similar to: Asterisk SMDI for Nortel Option 11

Anyone interfaced * to the Nortel option 61c pbx via T1's, pri, etc? Need to begin planning the implementation, purchase cards, etc. Any recommended approaches, configuration problems, etc? Off-list is fine if you'd like. Rich radamson @ routers . com

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

I am trying to integrate a Nortel Norstar system with an Asterisk service using a TDM04B card (4 fxo). So far everyting works from Asterisk to Nortel. The problem is when someone dials from the Nortel PBX to the Asterisk server. Asterisk answers the call and provides a dialtone (with DISA) but appartently the DTMF tones are not passed to asterisk and the call cannot proceed. This only

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 186 bytes Desc: OpenPGP digital signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20061103/b35592e2/signature.pgp

Hello to all, I have a problem with an asterisk qsig. I have three machines: Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk---> Asterisk I use Snom phones on Asterisk. If I call from Asterisk to Nortel, Nortel reminds me of the name of the person i'm calling and I visualize on the display of Snom phone, but if I call from Nortel to Asterisk, the QSIG does not send

Well I am entering into a realm that I don't know. 3 sites with Asterisk 1 site with Nortel Asterisk/Sip calls working fine between the 3 sites. Asterisk to Nortel set calls working fine. (call comes from asterisk to nortel and rings telephone, people answer and talk happens, hangup call clears) Nortel to Asterisk. Set on Nortel gets a busy signal. Any suggestions on what to look

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

Has anyone had any luck getting an asterisk box to talk to a Nortel C15K softswitch? Or any Nortel "sip" products? I've been playing with it for several days and can't seem to pass calls either direction. I know that whike the Nortel says the C15K speaks SIP, it really speaks nortel's implementation of SIP, but I thought I could get it to at least pass simple calls back

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

I am using asterisk 1.4.32 and wish to connect using SIP to a nortel 1000 switch with the ability to have 90 calls at a one time outgoing or incoming. the nortel reseller is asking me what to do. I dont know nortel at all. I thought I just needed a "SIP trunk and IP address of the their server and an account name, and provide her my IP address". They didn't know what to do with

Hello all, I have Asterisk 1.2.1 and a TE110P connected to a Nortel Meridian Option 81C system. The PRI line is currently setup as DMS100. Here are the relevant lines from zaptel.conf and zapata.conf: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone = us zapata.conf: [channels] language=en context=from-internal musiconhold=default switchtype=dms100

I am the one that placed the bounty. After it being there for 2 months and getting no takers (and very few if any people asking about it), we are almost finished writing it in house. I'll keep the bounty up untill we do finish our product so if anyone beats us to getting it working they'll get paid... W. Kevin Hunt CCIE #11841 MCSE, Linux+ SME www.huntbrothers.com >

folk, I see from the archives that the issue of nortel handsets not sending dtmf tones to asterisk has been discussed a couple of times, but there is something I quite havent seen answered yet. Is this dtmf issue a problem with the nortel handsets or the PBX itself? If the handset were changed to another one, would this issue be solved? Or must the PBX be changed completely? rgds eb

Hey All, I have an Asterisk box connected to a Nortel Option 11C via a T1. In the Asterisk box we have a Sangoma A101C and in the Nortel we have a TMDI card. The Nortel is also hooked to the PSTN via a T1 on a different NTAK09 PRI card. I've included the Zapata.conf and zaptel.conf files below. Our issue is that when a call is sent over the tie line between the two systems, the audio on the

Hi. I had successful confiured my Asterix PBX, but now I need to connect it to a Nortel Meridian phone plant, I got a Digium T100P on the machine I got the Asterisk and I already connect it with the phone plant, I need to know what configuration do I have to do so the ip extensions can make calls to the extensions of my plant Nortel. And extensions from the Nortel plant can call ip extensions of

Hi, I have asterisk running a single T1 card with a connection to a nortel CS 1000. All calls to extensions, local and long distance are working just fine. My issue is this: The nortel CS 1000 supports connections to and intercom system that is just line level audio to speakers. When my PRI tries to call this "extension" it is never answered so my AGI never runs to play a message

Anyone get the Nortel 1140E phones working with Asterisk ? These look like great phones and I would like to start using them on our deployments. I know these will work with Asterisk but the sample config files are hard to find. My next step, if I cant find anything on this list is to purchase a Nortel Communication Server for testing. If anyone has a used NCS that works with these phone via SIP

Is anybody using Nortel IP Phone? I have (second hand) Nortel i2002 phone and when it boots I get: DHCP server unreachable F/W version: 0604D9C My setting: DHCP? [0-No, 1-Yes]: 1 DHCP: 0-Full, 1-Partial: 0 Can any body suggest how to troubleshoot it? -- #Joseph GPG KeyID: ED0E1FB7

Has anyone fed a Nortel BCM from Asterisk? I'm interested in switching our company over, but don't want to replace all the handsets in one fell swoop. I imagine some of the PRI cards can "emulate" a switch? I'd still like to pass CallerID into the Nortel, etc but all the external traffic would be VOIP, not TDM.

Hello: I've been wrestling with an integration issue for which there also seems to be one piece missing. I'm hoping someone on this list can help. Due to a complete lack of cooperation from our current voice provider we are in need of an alternative way to access our Octel 350 voicemail system from our SIP (SER) proxy. I can redirect and relay calls to numerous destinations via