similar to: parked calls

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

Hi list, Can someone please explain how to get one touch recording (automon) to work reliably? I'm using Asterisk 1.4.14 on a Debian etch system. My current configuration includes the following settings: In /etc/asterisk/sip.conf: [2000] ; Siemens Gigaset S675 IP wireless SIP phone. type=friend secret=1234 context=phones-j dtmfmode=rfc2833 qualify=yes

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

Greetings all, I'm trying to connect to an AT&T teleconference, but the call is never marked as ANSWERED by asterisk and therefore won't bridge and continue. The only work-around I've come up with so far is to dial like this: Exten => 744,1,Dial(Zap/g1,,p) The "private" mode keeps the line open without trying to do a bridge, but requires the

Using a Polycom 550 and 650 phones on my Asterisk server for testing. I can't figure out why the volume is so low. How can I adjust the volume control on Asterisk? It's at max on the handset phones. Thanks! Hin

When I try to make attendend transfer (*2) this what hapends. I press *2 other person goes on hold and I hear "transfer". I press extension number and that extension starts to ring but I don't hear anything. If nobody picks up that phone call in few seconds I get back to the person I was talking to (the person I triesd to transfer). The problem is that again, I don't hear

Title says it all - for the time being I am stuck deploying Asterisk in ESXi . We are also looking at Proxmox for our next round of servers.. Everything works fine except conference calls - very stuttery , have tried a few different codecs. I assume this is a granular clocking issue , and wondering if anyone has anything I could try to fix or mitigate the problem in ESXi environment . We have

Hi, I have a strange problem with all of our Polycom 550 & 650 phones. I am running a TFTP server on my Asterisk server and option 66 Boot Host pointing to Asterisk on my DHCP server. The auto-provisioning is working because the phones are registering correctly with their extension. If I change the MAC.cfg file to another extension and reboot the phone, it will reflect the new ext. The

Hi list, This wll be my first post, so I want to thank all the developers for the great product they have created. Now, the question, I have installed asterisk 1.05 on debian sarge (binary package) with an I4l modem and 4 x-lite softphone and 2 SIP hardphones (Yuxin 100) This all works fine, exept for som echo on the ISDN channel, but I'll replace the I4L card with an AVM-C4 card next

I need to setup MWI on a few Aastra 9112's. I've tried doing so in the web interface by setting "Explicit MWI Subscription" to true, but no lights, no stutter tone. Firmware: 1.4.0.1048 Thanks! -- Warm Regards, Lee

Hi all, we have just upgraded from Asterisk 11 to Asterisk 16. After porting all the config to 16 we figured out some major load problems. the majority running of our Asterisk instances is still having Asterisk 11 so we can compare load handling on both versions. On the same hardware configuration we see load differences that Asterisk 16 takes four times the load as Asterisk 11 (on 11 we see

Hi, Been playing with Call parking, and I can`t help but wonder if I am doing something incorrectly. The way I understand it (using default config in features.conf), is I would transfer a call to extension 700, which would park the call, tell me "701". I could then hang up, go fetch the fright person and tell him "call 701 you have a call waiting for you". The way I

Whenever I try to drag calls to the Parking Lot or On Hold, FOP would drop my calls. I have searched online and have found similar problem, such as the link below. I have tried their solution but still the FOP is not working correctly. I even installed the HUDLite server and is getting the same results. www.freepbx.org/forum/freepbx/users/flas...ot-transfering-calls Here is the log when I tried

Hi, I try to set up attended transfer in my Asterisk Box . My features.conf look like this: [general] parkext => 100 parkpos => 1-5 context => parkedcalls parkingtime => 100 transferdigittimeout => 3l courtesytone = beep xfersound = beep xferfailsound = invalid featuredigittimeout = 500 ;adsipark = yes pickupexten = *8 [featuremap] atxfer => *2 blindxfer => # disconnect

I'm trying to get call parking to work, but I've run out of things to try. I can place a call between two internal extensions, then on one extension transfer the call to extension 700, and the call gets parked on 701 but I don't hear the extension number when I do the transfer. I can hangup and call 701 and get the call back. Here's what I see: (comments added on lines starting

I thought it was quite easy to implement but I cannot get one-touch recording to work. Here are the changes what I did: I restarted Asterisk after the change (because reload does not work for changes in features.conf). I press *1 on the Polycom IP600 phone to record a conversation but no new wav file appear in /var/spool/asterisk/monitor or elsewhere. Any suggestions? Here is the console log:

I would like to hire someone to help us tweak our asterisk system for Snom phones. We would like to enable things like: One touch recording One touch park orbits Presence Please contact off-list if you will be able to help. Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have written an application (win32) to view parked calls. The reason i wrote the code is because my GS doesnt support the system reading the parked extension back to me after I park it. This will allow you to view where the call is parked, the caller id and when it was parked there. You can configure it to show parked calls parked by anyone or set it to a specific Device. If you put

Hey All, I am working on a SIP Call bridging application. Every time I receive a incoming call in Asteriskserver1 my AGI should alert to AsteriskServer2 and AsteriskServer2 should callback to AsteriskServer1 and call should be bridged on specified extension. (making call in this way is customer requirement) Every time I receive a call in AsteriskServer1, I Park the call and through AGI,