similar to: One way audio with Grandstream HT503

I have an Asterisk server it runs great with SIP phones, soft SIP phones (twinkle) and a soft SIP phone app on my Android phone but I am having problems getting two ATA boxes working. I have a Linksys PAP2T, it is unlocked and I have used them before with no problems. I was able to receive calls with from any local SIP phone or from my Link2VoIP connection via the Internet but it could not call

the legs separately as if they were not related to the same call. So the ingress leg negotiates ulaw, and despite it knowing that the peer also supports g729 fails the call since it's already decided on ulaw and the egress leg only accepts g729. If this is design intent I'm wondering if there is demand enough to justify a feature request? Any advice on how I can work around this issue?

Hi people, I would like to read your suggestions as to where the issue might be. ATA286=Grandstream Budgetone ATA 286 in SIP mode. One Lan Port and one FXS port. TDM04B= 4 FXO signal fxls There is a 8FXO-to-SIP unit in this scenario that works perfectly so i will not make mention of it. PSTN----VOIPprovider---Internet---ATA286------tdm04b---Asterisk1.2.-13 Asterisk is being used as a meetme

Running build 1.8.5.0 (compiled from source) I seem to be having an issue with codec negotiation. I have a Grandstream HT503 FXO port connected to a pstn line, a Polycom SP501, and a SIP trunk with callwithus. What I'm essentially looking to accomplish is for ulaw or g729 (preferably ulaw) to be used to the Grandstream FXO or any other internal endpoint, and for g729 only to be used outbound

Hello list, I read on voip-info.org that Asterisk 1.4 support T38 passthrough. So I guess this means that I can have a Grandstream HT503 with T38 support and an analogue faxmachine on the other side of my Asterisk and a T38-account with a ITSP on the other side of my Asterisk machine, right ?! The fax coming from the faxmachine passes the HT503 to my Asterisk and my Asterisk sends the fax to

Hello. Sorry to repost this message but, I don't have the original message in my inbox nor in my sent box. Well, last week I posted a problem I am having trying to use an asterisk server use a voip provider and a pstn. Pstn works fine but, I cant even connect to my provider's server. I don't know what I'm doing wrong. I tried using a soft phone and I'm able to register and

Hi everyone, I have a number of SIP registrations going fine, but am trying to get a new provider going, and they have no sample Asterisk SIP config. They have been helpful, but keep falling back to the way they "think" packets should be flowing, and I've been trying to figure out how the Asterisk config should look like to get the SIP packet to look correct. Now, they say that

I have been trying to make password changing work with Samba from a Windows 95 clients. All the workstations use nonencrypted passwords. The server is SCO Open Server, Samba 1.9.18p10. The relevant lines of smb.conf are passwd chat = *Old*password* %o\n "1):" \n *New*password* %n\n *Re-enter*password* %n \n passwd chat debug = yes passwd program = /bin/passwd unix password sync = yes

Hi guys, I have an Alcatel 4200 with a ISDN board pluged in the asterisk server with TE110P. Input calls VOIP Proider ---> Asterisk ---> Alcatel Output Calls VOIP Proider <--- Asterisk <--- Alcatel In alcatel phones, users should dial 2 for take a line tone and can dial. At this point start my problems: 1. When users dial 2 on phone (alcatel) they don't received a dial tone,

Hello, The VDS servers are not accessible at some times and they are not responding to ping requests. xm list command is working fine. When we check the status of xend service it is shown to be running. But individual VDS''s are not responding. When we restart xend service, it begins to work. Ping will also work. Similar issue is there with 3 xen servers we have. Some times even after

Hi, I'm having difficulties with using DUNDi between two servers. If it were three I think I could control looping by limiting TTL, but with two I'm not sure how to prevent a loop causing bad things to happen. I've tried ttl=1 but things still blow up. The DUNDi configurations are pretty simple and work just fine in both directions as long as only one of them is using the switch

Dear All, I am trying to recieve call from inbound proxy then route to internal peer (localhost) and then route to outgoing sip proxy but it failing with subject error. Can any one please correct me what i am doing wrong in below config. SIP.conf [Inbound] type=peer context=introuting host=184.107.XXX.XXX disallow=all allow=all [astinside] type=peer context=introutingB host=localhost

Can someone tell me what I am doing wrong? Why doesn't CDR(duration) or CDR(billsec) return the correct values? cdr.conf endbeforehexten=yes extensions.conf [macro-Dial] ; ${ARG1} - Dial String exten => s,1,Dial(${ARG1},,M(post-dial)) exten => h,1,NoOp(Call was hung up - ${CDR(duration)} seconds long, billed for ${CDR(billsec)} seconds) The log shows: -- Executing [h

Hi list, My Asterisk config for outgoing calls is the following: exten => s,1,Dial(SIP/${MACRO_EXTEN}@voipprovider,60,g) exten => s,n,GotoIf($[\"${ANSWEREDTIME}\" = \"\"]?pri:hang) exten => s,n(pri),NoOp(Problems with voip provider trying PRI) exten => s,n,Dial(Zap/g2/${MACRO_EXTEN},60,g) exten => s,n(hang),HangUp in most cases it works well but, if my

Hi, Following the wiki page Setting_up_a_Share_Using_Windows_ACLs windows shows me this error after clicking on Shares: Disk Management could not start the Virtual Disk Service (VDS) on 'COMPUTER'. This can happen if the remote computer does not support VDS, or if a connection cannot be established because it was blocked by Windows Firewall. Tested on a new provisioned AD-DC server.

Evening everyone (obviously depends on when you're readin this, but hey). I'm trying to set up a multi * server situation, and am falling over at the second server, and after a day of google etc, have come up against somewhat of a brick wall. I can make calls each way between the two servers no problem, and can include the required extension at the remote * server as part of my main

Kirtland Air Force Base has denied approval for the use of R on its Windows network. Some of their objections seem a bit strange, but some appear to be legitimate. In particular, they have detected registry "vulnerabilities" which are detailed in the attachment. I know nothing about Windows registry vulnerabilities. If any of these issues are legitimate concerns,

[Posted here becasue your mail server is rejecting my direct reply to you.] Hi Martin, AFAIK SIP can run on both UDP and TCP but I have only seen it used over UDP.. :) To setup the GS phones you need to open up the following ports (If its still set at the defaults)... UDP/5060 UDP/5004 UDP/5005 UDP/5006 UDP/5007 I have not tested the GS phone through a firewall yet but this config should

[18884732963 at from-fax-machine:... - your call is hitting the from-fax-machine context - yet your 'fax' exten is in the from-pstn-4 context. See the "[2011-03-17 13:40:29.6] NOTICE[8825] chan_dahdi.c: Fax detected, but no fax extension" line. When Asterisk detects an incoming fax tone - it tries to automagically route the call to the 'fax' extension in the SAME

On my Grandstream GXP 2010 I have the possibility for 6 channels and thus 6 different accounts... Line 1 I define an account that registers directly to an online Asterisk-server, somewhere in a datacentre. Line 2 I define an account that registers to the local Asterisk-server (NSLU2 unslung) When I activate both accounts, only the first account (to the Asterisk-server on the internet) registers.