similar to: Semi-Transfer

Alright I've been having an issue when trying to dial out locally when coming from SIP. This used to work no problem, now it doesn't. Now the local PRI to Bell Is working fine I have calls coming in and out of it constantly right now. BUT if I try and make a local call from SIP (from X-Lite or one of our Linksys SPA2102s) It fails every time with errors like these == Using SIP RTP

Other than having stripping out IPs this is what I am receiving for my voip calls. Now I normally use ${CALLERID(rdnis) for RDNIS, this works fine calls that come in on my PRI. BUT at least from this VOIP source the To field which is my RDNIS information for these calls, doesn't actually fill into ${CALLERID(rdnis). But as you can see I'm getting the information. My question is, Does

Ok I have a queue that is working perfectly. The problem is when one of the agents is outside the building on an external phone line (say a cell phone). My telco hangs up on the call . I think the telco is hanging up on these calls because there is no CID attached. (I know my telco wont connect calls without ANI, so that is what it is my assumption) So first I need to prove my assumption

I'm just trying to make a real simple Survey via php. Just want it to play the Question Files, wait for a response, save the response into the correct variable and then email it all. I have no issue playing the audio or emailing. But I can't get it to wait for digits or to properly capture those digits into the variables. I know the code is technically right since the emails have this

Alright I have a SIP phone located off premises with a very annoying issue. Well I say a sip phone it is actually two phones hooked to a Cisco Spa 2102 Link: http://www.cisco.com/en/US/products/ps10026/index.html Each phone being a different line/extension. Alright either line can ALWAYS make outbound calls no issue. The problem is on the Inbound side. I'm completely stumped as

I have the below script that doesn't seem to be working. I don't know if I have something in the script wrong that I am just missing. Or if I don't have the php.ini set correctly for emailing This is the CLI output -- Executing [4099XXXXXX at port3_real:1] Goto("DAHDI/50-1", "newhire,s,1") in new stack -- Goto (newhire,s,1) -- Executing [s at

Ok I have a queue that is working perfectly. The problem is when one of the agents is outside the building on an external phone line (say a cell phone). My telco hangs up on the call . I think the telco is hanging up on these calls because there is no CID attached. (I know my telco wont connect calls without ANI, so that is what it is my assumption) So first I need to prove my assumption

Alright I know how to do basic IVR in *. But what I'm working on trying to do now is a survey. I've found very little things out there on google or the archives for how to do surveys with the * ivr. Here is more or less what I'm trying to accomplish 1. Call comes in Plays Greeting 2. Starts Survey 3. Ask Q1, Record the answer (voice responses) repeat this

First off this is not my work for extensions.conf it is modified from http://leifmadsen.wordpress.com/2009/07/15/migrating-from-agentcallbackl ogin-to-standard-dialplan-methods-part-1/ So credit to Leif Madsen <http://www.leifmadsen.com> But as to my question [AgentLogin] ;A replaced version of AgentCallbackLogin() using a GoSub() ; exten =>

Trying to configure IAX for use I think I have everything set right. But my IAX phone wont connect. When I run wireshark I'm seeing this Note if above screenshot from wireshark does not show here is a link for it: http://img402.imageshack.us/i/tempe.jpg/ I've tried a variety of setups in my IAX.conf (they all end up with the same issue, tried just bindaddr=0.0.0.0 with

Hi I am currently using 1.2.x and 1.4.x behind OpenSER. One of the things I do on INVITES is to re-authenticate the user from OpenSER. Then when the INVITE gets passed to Asterisk I capture the AUTH to a variable in the dialplan and pass to an AGI script. I am now trying to set the same thing up in 1.6 However because the argument delimter in 1.6 has changed from pipe to comma this breaks as the

It might be worth mentioning the voip call is coming from a number we have thru bandwidth.com in case anyone uses them. James Shigley From: James A. Shigley Sent: Wednesday, December 02, 2009 3:06 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users] Variable Name needed That wasn't it either. I tried a few other likely fields from

Hello All - I've been poking around the past few weeks, trying to familiarize myself with all of this. I am new to Linux, VoIP and Asterisk -- to be complete. This is my first exposure to all of these technologies. I installed AsteriskNow on my old dual Pentium 833mhz Dell PowerEdge 2400 and the install went well. I can log in and poke around in Linux and I even configured the box to be

Hi there, this is the first time that I'm building an Asterisk-server. I have compiled Asterisk together with Zaptel on an CentOS 5.3-system. Zaptel is for later, when configuring the POTS-line. Now first internal communication with SIP. Thought it would go easier... I have 2 Grandstream IP-phones : BT-201 and GXP-1200. These are my settings : sip.conf : [root at asterisk asterisk]# cat

AGI is executable. =20 Then run 'agi debug' from the asterisk cli, place a call and see what was send and receive from your agi =20 From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of James A. Shigley Sent: April-23-09 12:26 PM To: asterisk-users at lists.digium.com Subject: [asterisk-users] AGI PHP script =20 I have the

Hi, Can I set up '#' as dial key using the extensions fxs? I use chan_dahdi, and a TDM400P card. I'm testing and, nothing happens when I press #. thanks. -- Marcus ____________________________________________________________________________________ Veja quais s?o os assuntos do momento no Yahoo! +Buscados http://br.maisbuscados.yahoo.com -------------- next part

Dear All On my CentOS 5 server , I have upgraded my Asterisk from 1.4 to 1.6.2 but its CLI help does not show sip and when dialing outward sip it complains as 'sip not implemented' . Can you please let me know what is wrong my case here ? Thank you -------------- next part -------------- An HTML attachment was scrubbed... URL:

is executable. Then run 'agi debug' from the asterisk cli, place a call and see what was send and receive from your agi From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of James A. Shigley Sent: April-23-09 12:26 PM To: asterisk-users at lists.digium.com Subject: [asterisk-users] AGI PHP script I have the below

Telco, location, ect?) At X times of day? =20 Ect, ect. =20 It sounds like bleed over, which can be causes by some many things the best place to start is to find a pattern if there is one. =20 James Shigley Monroe Telephone Answering Service =20 From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David @ULC Sent: Tuesday, May

Hello, I'm running revision 10622:de9d6dae7fe5 on AIX 5.3 with some local mods for our inbox hash function. I'm having a problem doing a "select inbox" when I use the mbox_snarf plugin. When I run truss on the process I see the following stat calls: 614528: kread(9, " 1 s e l e c t i n b".., 4096) = 15 614528: statx("/gpfs/inbox/14/tstem38",