl suidperl mailx rpm Cross references: RHSA-2000:051

Thanks for the help, with the apcsmart-old driver it works again! Didn't notice my UPS is now so "old" ;-) Here is the output of upsc with apcsmart-old driver: battery.alarm.threshold: 0 battery.charge: 100.0 battery.charge.restart: 00 battery.date: 11/22/06 battery.packs: 001 battery.packs.bad: 000 battery.runtime: 540 battery.runtime.low: 120 battery.voltage: 53.73

Hi there. I have a short .ogg with Vorbis stream @56kbps from a 44.1 16bits stereo sample, which weights exactly 135'781 bytes. Packed to ZIP, it goes down to 109'485 bytes, that's a 80% ratio ! Even worse with latest RAR3 archive, with which the file size goes to 104'349 (76%). <sceptical> I admit this sample is a bit repetitive, but I guess the probability of having the

Hi all, I would like to call from SIP client to Asterisk then GnuGk, then Cisco 5300 to PSTN phone. Is this possible? I need simple config asterisk and gnugk.Can somebody help me? Ganbaa -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040629/cfe09e1e/attachment.htm

hi netters I have a rather simple question. I have a data frame with two variables X and Y, both of which are factors. X has 100 levels while Y has 10 levels only. The data frame has 100 rows in all, so for X the values are unique, and Y has many replicate values. Now I wanna reduce the data frame into 10 rows only, according to the 10 levels of Y. I don't care which value of X is in