similar to: asterisk dahdi fax problem

Hi, I have a B400P BRI card with point-to-point connection (signalling: bri_cpe) with this dmesg: http://pastebin.com/sXrRt1yM When i restart asterisk server, the card cannot connect to the telco, the control led flashes red. If I unplug the cable between the ISDN nt and the card and wait 40 sec, the card can connect and works properly. The telco says the asterisk crashes the connection

Hi, I have a B410P card with bri_cpe signalling and two Openvox analog card (A1200p, A800P) with fxo_ks signalling. From the ISDN we have Point-Point 10 connection with a 10 public phone number range. If I receive a public call, the asterisk recevies the last two digit from this range, so it works, I can receive all the 10 numbers. If I'd like to dial from an exten which I have to

Hi, I need a feature from asterisk with dahdi channels, if there is an incoming call, it should ring on several dahdi channels. My channels look like: OFFICE1=DAHDI/13,,rtT OFFICE2=DAHDI/14,,rtT If I add this line: exten => 12345678,1,Dial(${OFFICE1}&{OFFICE2}) only OFFICE1 rings. If I change it to exten => 12345678,1,Dial(DAHDI/13&DAHDI/14) DAHDI/13 and 14 rings together,

Hi all. I'm in the process of configuring a phone system for my family and friends. I'm wondering if I should try to implement the "Vertical Services" (http://www.nanpa.com/number_resource_info/vsc_assign) in the Asterisk dialplan, or if I should delegate those functions to the various ATA's. For example, the Sipura SPA 2002 can handle*69 internally. On the other

Hello, I got Quintum A800 with the P5-2-1 firmware. I configure my asterisk trunk as followed: [SIP_BD1] type=peer qualify=yes host=192.168.0.254 disallow=all context=from-pstn allow=h723 and inside the quantum I change the config sip useragent to 5060. Up to this part if I run sip show peers, I got: asterisk1*CLI> sip show peers Name/username????????????? Host??????????? Dyn Nat ACL

Hello, I am having problems, getting my asterisk-domU to work properly. It consists of the following components: - Debian Etch under Xen-3.1 with a 2.6.18-kernel - Asterisk 1.2.24 - mISDN-1.1.5 I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in permissive mode. This is working fine. The strange problem is, that the two HFC-ISDN-cards are not beeing initialized by the

hi, maybe someone out there already has some experience and can help me. I have just ordered an E100P card from Digium, I already have a basic asterisk setup up & running. My application is the following : I want to accept incoming calls from the PSTN to Asterisk, and without asking anything of the client just pass them immediately to a call gateway in USA, actually we are planning to use

Hi Guys, I am not so familiar with asterisk and hope to get help here. I am having now some stupid errors. My goal for the first, is to create a simple pbx with different context. As long as I use only the contex 'default' everything seems to work perfect. Now I tried to add another context i.e 'internal' and the asterisk is complaining for not finding the required extension in

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

I've been searching this lists archives and using the Googles for two days now, and keep coming across the same messages from before 2012 with the errors I'm getting, so either I'm seeing something new, or I've missed something stupid. I've been following the HOWTOs here from Samba.org. In each case below, I uninstalled the provided Samba packages and built from source.

hi everybody a windows kvm guest would not start, process gets killed with: Out of memory: Kill process 21984 (qemu-kvm) score 44 or sacrifice child I really don't know where/what I might be missing, config seems fine, everything looks ok - I only am not sure, do I need to first stub a SR-IOV device like regular passthrough? I'm trying sr-iov, having one NIC left to the host and the

Hi list, We're trying to set up a phone number that customers can call to get a hold of anyone of a group of sysadmins (and not their voice mails!). We found the findme example ([1]) that makes the callees press 1 to accept the call. It almost works, but it doesn't work correctly when one of the callees, the sysadmins, hangs up after accepting the call. We're using this

Hi all. I'm looking to change from a standard telephone line to a VoIP phone line at home. I'm looking for recommendations for VoIP providers that I can use with Asterisk. One of the catches is that I often telecommute and sometimes I do some side business; these practices violate many provider's acceptable use policies. So, I need a provider who doesn't care how I use the

I am trying to set up a Grandstream GXV-3000 Video phone to Asterisk ver 1.2.21.1. The problem I'm having is that it can call other SIP phones, but not vice versa. Can someone tell me where is the problem? TIA! Here's part of my configurations: ---------- sip.conf ---------- ; 113 is the Grandstream phone [113] type=friend username=113 secret=secret context=default dtmfmode = rfc2833

Hi, I've got some weird sound artifacts happening during calls, they're very hard to describe, so I have a 122kb recording: http://openprojects.rarcoa.com/~miztic/artifact.wav normally the artifacts are just short blips, not quite as long as the one above, but they sound the same. When using the aggressive echo suppressor, it seems like those artifacts cause a really loud buzzing sound to

I just upgrade quintum A800 with new SIP firmware ---------- Product Name: Tenor Analog A800 Multipath Switch - 8 ports (Rev. B) Gatekeeper Status: Mini GK Calls Allowed: 8 Feature Bit Status: -PS/+RB/-ER Languages allowed: 1 Serial Number: A002-00308F Ethernet Address: 00-30-E1-00-30-8F IP Address: 10.101.0.10 Subnet Mask: 255.255.255.0 Default Gateway: 10.101.0.1 System Software Version:

Hello, I have previously open a topic on the mailing list about deadlocking on Asterisk 1.2.35. After upgrading to 1.4.29.1 we still experienced the same problem : Mar 5 12:05:56] DEBUG[8647] channel.c: Avoiding initial deadlock for channel '0xb7689840' [Mar 5 12:06:41] DEBUG[7130] channel.c: Avoiding deadlock for channel '0xb7c04788' [Mar 5 12:06:41] DEBUG[7130]

I have Asterisk running with a combination of SIP and H323 clients. I am using the OH323 module instead of the H323 one. When the SIP clients ring each other, they can hear a ringing noise in the ear peice to let them know that the other parties phone is ringing. However, when the H323 client rings a SIP client, there is no ringing sound at all, although as soon as the called party picks up the

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

Hi all, I am having trouble setting the signalling method for the B410P using DAHDI. Asterisk complains that it has never heard of 'bri_cpe' or 'bri_net' - but it doesn't mind having 'pri_cpe' etc. ERROR[4294]: chan_dahdi.c:11327 process_dahdi: Unknown signalling method 'bri_net' Dahdi - dahdi-linux-complete-2.1.0.4+2.1.0.2 Asterisk - 1.4.23.1 Libpri - 1.4.9