similar to: SPA941 WMI not lighting up when natted

Hi, I'm experiencing the same problem. We have 2 office locations and the Asterisk server is at one of them. At the other location, all SPA941 access the Asterisk server over an Internet link. All phones are set to "nat=yes" at the remote location. So my problem is that the MWI doesn't work at the remote location. The Sipsak messages are sent properly, but it's sent to the

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

Dear Group, I have just purchased two Linksys SPA941 and flashed these to the latest firmware. Everything works well except for the Hold button? Has anyone else experienced the same issue? What was the solution? Kind Regards Shad Mortazavi

Hi all, I'm new to this list, so forgive me if I'm not supposed to ask this: I currently own a Linksys SPA941 SIP phone with 5.1.8 firmware. Is there any way to use TLS with this phone<--->asterisk (v 1.6.0.9)? It is said that is supports TLS/SRTP but I don't see any of these options in the configuration file or the admin (advanced) SIP conf panel. Am I missing something? Thnx

Hi I have a big problems on my Asterisk systems : I have one Asterisk Server with static IP (no nat) and 6 Linksys SPA941. All SPA are after a router with NAT: * SPA-1 and SPA-2 are on the same network, we have a pat 5060 => SPA-1 and 5061=> SPA-2 on the internet router * SPA-3, we have a pat 5062 => SPA-3 * SPA-4, we have a pat 5063 =>

Hello list, I got a couple of those "wouldn't it be great questions", as following: 1. Is it possible, with asterisk to hold a central phonebook directory of callers?, so that when this party calls a "textual" caller ID will be displayed on the phone display. 2. How can this be configured with Trixbox, I've looked at the configuration options - I assume it plays no

Have a 2003 server located outside of the Domain network over a VPN. The server originally existed inside the network (10.1.1.0/24) but now exists on 10.10.12.0/24. I can access shares over the VPN to the domain controller, but when I try to log in as a domain user it says the domain is unavailable. I added the domain controller as a WINS server on the 2003 server. nbtstat -c on the 2003 does

To get MeetMe working properly, I know some sort of timing device provided by the zaptel package is required (even if it means the zt_dummy). But, on a virtual machine I know that the Linux timing won't work as expected. Is it possible to then dedicate a physical device like a USB port or something to the virtual machine to use for the timing interrupts? Thanks.

Hi all, i know this question is not directly asterisk related - but i have no idea where else to ask. We do have around 50 pieces of LinkSys SPA941 - these phones do have a 2.5mm plug connection - and we do have many many headsets we used with normal PC's before (so 2x3.5mm plug connection). Does anyone here know where i can get an adapter 1x2.5mm -> 2x3.5mm ? Or can anyone here tell me

Hello, Yesterday night we have upgraded our Asterisk from 1.2.32 to 1.4.24.1 with lipbri 1.4.10, dahdi-linux-2.2.0-rc4 and dahdi-tools-2.2.0-rc2. Libpri and dahdi is only for dahdi dummy cause of the meetme function. After the upgrade we had the problem that some Linksys spa941 phone at one location could not dial out. incoming calls to the phones works without any problem, but outbound the

Hi all. The SPA941 and friends have pretty multicoloured LEDs, but there doesn't appear to be any support for SUBSCRIBE/NOTIFY as * as implemented for extension hinting. Has anyone managed to get the phone to support this? Thanks! -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 -------------- next

Appearently SPA941 is less than a SPA942 without two ports, poe and backlight. There is less features too, it doesn't support BLF. Is it possible to hack 942-software into 941, or is there another workaround? Leif -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091112/0a6cbf82/attachment.htm

Hi, i'm trying to get GPO result info from a remote computer but i get an error "RPC server is not avaible". Is supported by samba 4.2.1? if i try to get the same info from local is working, and i've checked the WMI security on remote computer and is OK. Thanks!!

Hello everyone, I've been trying to use wmi-client but without success. I'm really like to resolve this issue, I decided to ask for directions to get data from Windows servers without the need to install a client. Thinking about it, I wonder how is the WMI support in samba. Another point: You can ask questions about wmi-client in this list? I say this because the mistakes that I

Hello WINE friends, I am a WINE newbie seeking your help with WMI installation So far I have done the following - 1. installed wine-1.1.43 on SUSE 11.2 2. replaced wine's winsxs with my system's [XP] winsxs 3. replaced system32/ dlls except the ntdll, kernel32, user32 & gdi32 dlls with my system's After this, when I try installing WMI (as stated below), I get into access

Hi List, Just loaded our favorite OS onto my new ASUS laptop. Practically everything worked out of the box - I used the live DVD to check things out and installed from there. I have followed http://forum.notebookreview.com/asus-gaming-notebook-forum/553474-g73-asus-wmi-linux-driver-i-need-your-help-6.html to get suspend working and also to get function keys working for LCD screen backlight

Hi, After some googling I've found that there's very little said about the possibility of using WMI from Wine. Has someone done any progress about it? I find this subject very important; if you feel interested here's why: One may think this is a somehow fanciful intention, after all WMI exists for the purpouse of administering Windows, and no doubt that's best done from

GPO that fails .. check if you did set the option. Always wait for the network at computer startup and logon.. read : https://technet.microsoft.com/en-us/magazine/gg486839.aspx greetz, Louis >-----Oorspronkelijk bericht----- >Van: danielmadrid19 at gmail.com >[mailto:samba-bounces at lists.samba.org] Namens Daniel Carrasco Mar?n >Verzonden: donderdag 21 mei 2015 15:30

Background: As of Windows 10 version 2004, the wmic client no longer works. It gets the following error - [wmi/wmic.c:196:main()] ERROR: Login to remote object. NTSTATUS: NT code 0x80010111 - NT code 0x80010111 This seems to be an RPC header error. Presumably Microsoft changed something that broke wmic. Since I found wmic.c in the samba source I thought that it might be able to be compiled as

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have been working on a Kix script to automatically change the workstation name and join the workstation to the domain. I have written most of the script (which works quite nicely) except the joining to the domain part. I have been using WMI classes to change the worksation name, and was hoping to do the same with the domain join. The