similar to: 10/100 voip phones and gigabit connection

Hello list, I am doing some work for a non profit group. As part of this, I am going to be putting in a 30 handset Asterisk solution. We are trying to keep the costs down as much as possible, as this job includes cabling, I am looking at POE solutions. On the switch side, I am considering something like some Netgear ProSafe FS726TP 24 port switches, or maybe the equivalent Linksys SRW224MP 24

Hi all, After running fine for a few months now asterisk seems to hang frequently , still functioning but the DAHDI channels seem busy (users report a busy signal when calling or being called) A reboot will allow it to run for another day or maybe 2 or 3 till the problem occurs again. running stock Asterisk 1.6.2.9-2+squeeze2 on Debian with stock kernel 2.6.32-5-686 i get the following

I'm trying to understand why vendors keep making 100Mbps integrated 1-port switches in their hardware SIP phones. Even the recently-announced D40 and D50 Digium phones are limited to 100Mbps. Only the more expensive models (like the D70) can run at 1000Mbps. However, you can't expect a firm with hundreds of extensions to buy the most expensive model... And gigabit speed is important when

On Fri, 20 Feb 2015 13:05:56 -0700, Harry McGregor wrote: > For a very basic setup it would work, but I would suggest POE at a > minimum, and vlan support if possible. > > Gigabit uplinks, 10/100 for the poe ports > > http://www.amazon.com/NETGEAR-ProSAFE-M4100-D10-POE-Ethernet-Managed/dp/ B00AUEYX0Y/ref=sr_1_3?ie=UTF8&qid=1424462577&sr=8-3&keywords=netgear+poe

Hi, Are there any resellers of phones that can take power over ethernet in Australia? All I can find for sale online is the BT-10[12], which is cheap but not featureful enough, and the Snom 190, which is about right, but neither of them support PoE. I'm particularly intereseted in the Snom 220 with the keypad expansion for our receptionist. Although, could you make a PoE split-out cable

Hi all, I have two HP DL145 G1 machines, running centos4 (2.6.9-22.0.2.ELsmp). Nics are recognized as: eth0: Tigon3 [partno(BCM95704) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:00:1a:19:f1:05 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap [1] eth1: Tigon3 [partno(BCM95704) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet

Greetings, I mailed the list regarding an intercom system some months ago and we came to the conclusion that I should purchase a Polycom 501 phone. I'm now considering the purchase for this year, and I'm now wondering between the Polycom 501 and the 320 for the intercom. I don't need the spare ethernet on the phone because I would like to have my voice network separate from my

Hello, Beside Cisco 79x1-GE, I'm not aware of any Gigabit SIP Phone. Did I miss something ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070612/b9b701b3/attachment.htm

>But currently, I only have one ethernet jack per office. Routing >another 60 or so ports would add a very substantial expense in both >cabling and backbone expansion (what category ethernet is required, >BTW?). Most decent phones have an ethernet passthrough (2 port) so you can plug in your PC. As long as your LAN is decent (Cat5 100baseT switched) the overhead using VoIP is

Most manufacturers charge in excess of $80 to upgrade from a 10/100 switch to a 10/100/1000 switch built into the phone. The cost might have been in the chipset 5 years ago but I can get a 5 port gigabit switch for $30. What are most folks using for people that need gigabit to the desktop and don't want to run another cable? -Matt

Pardon, this might be off-topic. I'm reading: http://en.wikipedia.org/wiki/Network_switch For a setup of ~5 agents, would I be wrong in thinking that a generic 16 port unmanaged switch would fit the bill? The first model to come up for me in an Amazon search is: http://support.netgear.com/product/fs116 Is this a reasonable choice? Would I be wrong in thinking that most any Fast

Hi! I?m having trubbles with the speed on my samba server, I just uppgraded to gigabit (Realtek 8169 NIC) at home when i copy stuff from the samba server i get around 5-6Mb/sec and if i use ftp to access the same file on the same server i get almost 30Mb/sec does anyone have a clue what causes this problem? When i used my old 3com 905c for the local net i got normal 100Mbit speed (around

I know this is on the wiki, I just want to confirm so I don't blow up my cisco phones. I've got several cisco 7940's all running using cisco power cubes. However, my boss wants me to switch just a few over to poe, but doesn't want to fork out the dough for a nice cisco poe switch, or anybody else's poe switch for that matter. So my question is, what is the '99.999%

Any recommendations on an economical layer 3 switch? Preferably something that you have hands on experience with connecting to IP phones with attached PCs? Specifically I need the ability to set the VLAN in the phone to tag voice packets and to set a native VLAN on a per port basis on the switch to put the untagged packets from the attached PC into a separate VLAN. POE is not a requirement

I'm looking for 24 or 48 port IEEE802.3af POE injector. Any recommendation? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070720/3886655b/attachment.htm

Here's a weird one that may have nothing to do with Samba and more to do with network frame sizes. I have recently upgraded the network infrastructure to support gigabit speeds. - OSX Tiger to OSX Tiger file transfers operate at gigabit speeds. - Samba 3.0.23C (Suse 10) to OSX Tiger file transfers operate at gigabit speeds. - BUT OSX Tiger to Samba 3.0.23C (Suse 10) file transfers

For an office that is using VoIP phones to connect to Asterisk, is gigabit ethernet really necessary for the Asterisk box to connect to the switch? I know that I won't even approach the limits of 100 Mbps, but would gigabit help with latency / collisions when several calls are underway? The fact is, anything going outside the office will be over a data T1, so intuition tells me that 100

Hi there, what phones are available that have two ethernet ports? I want to do some cabling at a new installation and i heard there are such phones (SIP i guess) out there. That way i dont have to run two cat5 to the user desktop. I think 3COM had one but can't find the web site reference for the two port phone thanks, erick

I am experiencing poor network performance on Dom0. When i ping other hosts on the same LAN, packets are out of order, and they show response times ranging from < 1 ms to several seconds, and some packets get lost. For example, a typical ping result looks like this: 87 packets transmitted, 80 received, +3 errors, 8% packet loss, time 86038ms rtt min/avg/max/mdev =

I'm having problem powering Cisco phone's (7940 and 7905) on Linksys SRW224P switch (with PoE functionality). I have tested three phone's, one is working (7905) and two aren't (7905 and 7940). I have plugged all three phones on same switch port with same cable! Do I need to change anything in phone configuration? Is there something wrong with Linksys switch? How can I troubleshoot