similar to: Having problems with BLF

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

Hello, I'm trying to supervise an existing Voicemail box with a BLF button on Debian's asterisk 13.14.1 system. I mostly found this [1] document. I added in a context a line like: exten = *7000,hint,MWI:31 at default With "core show hints", I can read this: *7000 at subs : MWI:31 at default State:Unavailable Presence:not_set Watchers 1 My questions

I have meetme working with BLF on polycom phones however when meetme is not actually being used by anyone the 'status' of meetme becomes "idle". Which the Polycom phone sees and produces a clock symbol and FLASHING red LED. Are there any 'tricks' or work-arounds to change this status to something that does not blink the phone's LED making it look busy when meetme is

Hi, 1. How do you then, synced then unread message presence with custom device status ? From an external program ? When a user leaves VoiceMailMan application ? Using externnotify ? 2. What is MWI:101 at default expression for (see [2] ? Cheers [2] https://wiki.freepbx.org/display/FPG/Subscribe+a+BLF+button+to+Monitor+a+Voicemail+Box 2017-11-21 17:58 GMT+01:00 John Kiniston <johnkiniston at

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone.

Ishfaq Malik <ish at pack-net.co.uk> schrieb: > BLF is an interaction between the phones and the server. You need to > configure function buttons on the phones to display the presence state of > individual peers that have been set up on the server. > > This command in the asterisk cli will help you: > > core show hints > > If you see an entry for the peer then

I am trying to set up the BLF on a GXP2000. Currently what I have is extensions.conf: [globals] polycom430=SIP/101 [internal] exten => 101,1,Macro(voicemail,${polycom430}) [macro-voicemail] exten => s,1,Dial(${ARG1},10,tT) exten => s,2,VoiceMail(u${MACRO_EXTEN}@default ) exten => s,102,VoiceMail(b${MACRO_EXTEN}@default) [ext-local-custom] exten => 101,hint,${polycom430}

Struggling with an IP650 and 7 IP335s this morning. I have the following hints defined (courtesy of FreePBX 2.9): extensions_additional.conf:exten => 300,hint,SIP/300 extensions_additional.conf:exten => 301,hint,SIP/301 extensions_additional.conf:exten => 302,hint,SIP/302 extensions_additional.conf:exten => 303,hint,SIP/303 extensions_additional.conf:exten => 304,hint,SIP/304

Hello Asterisk community, I'm trying to use BLF with Asterisk Realtime, i've been searching for some info but nothing seems to be clear, can anyone help me eith some ideas to make this work ok? I'va my dialplan with Realtime Thanks in advance -- Saludos Danny Dias SkypeID: danny.dias1

Hello Asterisk-Community, I'm having an error with my BLF configuration on my asterisk...i've configured the sip peer like this: [8250] type=friend callerid=Extensi?n 8250 <8250> canreinvite=no context=pbx9 dtmfmode=rfc2833 host=dynamic insecure=no language=es nat=yes pickupgroup= callgroup= qualify=2000 secret=cyx2mo type=friend username=8250 subscribecontext=pbx9 call-limit=100

Would anyone happen to have some examples of polycom configs, specifically the 650 with sidecar for blf. I have the asterisk side all configured since I've set up blf with other types of phones, but I'm missing the polycom side. I've put together a <mac>-directory.xml, and the sidecar now lists numbers as speed dials but does not subscribe to blf.

Greetings all. First off, thank you for your time on this. I have spent literally 12 hours searching every forum and article I can find, and I'm going cross-eyed, so I need to bother everyone with this. I am running * 1.2.37, and I am trying to get the hints working, so I can turn one of my SPA962's LED's red when someone parks a call. I have used Button #3 on my SPA962 to

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

Hi The blf-crypt password schema mentioned in the docs could be a solution to my auth problem. However, the docs state that actual support depends on the glibc. Mine apparently doesn't. Does support depend on the glibc's version (mine is 2.15-r2)? Maybe someone with access to a box with a good enough glibc could do the following and post the hash for the plain password "test"?

Is there anyway to "spoof" a BLF signal to a phone from within a dialplan? That being so I can turn a BLF light on or off on a phone when a certain thing happens in a dialplan?

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL: