similar to: Compatible IP Phones for Asterisk

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

Has anyone come up with a clever way of indicating DND is activated? I've thought of stutter dial tone and using the mwi, but have no idea how to implement these. I'm using Budgetones. My concern is that users will activate the DND, then forget about it not realizing that they are not receiving calls. Thanks, G

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040106/3efdeb9f/attachment.htm -------------- next part -------------- Hello Though my SNOM 200 phone receive a voice mail but it doesn't show MWI on the LCD panel, Instead it keeps displaying "DND SW-REG,Call-log". Though I can access my voicemail using exten

Hi all, I playing around with some C7912 IP phones (SIP FW). They work nice with asterisk, but I found the following issue: o When I configure the voicemail number (8500) to access VM I can push the "messages" button on the phone to access my VM o The phone can setup DND and call redirection on NA and BUSY o MWI is also working fine ;-) But in this case the call will be

I am proud to announce that I have just released a brand new IPSwitchBoard totally rewritten from scratch. The new version has been built on the experiences gained by the previous versions. Download for FREE: http://ipsoftware.thorben.dk IPSwitchBoard is totally customizable and will give you, among other things: Unattended/attended transfers. Park calls and retrieve/forward them again.

I have been working on solving a major issue with IPSwitchBoard. It was reported that IPS would use all available memory and get the PC to grind to a halt. I could not understand this as I had it running on many different PC's in Denmark. I now found the bug: IPS would crash on any PC that had "." configured as decimal point (in Denmark we use ",") this meant

Hi, I've noticed that when I set a phone on DND (phone-side DND, meaning it rejects calls with a busy status, SIP 486 response code I believe) the queue keeps on trying the phone over and over again. This creates issues in terms of CDR entries - in a scenario where there is only one phone on DND, and a delay between attempts of 1 second, the queue will attempt to ring the single phone

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

Hi all, When moving from a self compiled Asterisk 13.23.1 to Asterisk 13.24.0, has resulted in a MWI clearing delay of around 5 minutes. After listening to a voicemail and deleting it, the Polycom VVX 601's MWI light is left on for around five minutes, before clearing. Installing Asterisk 13.24.1 did not fix this. Moving back to 13.23.1 allows the MWI to clear immediately. I see a note in

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

I would like to have my ip phone list a menu with different status on it. for example, i could have button on the phone named status. when the button is pressed a list would display on the screen like 1:dnd, 2:break, 3:lunch, etc. we use aastra 57i phones. It looks like i could use xml some way to customize the phone. Also how can i dynamiclly pull the extension so I don't have to cusomize

Hi all, I'm having sudden MWI problems. Everything else on the phone works fine though. I have three Cisco 7940s. Asterisk server is behind a firewall running NAT. (192.168.1.202/24) Phone #1 - On the same subnet 192.168.1.250. Everything works great. Phone #2 - On a different subnet, 192.168.2.0/24. Everything works fine except the MWI. It never comes on. This is over an IPSEC VPN, but

Hello, I have BLF working on Snom phones. Ringing state (blinking) or "on the phone" state (solid) are working well. So the buttons are configured as "BLF" in the Snom webinterface. Now I would like to add another state for unavailable or dnd. In fact I would like to turn the LED red in the case the phone is not registered or the user pushed the DND button. So I though

Victor Hoodicoff wrote: > > > I think your impressions of Aastra are outdated. Install the latest > firmware, download the latest documentation and test and THEN give an > opinion! Did you miss the part when I wrote I have Asstras sitting on my desk collecting dust. I program on average about 5 per month, deal with about 40+ per day. They're as impressive as that Hyundai in

I'm trying to keep the DND status of my Snom phones and the astdb in line but I'm stuck on integrating my gui DND button which talks to * using the manager interface (actually it uses Astmanproxy as the gui host is on a different network to asterisk and can't see the Snom's across the network). All's working fine in my Dialplan; when someone dials the code for DND-on or

I'm having an issue with call park on my new Linksys 922. It has soft menu keys for doing call transfer (which I always think is a good idea because it's amazing how every phone has a different xfer interface and people always get confused). However, I can't get a good call park working on it. It doesn't respond to the use of "#" for transfer (nor should I want it to,

On my 7905s I can configure a "voicemail" number, which in turn activates a "Messages" softkey. When pressed, it goes to that exten, which in turn is configured to go to VoiceMailMain. Great, works like a charm. However, the phones also have a "go to voicemail timeout" after which, the phone diverts the call to voicemail via a "temporarily moved". This

Hi all This question is not connected directly wiht Asterisk but I didn't find another place. Sorry, I would like to determine state of UA ( DND, forward calls turned on my remote sip phones.) Which tools should I use ? sipsak ? maybe something else. When I send options method to remote sip phones I always receive SIP/2.0 200 OK response regardless of activated call features (DND, forward)

Hi, Is there a way to poll the DND status of a Linksys SPA9xx/5xx phone? The reason I ask is that I'm trying to implement DND + BLF on asterisk. However, the DND softkey on the Linksys phone does not send any feature codes to asterisk. On the flip side, if you disable the Vertical Activation Codes on the phone, then dialing the feature code doesn't display 'Do Not Disturb' on the

> thanks, using your example, and this url: > http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0 9186a00800dea82.shtml <http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note 09186a00800dea82.shtml> > I got it to work... then I realized that there's no way the SIP phone > on asterisk is going to get the MWI ( message waiting